Awake-mod v1.0.8

shoggoth · 2020-12-28T01:44:41.139Z

Updated to 1.0.2

Added better display for off/inactive mod steps
Added “mute” mod value
Extended mod transposition to -7 to 8 range
Added dusty pic to post
Added better indicator when mod step is active

This has been MASSIVELY fun to work on. If you have a suggestion for better app or parameter naming (MOD/TRIG), I’m all ears.

shoggoth · 2020-12-29T02:34:14.465Z

Updated to v1.0.3

Added FNDTN page/feature

shoggoth · 2020-12-29T19:21:51.050Z

Demo on IG

shoggoth · 2020-12-31T02:57:40.468Z

Updated to v1.0.4

Added XPLSN page/feature
Tweaked FNDTN display
FNDTN auto sets to either startup sequence or last preset

Deru · 2020-12-31T05:45:03.931Z

Really enjoying these additions to Awake thanks.

I’ve long wanted performative presets mapped out to a second page on Grid and this is giving me encouragement to learn how to do it myself

DoS · 2020-12-31T09:10:09.458Z

shoggoth:

–XPLSN–

This version of Awake has been a lot of fun to explore, and the FNDTN has been especially useful - now looking forward to the XPLSNs!

shoggoth · 2020-12-31T17:46:19.665Z

So glad to hear!

Playing around with XPLSNs last night, I realize I need a ‘light fuse’ button. Having the fuse immediately active can be a bit unexpected especially if the sequence is about to end.

Other thoughts:
Add a XPLSN type for inversion/mirroring.
Add a button to immediately apply the XPLSN or activate the fuse at 1.
Not totally sure XPLSNs are ‘musically useful’ - curious to hear impressions.

@Deru I’ll see if I can expand the code to set multiple FNDTNs, requires some refactoring.

Deru · 2020-12-31T18:10:16.995Z

shoggoth:

I’ll see if I can expand the code to set multiple FNDTNs, requires some refactoring.

That would be really interesting thanks!
I wonder if they could be pulled from other presets? Hmmm… Would that make sense?

shoggoth · 2021-01-02T01:28:37.438Z

Updated to v1.0.5

XPLSN changes:

Added light fuse/snuff fuse so fuse doesnt start immediately after you select a value
Added light quick fuse to light fuse = 1 with a button
Added types fndtn1-4 to support new fndtn presets

FNDTN changes:

Added 1-4 preset slots (this could be literally any amount but felt like 4 was just right)
Changed reset to foundation behavior - it will no longer reset the sequence position to start

Note: setting up complimentary foundations and changing them with XPLSNs is lovely, since XPLSNs always activate right as the sequence restarts

@Deru not sure how to pull from the ‘top level’ preset data but I feel like FNDTN preset slots work pretty well! I actually need to look into whether these are saved with the ‘top level’ presets… hmm, probably not. I hope to eventually get a grid and would love to surface some this stuff to the grid interface for performance purposes.

Deru · 2021-01-02T03:08:45.971Z

Amazing. I’ll check this out soon thanks.

DoS · 2021-01-02T18:26:40.200Z

I used the new fuses on Awake-Mod to control my modular for tonight’s Sonic Sound Synthesis interlude - it was really handy being able to set all the steps to change or revert to the foundation at a more or less known future point while tweaking the knobs on the other side of the studio. I’ll definitely be using this more and more.

shoggoth · 2021-01-03T15:56:04.858Z

That’s awesome! Is there a link/time stamp on the show where I could listen?

Updated to v1.0.6

Refactor additions to separate lua files
add OPTION octave down/up buttons
keyboard support - really opens up the performance capabilities!

Deru · 2021-01-03T17:25:35.708Z

I had a play with 1.0.5 last night and I think you’re right about the multiple fdntn presets. They’re great and pretty much serve my performance ideas. As you eluded to, if these function were mapped to the grid (saving and recalling) it would fully check that box I think. I’m sure this is a great first project for me so I’ll keep it in my ‘eventual’ pile unless someone else wants to get to it first!

Cheers for this script.

DoS · 2021-01-03T17:40:47.726Z

shoggoth:

a link/time stamp on the show where I could listen?

Just awaiting the upload to Mixcloud from the station - will post here when it’s available.

Update: online now at mixcloud

The first 2021 session has been archived at Mixcloud: Mixcloud

SPIKE · 2021-01-06T06:14:14.288Z

@shoggoth
i tried to update to 1.0.6 tonight.

all i get is an error:init message.
this was on multiple norns on the current OS.

thanks for any help!

shoggoth · 2021-01-06T12:30:54.595Z

Hmm… I recloned from github on my Norns to make sure I was getting the same copy as you and I don’t have any errors. Maybe try pulling again? If you still have an error, can you open maiden and copy/paste the error that’s posted to the matron console?

SPIKE · 2021-01-10T06:14:17.625Z

ok…
finally had a chance to get back to this.

just re-downloaded and installed from GitHub.

it was still giving me the error init thing on multiple norns.

just did a re-install on norns #1 and it loads and goes to the Read Me page and then it just jumps back to the primary OS screen that has SELECT> SYSTEM> SLEEP>.

here is the report from maiden:

Summary

script load: /home/we/dust/code/awake/awake-mod.lua

cleanup

script clear

including /home/we/dust/code/awake/lib/halfsecond.lua

including /home/we/dust/code/awake/lib/keyboard.lua

including /home/we/dust/code/awake/lib/fndtn.lua

including /home/we/dust/code/awake/lib/xplsn.lua

including /home/we/dust/code/awake/lib/mod.lua

script run

loading engine: PolyPerc

reading PMAP /home/we/dust/data/awake/awake-mod/awake-mod.pmap

m.read: /home/we/dust/data/awake/awake-mod/awake-mod.pmap not read.

Engine.register_commands; count: 6

___ engine commands ___

amp f

cutoff f

gain f

hz f

pw f

release f

___ polls ___

amp_in_l

amp_in_r

amp_out_l

amp_out_r

cpu_avg

cpu_peak

pitch_in_l

pitch_in_r

script init

starting halfsecond

pset >> read: /home/we/dust/data/awake/awake-mod/awake-mod-01.pset

pset :: /home/we/dust/data/awake/awake-mod/awake-mod-01.pset not read.

SCRIPT ERROR: init

/home/we/dust/code/awake/awake-mod.lua:337: attempt to call a nil value (field ‘pan’)

stack traceback:

/home/we/norns/lua/core/norns.lua:138: in field ‘pan’

/home/we/dust/code/awake/awake-mod.lua:337: in field ‘action’

/home/we/norns/lua/core/params/control.lua:104: in function ‘core/params/control.bang’

/home/we/norns/lua/core/paramset.lua:437: in function ‘core/paramset.bang’

/home/we/norns/lua/core/paramset.lua:430: in function ‘core/paramset.default’

/home/we/dust/code/awake/awake-mod.lua:351: in global ‘init’

/home/we/norns/lua/core/script.lua:105: in function ‘core/script.init’

[C]: in function ‘xpcall’

/home/we/norns/lua/core/norns.lua:139: in field ‘try’

/home/we/norns/lua/core/engine.lua:91: in function </home/we/norns/lua/core/engine.lua:89>

zebra · 2021-01-10T06:53:04.436Z

@SPIKE did you try nuking your ~/dust/data/awake-mod/ folder?

SPIKE · 2021-01-10T08:53:23.280Z

nuked it.
did a fresh install and a sleep.
now it goes back to the error:init message.
here’s the maiden data:

Summary

script load: /home/we/dust/code/awake-mod/awake-mod.lua

cleanup

script clear

including /home/we/dust/code/awake-mod/lib/halfsecond.lua

including /home/we/dust/code/awake-mod/lib/keyboard.lua

including /home/we/dust/code/awake-mod/lib/fndtn.lua

including /home/we/dust/code/awake-mod/lib/xplsn.lua

including /home/we/dust/code/awake-mod/lib/mod.lua

script run

loading engine: PolyPerc

reading PMAP /home/we/dust/data/awake-mod/awake-mod.pmap

m.read: /home/we/dust/data/awake-mod/awake-mod.pmap not read.

clock: ignoring resumption of canceled clock (no coroutine)

Engine.register_commands; count: 6

___ engine commands ___

amp f

cutoff f

gain f

hz f

pw f

release f

___ polls ___

amp_in_l

amp_in_r

amp_out_l

amp_out_r

cpu_avg

cpu_peak

pitch_in_l

pitch_in_r

script init

starting halfsecond

pset >> read: /home/we/dust/data/awake-mod/awake-mod-01.pset

pset :: /home/we/dust/data/awake-mod/awake-mod-01.pset not read.

SCRIPT ERROR: init

/home/we/dust/code/awake-mod/awake-mod.lua:337: attempt to call a nil value (field ‘pan’)

stack traceback:

/home/we/norns/lua/core/norns.lua:138: in field ‘pan’

/home/we/dust/code/awake-mod/awake-mod.lua:337: in field ‘action’

/home/we/norns/lua/core/params/control.lua:104: in function ‘core/params/control.bang’

/home/we/norns/lua/core/paramset.lua:437: in function ‘core/paramset.bang’

/home/we/norns/lua/core/paramset.lua:430: in function ‘core/paramset.default’

/home/we/dust/code/awake-mod/awake-mod.lua:351: in global ‘init’

/home/we/norns/lua/core/script.lua:105: in function ‘core/script.init’

[C]: in function ‘xpcall’

/home/we/norns/lua/core/norns.lua:139: in field ‘try’

/home/we/norns/lua/core/engine.lua:91: in function </home/we/norns/lua/core/engine.lua:89>

shoggoth · 2021-01-10T14:53:31.579Z

That is odd because I didnt touch anything with the engine parameters. Do you perhaps have a different version of the PolyPerc engine elsewhere where pan isn’t specified? It’s not part of my lib because I assume you have the standard awake installed and Norns barks if there are two of the same engine. Maybe try reinstalling vanilla awake since I rely on that engine?

Also - if anyone has suggestions on managing engine dependencies better, I’m interested (though should be fairly safe to assume everyone has vanilla awake/PolyPerc).

Also also - how do I tag this post with ‘Norns’?? It has totally escaped me