I use those Boredbrain super short patch cables (mostly for self-patching applications) and can vouch for their quality.

About a year ago, I replaced about 90% of my cables with Boredbrain. Perfect mix of flex and sturdiness, and probably the best protection below the barrel of any cable I’ve used.

3 Likes

Control makes ones as short as 4", as does Tendrils. For perma-patching, Tendrils might make great sense, since they can be “flatter”.

3 Likes

Another +1 for Boredbrain.

1 Like

Yeah I have a bunch of the 4” Control cables and find them handy. The small barrels of the Control cables make them my favorite overall.

2 Likes

+1 for the Control cables. They are really useful for certain “permapatch” situations.

1 Like

Polar Noise has 5cm (a cat’s whisker under 2") shielded cables.
Based in Rotterdam, NL, but shipping worldwide.

I’m a big fan of their braided cables, although those only go down to 15cm (6").

Edited to reflect PN’s relocation from UK to the Netherlands

3 Likes

Another +1 for Control. Their shortest cables make my life so much easier.

2 Likes

Anyone has had any experience with ALM patch cables? I’m considering them as I usually buy from Signal Sounds and can have them shipped together with my next module purchase. I was also considering Control BT cables, of which I’ve read mostly good things already, but would end up costing considerably more to have them sent here.

So far I’ve been using Korg SQ-Cable-6 (all 30", all different colors) and a handful of stackcables, but would preferably start using something I could get in different colors and lengths and all stackcables is not an option.

Does anyone else use the Koma attenuator cables? I have one but I feel the response doesn’t have a very wide range. I’m new to this so might be wrong.

I have a handful and find the attenuator slider to be extremely fiddly

I prefer the splix

1 Like

I have some but agree, the slider is way too difficult to dial in. I use the ones I have as fixed attenuators for signals coming out of my eurorack and have actually taped the sliders down at a mid position.

2 Likes

I have a few and agree that they are fiddly. I have a somewhat specific use for them though, so they are more or less set and forget.

1 Like

Noob q:

Is it ok to insert a second cv signal into a stackable at a patch input?

If you mean mixing two outputs into one input on a stackcable, generally no, you shouldn’t do that. For some gear it might be ok (Make Noise says it’s ok to mix gates / triggers with a passive mult) but for most gear I would avoid it. A stackcable is the same electrically as a passive mult, so if you search ‘mixing with passive multiple’ you can find more info.

1 Like

To add on to what DMR said, this is essentially the equivalent of connecting an output to another output and can potentially damage your modules (though most designs include protections against this) and is generally something you do not want to do.

1 Like

Thank you both. I knew not to put an output to an output but was curious if a stackable were more like a mixer in this sense. Good I confirmed it. Thanks.

4 and 6 inch cables from aliexpress: https://bit.ly/3oJaQep
Right angle ones too: https://bit.ly/3mFvxpC

3 Likes

I can’t recommend enough the POLAR NOISE shielded patch cables. They feel great and the build quality is superb. I’ve tried a LOT of brands (CONTROL CAMO, BEFACO, BLACK MARKET, ENDORPHINES, … etc) and they are by far the best.

1 Like

Another vote here for PolarNoise!
Very happy with the braided cables, they also sell Y-splitter cables and very short (5cm/2") cables

1 Like

Got many of these cables from the same Ali store (that also have a different listing with a couple different colors). IMHO it’s the best option for colors and lengths variety, the cables are smooth and nicely built, very much similar to the Black Market ones. I replaced all my Doepfer ones, which I was unhappy with, because all the unfixable kinks.

2 Likes