#27

So with this connector I can power my grid or arc externally?
I just got a beat step pro in the post yesterday, and i have been suffering a bit from noise when plugging in my arc, but can i just plug my cable from ansible to “pc”. And then power to pwer (of course…), and my arc or grid, through an adapter, to the male end of the beatstep pro cable? This would be the way to go right?
I have an adapter coming, I will be able to try it monday or tuesday and see if it works.

#28

It’s micro usb-b, not usb-c, but yes adapters is needed

1 Like
New to monome, and monome + modular: ask questions here
Mobile Modular
#29

I tried one of these splitters that i bought on ebay “USB 2.0 Female to 2 Dual USB Male Power Adapter Y Splitter Cable Cord Connector”. It reduced the buzzing by 70-80%. I guess it’s still drawing a small amount of power from the rack. Maybe a “data only” usb cable to connect between ansible and grid will cut out the remaining power draw.

image.jpg1342×768 154 KB

2 Likes
Monome Switch - out of production?
Grid ops / integration
Monome 64 walnut and ext5v/external power
External grid power - ext5v alternative
#30

A data only usb cable (red wire cut) going into ansible did the trick with the usb splitter. No more buzz/whine! $6 all up.

3 Likes
#31

woah! can you briefly explain? Y plug – one to power (iphone charger-like?), one to ansible, then another cable to monome which you opened and clipped the red wire?

good research! very cool to hear that it’s working!

1 Like
#32

Yeah that’s exactly right…The red wire is the +5V.

image.jpg2134×1263 193 KB

cutting the wire…

image.jpg948×1264 209 KB

hope this helps someone along the way

12 Likes
External grid power - ext5v alternative
#33

I’m using an old Nexus 5 charger which is rated 1.2A but any 5V mobile charger would do. The grid doesn’t use much. I’ve seen reference to 0.6A max with all lights on.

1 Like
#34

nice! this is the same concept as switch, ext5v, and offworld. works.

1 Like
#35

always cut the red wire!

(this is great, i love these kinds of fixes)

2 Likes
#36

Seeing this I wonder if it would be as easy to DIY or modify the existing switch to work with three modules and one grid.

Is it just on more USB output and DP3T switch?

#37

yes indeed yes

easy diy

#38

or a switch for 2 devices and one module! say, to switch ansible between arc/grid. hoping somebody can make this happen…

#39

i have an ext5v and it doesn’t remove any noise when grid is connected. would cutting the red wire in my usb cable going to ansible from the ext5v effectively do what was posted above and get rid of the noise? also going to get some ground lifts today and see if that does the trick.

2 Likes
#40

the red wire in the usb cable isn’t connected to anything-- the ext5v’s purpose is to leave it unconnected and get power from the supply instead.

yes, try a ground lift on your modular’s power supply. what power supply are you using?

1 Like
#41

as a recap
1 - find a Y splitter DATA-POWER
2 - cut the red wire
3 - enjoy

???right???

if is that simple you are my solution to the 1010bitbox maxing power problem!!!

i’ll try

thanks so much guy!!!
best forum ever!!!

#42

here’s a better solution-- power to 2 devices.

1 Like
#43

Thanks Brian…problem is US shipping…
in europe i think is more manageable to get something like this

2 Likes
#44

Last time I ordered, Oshpark had free shipping to EU :wink:
edit: you end up with 3 boards, other people here might be interested in one too though

Mannequins RIP, RIP?
#45

Could someone who already uses one of these offworld pcb things maybe post a photo of it in real life?

As a non diy-person, I have problems understanding what it even is.

1 Like
#46

Agreed

Anybody built one?