#235

I am not really experienced with GitHub, but submitted a PR that should add audio + crow out1+2 functionality. If someone wants to test I’ve attached the script here(I don’t have a crow myself, but audio out works at least):

awake.lua (13.0 KB)

4 Likes
#236

Thanks for taking the time to make the change and i will upload and test this evening!

1 Like
#237

Has anyone tried adding lfos to Awake before?

2 Likes
#238

I’m also having an issue saving step and loop data in psets.

Any ideas about the cause?

#239

I’m not sure what caused the problem with presets saving properly, but the next time I tried everything worked fine and continues to do so. Maybe make sure Awake is updated to the latest version?

#240

Updating seems to have done the trick!

Thanks!

1 Like
#241

Is it just me (or my midi setup), or did Awake at one point sync start/stop over midi and now doesnt?

1 Like
#242

I was attempting to get Awake playing with the Digitone last night and ran into some trouble. I was sending clock and notes, but it seemed like maybe there was a clock issue… though I’m not exactly sure. Digitone would play the sequence, and then intermittently cut out a few notes, then pick back up, and then cut out again, at what seemed to be rhythmic intervals (a few bars), but was also not quite perfectly timed.

I did get it working with Fugu and Kria, so I know the Digitone was receiving midi from Norns properly.

Any ideas?

#243

Hi @Xylr,
I had a similar problem and it was never solved. In this thread some of the things I tried are documented. It would be interesting to see if our problems are somehow connected.

1 Like
#244

i’m not sure why you’d need to send clock?

if you’re just sending notes, there’s no need for clock.

sending clock would suggest you’re using norns as a leader clock, whereupon the midi device would have a sequencer (or something) following the clock.

try turning off clock?

1 Like
#245

I don’t know why I am sending clock either. Great point.

@beat I will update you if I make any progress on this. I’m only connected to Digitone and the grid, and I am using a factory Norns. I’m pretty determined to get this working, so I will document my attempts well going forward.

#246

Were you having problem with just the awake sequence, or other tracks playing back on the Digitone along with what you were sending from Norns?

I just sent notes and clock from Awake and didn’t experience any dropouts. Are you using a midi interface or via usb? I tried with both and didn’t seem to have an issue.

1 Like
#247

I was using usb direct, but I can try a Mio2 as well. I was only having trouble with Awake… I didn’t try playing any sequenced tracks from Digitone simultaneously, but I was able to trigger notes while it was playing (if I understand your question correctly). As far as I can tell, all params were set correctly… but I’m going to be more thorough in documenting exactly what the setup is when I can get back to it tonight.

Kria and Fugu both worked properly.

#248

Cool, let us know. I’m happy to try things again to see if I can confirm/deny. :slight_smile:

#249

I just had an inspiring session with Awake controlling my Korg VolcaFM where I realized I can record the sequences of Awake into the Volca’s sequencer. Magic happens with the arp set to random.

I’m using an iConnect mio to get MIDI in and out of the Norns Shield btw. Works like a charm.

6 Likes
#250

going to give this a shot today

edit: didn’t try this out today. instead added "crow out 1+2 + crow ii JF" to the existing awake.lua on my norns and got lost in that. where did you throw those local's off to anyhow?

1 Like
#251

Here’s a version @noiserock helped me write with other output options. Maybe it can help you.awake.lua (13.2 KB)

1 Like
#252

It was actually loads of help! Slowly finding my bearings but being able to mod here and there has been an absolute pleasure. Thanks @jasper_ryder , @noiserock

2 Likes
#253

If one were keen to operate on clock divisions slower than 1:1, would this be the line to tinker with?

params:add{type = "number", id = "step_div", name = "step division", min = 1, max = 16, default = 4}

Should add that my use case involves Ableton Link.

#254

Hey all! I don’t know if it has already been talked here (remember some clock issue quick fix on maiden…) But as I am running awake-rings under the last firmware on a norns-shield, I can’t find a way to make it respond to start and stop messages as a slave device. It responds great to the incoming clock (tempo match), the device is properly set in midi parameters… But Awake is always running, restless…
Is there something that I missed in the parameters, or is this something which need some code swapping on maiden? Thanks for any info you could give me!!