#204

Can’t thank you enough for this! I was one of the folks that couldn’t get the original earthsea module to behave in my system no matter what I tried.

One thing I notice with this version; however, is that notes/arps are being retriggered/reset when I release a note/button. This makes it difficult to play one note to another with even timing unless I actually time my release before pressing another button (which feels really odd). I’m guessing this is somehow a result of implementing polyphony or note-stealing in earthsea?

I’m running earthsea in arp mode and loop mode with only channel 1 gate and cv active.

I know norns is upon us, but if you could look into this when you get a moment it would be much appreciated! :blush:

#205

not sure i understand correctly, could you list the steps and the desired outcome vs what actually happens?

#206

Sure, no problem:

I record a pattern, activate arp and loop, press a button (notes/gates sound). Depress/release the button, and upon releasing the note/gate pattern sounds again. Normally, if you press down a key (on a keyboard for example) the note sounds and then when you release the key, you hear nothing. That’s not what is happening-I’m hearing the note/arp pattern being triggered again upon release. It may be easily overlooked, but try it and see.

#207

got it, an easy fix, i’ll post a new version tonight.

7 Likes
#208

20 characters of sweeeeet! :pray:

#209

here it is:
ansible.hex
ansible-1.6.1.es.zip

^ this is basically the official 1.6.1 + earthsea

manual
quick reference

21 Likes
Ansible: help and issues
#210

thank you so much!!! :heart_eyes:

#211

Just tested and it’s perfect; thank you!

1 Like
#212

So that includes all the ratcheting stuff and whatnot, too? :mage:

#213

looks like it - it’ll have whatever is in this release:

2 Likes
#214

Im a bit embarrassed to ask you to walk me through this considering how much time and effort you’ve put into this project but… Im struggling with the hex file. I know basically nothing beyond the most basic functions of a computer so i’m most certainly missing something (many things) i’m on a mac by the way.

I did a few quick searches in the forum and the wider internet and it seems (perhaps) a zip file with the flash command would help?

I have successfully updated ansible firmware in the past with a command file.

i’m not confident that im using these terms correctly so again I apologize for asking you to hold my hand through this

#215

I was wondering the same, don’t feel badly

1 Like
#216

This is how I do it, but checked the forum to make sure this is common wisdom:

You can use another ansible .zip and replace the hex file, then run the update.

1 Like
#217

if you don’t have a .zip handy, you can grab one here

edit: hope that helps!

#218

sorry - i should’ve posted a zip as well!

give this a try: ansible-1.6.1.es.zip (84.5 KB)

5 Likes
#219

It worked!!! computers are magic!!! thanks again!!!

2 Likes
#220

thanks for confirming! i edited my post to include the zip.

2 Likes
#221

would it be possible to add the TT commands for this version of ES? And maybe a few new ones :slight_smile:
something like this perhaps:

AES.PRESET
AES.PATTERN
AES.TRANS
etc. including all the commands applicable to this version.

then maybe some new ones that address the polyphonic stuff?

AES.TRANS x y (x being the voice 1-4 y being the transposition value)
AES.MUTE x y (x being the voice 1 or 0 for on off maybe?)
AES.START
AES.DIR x (0 for forward 1 for reverse)

i love all the control you get with kria and TT so these thing occurred to me as i use ES all the time as well. :slight_smile:

#222

likely not in this version, but definitely when i get the time to work on a new version. and yeah, makes sense to add polyphonic ops. i’ll probably reuse the existing namespace though so the same set of ops can be used for any version of earthsea.

1 Like
#223

awesome! i assumed for whatever reason that the existing ops will only work on the original earthsea module hence adding the A. perhaps i should have tried before i posted this, but do the existing ops work with this version?