#450

doing it right now! will post results in 5 minitz

#451

btw : have you checked both zip and hex? cause i d\lded the zip

#452

ok, now i used the .hex and not the zip.
it works flawlessly…thanks @scanner_darkly for your awesome work!

1 Like
#453

glad it worked! yeah both zip and hex should’ve been updated but i just reuploaded them again just in case. thanks for help with testing!

1 Like
#454

you are very welcome :slight_smile:
beautiful implementation of the keypad and the rests are a great addition! the unclocked mode is superb but i often use earthsea for rapid fire sliced breakbeats triggering so i have to use it clocked, the introduction of rests is a really great addition for me!

2 Likes
#455

@scanner_darkly Hey, so I’ve tried updating with both the zipped version and the loose hex version, but I don’t see the scales anywhere in the pattern view. everything else works fine and I’m sure that I didn’t load an old firmware by mistake. so strange…

#456

strange, i just tried updating with the hex posted and i can see the scales. are you using grayscale grid? on non vb grids scales that are not selected won’t be visible. what happens if you press in that area? that’s 8 rightmost columns, rows 4&5 from the top.

#457

2018 grid, and nothing happens when I press those keys. I’ll have to wait until tomorrow to do anything, but ideas are welcome

#458

can you take a pic of the pattern view?

#459

Of course I would start with Earthsea to learn my Grid instead of Kria or MeadowPhysics. My question is that when I choose a scale on Earthsea the pattern chosen doesn’t affect the illuminated layout as all 16 display options show the same pattern. Is this because I’ve not setup and saved any scales in Kria or MeadowPhysics yet?

#460

i can perfectly see the scales.
if you’ve not setup custom scales you should have the default ansible ones (7 or 8, the first row) if you haven’t overwritten them with nothing (chromatic scale)

2 Likes
#461

Got them…I was looking for something more apparent like what was shown in the documentation for MeadowPhysics, but on looking at what you might be suggesting should be there between 7 & 8 I started to see the pattern change signifying the various scales. Thanks.

1 Like
#462

i meant the first 7 or 8 preset scales in the kria scale editor

#463

sorry for the delay…

image
29260B81-137E-407C-867D-04F3B3465274.jpeg4032×3024 1.69 MB

#464

got it! I originally ran the firmware update from a dfu folder I created on my desktop (so I wouldn’t have to dig too deep when changing directories), and must have been missing a key component in the process. went back to my original dfu folder through the cmd prompt, ran the update, and it finally took! strange how the update worked at all (albeit with the missing components)the first few times.

Update is a dream; many thanks!

2 Likes
#465

Hi there, so I was wondering if the scales are saved with the preset?

Its seems like its not the case on firmware 1.6.1 ported with Earthsea version.

Thanks for your help!

#466

scales are saved with presets, yes. i just tried saving a scale from both kria and meadowphysics and it worked for me.

can you provide your exact steps and i’ll see if i can reproduce the issue? also check if other changes are saved.

#467

I’m experiencing some mysterious behaviour with the pattern functionality with Kria after I updated my Ansible with this latest firmware. When I copy/paste a pattern to another step it seems to do so, but the Grid jumps back to the previous pattern. I can upload a video if that’s helpful. From time to time the patterns get mixed up aswell, but I can’t seem to reproduce that.

#468

it’d be super helpful if you could try replicating the problem with the official ansible firmware. i really doubt anything in earthsea would cause a change in functionality in kria, but would be good to confirm for sure.

#469

Ok, I’ll try that asap and report back.