#12

Awesome! When I come to think about it, it may be that I actually got both CV tool kit AND Silent Way installed on my studio computer. I just apparently haven’t got to know the plugins too well. Thanks for great advice!

#13

If you’ve got/when you get Ableton Live 10, I’ve got a handful of free max for live devices for working with my modular rig. One of them is cv clock output.

You can find link to download all of them on my website: danielrdehaan.com/devices

Enjoy!

4 Likes
#14

Nice @danielrdehaan ! I’ve pre-ordered it and will try out the beta this coming week. I’m pretty sure I’ve been using one of your M4L devices for midi to CV with my Push actually. Super stuff! : - )

1 Like
#15

Been using the Silent Way approach the last couple of days with great success! Saved it into my template. Going to experiment more with the clocked/synced LFOs and stuff too : - )

2 Likes
#16

I’ve got a few small Modular cases which I only get out one at a time (not much space and I like the creative restriction). Some have umidi which seems to work fine, although I always find it really difficult to set ableton’s sync delay just right (any tips?), and I just ordered an sq-1 for the others. I hope it works ok for sending triggers from midi clock/ midi notes, and really hope that it doesn’t have the usb ground noise that I’ve experienced with other solutions. Anyone know if it’s possible/safe to clip ground on usb the way you might with a balanced audio cable or lift the ground on power stuff?

#17

Hi! I’ve been using the trigger in SW to clock my modular, but that one doesn’t have the offset function. Other than that it works really great, but I would like to have it synced in with the projects bpm.
I guess you’re using the sync patch/plugin? I don’t quite get how to use it. It seems like it is sending a rather constant voltage. Any tips on how to set it up?

#18

Check this out. I’ve not used the device itself but the toolkit is available for download and you could simply use it with some sort of amplifier. The device itself seems like a simple clock conditioner. A logic module could probably do the same.

http://www.bastl-instruments.com/instruments/klik/

2 Likes
#19

Yeah I use the sync plugin but I do remember it took some tweaking to get it right. Don’t remember exactly what I had to do to get it to work because it just sits in my template all ready to go now. I can send a screenshot of my settings next time I’m at the computer. Try tweaking the settings while monitoring the clock until it seems right!

#20

Ah yes, I would really appreciate a screenshot of your settings! : - ) Will give it another spin asap, but I couldn’t quite figure it out yesterday. Thanks!

#21

Here ya go!

40%20AM
Screen Shot 2018-02-01 at 7.36.40 AM.png1338×462 72.2 KB

I had trouble with it too. As amazing as Silent Way is, it does take a little time to get used to how it all works.

1 Like
#22

The key thing to point out, and what might have been catching @Plym out is that SW Sync outputs both a clock signal, and run (high when the transport is running). You need to make sure they’re going out on different channels.

1 Like
#23

Ah yes thank you for adding this!

1 Like
#24

Thanks @photofractal - I will give this a spin asap and teppet back! IIRC I did notice the thing with it also running a constant high as @GoneCaving mentions. Should I just split the track with SW into L and R and send one of the channels to a free output?

#25

Giving it a go right now with your exact settings, and while it does get my Grid to play in sync with the track tempo at 8 PPQN and 8 by multiplier the sequences seems to run rather unstable if I try to multiply the division in SW. What’s your experiences with that?

#26

Haven’t played with it much, but seems to work ok. One other thing I did have to do was play around a bit with the Clk High voltage, and reduce it to about 0.6.

Also you can either split the track into two channels, or simply disable the Run output as per the earlier screenshot.

#27

Cool! Will have to experiment with the high voltage settings. Thanks for great advice :slight_smile:

1 Like
#28

I’m currently using the Silent Way Voice Controller to sequence my modular from Ableton but I kind of hate it. I find it to be really annoying to use. Does anyone know of an alternative way to send pitch and gate out of Ableton. I’m using an ES8. I just want something really simple. I almost want to buy a Yarns but I really would rather not get another module.

#29

I own an es8, but i have been using a cvpal to clock my modular to Ableton.
I ceeate a midi track in Live and output it to cvpal

#30

Presuming you have Max for Live, you could maybe try CV Tools.

#31

Ooh I found exactly what I was looking for!

The DRD_Pitch&Gate-CV

Dead simple max for live device and works perfectly. I’m liking this way more than the Silent Way and CV Toolkit ones already.