#167

It might be shield, you don’t need to cut it all, just separate enough to see the wires inside.

#168

okay I have a look thanks for that !

#169

I believe it’s the red wire that carries power

#170

@HateNames

WechatIMG8
WechatIMG8828×1792 209 KB
WechatIMG7
WechatIMG7828×1792 231 KB

Well looking at whats underneath there appears to be 8 cables.

Black , Red, 2 Whites, 2 cables in blue foil and a thin copper ones. I had to get rid off the silver tweed wrapping around everything to get inside.

Do you think the red cable is the one to cut? :stuck_out_tongue_winking_eye: thanks

#171

Mine just had red, black, green, white (and the shield) when I did it. I’m pretty sure I cut the red but I don’t want to tell you something which ends up messing up your cable, I’m not the most knowledgable person on this stuff (especially in llllllll company). Maybe someone else will chime in.

#172

thanks for that I’ll wait a bit and see what others have to say.

#173

Just did a search, everyone I could find in the thread above cut the red wire!

#175

yeh thats what I thought. thanks a lot for the help!

Hey the red cable did it!

I’m powering the grid with a power bank, doyou know if I can power it via a power adaptor connected to the wall?

thanks!

#176

Glad it worked! I power mine with a regular wall plug to USB adapter, like the one you probably use to charge your phone.

#177

cool! happy it worked out! thanks

1 Like
#178

What does one do if there is no red cable, only white, black, blue and green? Or should I perhaps cut the tiny golden threds?

cable2
cable21000×666 371 KB

#179

Black is likely ground, green and white are likely data, so blue is probably your 5V power. The threads are for the shield; no need to mess with them unless you’re trying to ground lift your system.

1 Like
#180

Could anyone second this?

#181

I can picture the beads of sweat on your head while cutting the blue wire. :grin:

#182

So, I didn’t dare to cut it yet. But I’m also questioning whether I’m doing it the right way. If I cut it here (see picture), won’t I eliminate all power to Grid, meaning it won’t be powered at all?

IMG_6309b
IMG_6309b1000×750 609 KB

"A" is the main plug that I’m using to connect to Ansible.

"B" goes to the USB port of my Konstant Lab StrongPWR, but it doesn’t seem to make a difference (still noisy). But if I do it the other way (“B” to Ansible, “A” to StrongPWR), nothing happens, meaning Grid won’t power up.

"C" --> Grid.

#183

I’d love a second opinion from anyone who knows this stuff.

  1. Cut the blue wire?
  2. Am I cutting the correct part of the wire (between A and C)?

Thanks

#184

b ansible
a power
c grid

cut between a and b

yes blue, though it really should be red

1 Like
#186

That makes sense. I probably need a different cable though, because Grid doesn’t power up when B goes into Ansible. Maybe that wire doesn’t transfer data…

#188

this is possibly a “double power” cable w/o data wires between a and b ???

but that doesn’t make sense why it wouldn’t power. it’s a confusing cable.

#189

I’ll just get a different cable and try again. Thank you anyway! :slight_smile: