#4

I think if I were to get another small case (if I had it to do over again), I probably would not have gotten the Doepfer Beauty Case. It offers minimal power. For a bit more, Intellijel has a 42 hp case (I think) and it has a row for little 1U tiles. I stuck with the Doepfer to force me NOT to expand though, but in your scenario it might be the right fit depending on how much you envision expanding. Pulp Logic has little cases too you might investigate.

#5

There are other options in addition to those already mentioned, but what the web is really missing is a modulargrid style site for eurorack cases. Hmph.

1 Like
#6

@sellanraa,

Thanks for the opinion on the Doepfer Beauty case. I was just looking at them on the bay of eeee’s. I am curious about moogs little cases now. Simple and not expensive.


They don’t have power with them though. I know monome used to sell a power supply of some kind but there aren’t any in the monome shop at the moment.

@jasonw22,
I haven’t explored modulargrid really. It seems they would have very much info on eurorack cases.

#7

Unfortunately modulargrid only has modules, no cases. Would be nice though!

1 Like
#8

Doepfer minicase here - its ok with switch for power, white whale + 20hp… usually i have a phonogene there, but i am always thinking about more modulation… i would like more room to expand…

i have a bigger 6u case also, with doepfer diy kit. i really recommend doepfer –
never had a power problem, using mutable volts for 5v.

1 Like
#9

I have frap.tools PLUS skiffs. They are beautiful modular pieces, 42hp each. I have an horizontal row of three (126hp) and 2 angled rows of 84hp made with 4 pieces (I will make them 126hp this summer I guess). The latter is pictured here: //// pictures //// and here: //// pictures ////

3 Likes
#10

@igormpc,
Thanks. The mini case is still a possibility for sure. Seems ideal for what I’m looking for.

@AlessandroBonino,
I really like the look of the two row case you have! I am trying for a very small footprint because just one teletype ya know!

I may just build my own since it is just one module. Just buy the teletype and a power source.

@tehn, could you point me too the power supply you would recommend for teletype?

#11

Another endorsement of the frap.tools cases. Very well crafted and super nice folks.

I know you asked @tehn, but… I’d suggest you look at the 4ms Row 40 if you want to plan for growth.

Have fun!

#12

i haven’t used this c1t1zen usbpower supply, but it looks like the cheapest option out there:

https://c1t1zen.com/presta/home/9-usbpower-kit.html

i read it’s rated for 250ma - should be totally adequate for just a teletype.

#13

@ppqq,
Thanks for the link. I have not an idea on how much expansion will happen so that is another thing to keep in mind.

@shellfritsch,
Thank you too. Very affordable piece and looks like a great place to start for a simple small rig. Perfect!

#14

@shellfritsch @jasper_ryder yup, I use c1t1zen’s usbpower supply for my small euroserge case (3 modules) and it does work quite wonderfully. If only it existed when I was starting out with euro…

1 Like
#15

@AlessandroBonino @shellfritsch,

I’m about to order one of these as I have a teletype getting shipped out soon. I’m curious if one of you guys can explain to me the power consumption ratings. This is taken from the teletype specs: power: 12v: 72ma, -12v: 12ma, 5v: none

Does this mean if the 5v power supply is used there is no ma rating to consider? How do you know when you are getting close to max on the 5v source? Sounds like about 4 modules can be powered with the 5v source?

#16

While the c1t1zen power supply uses a 5v USB connection for it’s power, I believe it then upconverts the voltage to +12v & -12v, but does not provide any power to the 5v bus. This is no problem for you because Teletype draws zero mA on the 5v bus - it’s all on the +12v bus. So with this first module you will be using 72mA of the stated 250mA capacity of the power supply.

2 Likes
#17

Another happy owner of 4ms row power, 4ms modular case, and frap.tools plus skiff here… I haven’t had exposure to much else but I also haven’t a reason to look elsewhere.

2 Likes
#18

That looks like an excellent solution for the Moog cases to expand a Mother.

1 Like
#19

So adding an ansible with these requirements would be a bit to much for the c1t1zen it appears.
power: 12v: 200ma, -12v: 19ma, 5v: none

#20

ansible can draw up to 200ma if it is powering a grid or arc. I imagine less with a usb midi device, but how much less depends on the device. If you are planning to incorporate ansible with a grid or arc I would recommend getting a more capable power supply such as the 4ms row power.

1 Like
#21

Personally putting in my recommendation for the Pulp Logic lunchbox series. I would get the LBZ54, it’s a 5U case with 54hp and power upgrade for a full amp, all for under $300 (regularly has 450mA for $250). I personally have the Lunchbox Traveller which I think is discontinued, but I’m using it alongside a uZeus because the power from the case (only 350mA for this one) simply isn’t enough. So you could easily fill it up with Monome modules, and use the 1U rack(s) for utilities. Pulp Logic offers a ton of great utilities for pretty little money.

2 Likes
#22

+1 for the pulp logic lbz54 with upgraded power supply. i have one. it’s great.

1 Like
#23

I ordered a Synthrotek Deluxe Power module today. So I have power and a teletype in the mail. Now I’m looking for an unpowered case at some point. Maybe move my mother 32 into a case with the power and teletype. Maybe build one myself. My budget is a bit tight.

I would like to get an Ansible so I can actually use my grid plugged into a module (I didn’t realize you don’t ever actually plug the grid into teletype, my mistake but no regrets!:slight_smile:).

@badkidstothefront @shellfritsch
Those cases look really great. There are so many options. I’m trying to not have regrets about what I’ve purchased now as I am finding new information after the fact.