#107

Yes, should be milliseconds.

It appears that that’s right, in Mono mode pressure and mod CCs get a 5ms slew, in fixed no slew is applied. This would need a little rework to do what you want probably but not too bad.

1 Like
#108

Ah snap.

Yeah, it would be great if it was possible to apply (the same) slew to all of the MIDI modes as a single param.

I only really noticed as the pressure data from the BopPad is real… steppy sounding.

#109

If I can remember my thinking way back when the reason that FIXED didn’t obey slew (or have any by default) was that I was operating under the assumption folks using FIXED were likely using it for some non-voiced / computer driven purpose. …I have nothing against changing that.

UPDATE: …looking at the code I’m reminded of another reason it is the way it is. IIRC the various “slew” commands which were available on the teletype at the time (like for the JF voice modes) tended to target pitch CV. The other reason was probably avoiding the complexity with keeping track of different slew values per output per mode.

#110

Yeah, in thinking about it further, the slew wouldn’t be useful for certain outputs (e.g. pitch/note), so I can just apply a slew externally the “pressure” output from the BopPad if needed.

(in an ideal, but impractical, world, there would be a per-CVx output slew in FIXED mode)

#112

Is there any script available for Ansible that let you use ARC to control 4 LFOs?-

#113

Are you thinking of Cycles?

1 Like
#114