#124

hi

this is a great question…check the thread below for druid scripts (crow standalone apps that dont require norns/max/something else to function)

#125

Thanks so much! I feel like this cleared up some real confusion on my part.

#126

i guess input[n].mode( ‘change’, …) would allow the same but only for a given voltage precision, though i could add lag in supercollider to make up for any “stepping” you might encounter depending on the rate of change.

actually this isn’t correct, i thought change worked by any voltage change past a given hysteresis, but that doesn’t appear to be the case. fwiw polling does the trick good enough for me right now :stuck_out_tongue:

#128

I’m having a little trouble getting the input scale quantization mode to work. Any ideas?

crow.input[2].mode("scale", {0,2,4,5,7,9,11}, 12, 1.0)
crow.input[2].scale = function(new_note) print(new_note) end

I get this back in maiden:

    ### SCRIPT ERROR: init
/home/we/norns/lua/core/crow.lua:94: attempt to concatenate a table value (local 'a')
stack traceback:
	/home/we/norns/lua/core/norns.lua:136: in metamethod '__concat'
	/home/we/norns/lua/core/crow.lua:94: in field 'mode'
	/home/we/dust/code/shahin-seq/seq12.lua:91: in global 'init'
	/home/we/norns/lua/core/script.lua:105: in function 'core/script.init'
	[C]: in function 'xpcall'
	/home/we/norns/lua/core/norns.lua:137: in field 'try'
	/home/we/norns/lua/core/engine.lua:91: in function </home/we/norns/lua/core/engine.lua:89>
#129

You can’t print ‘new_note’ directly be ause it’s a table. See the crow docs for the contents pf that table, or use the print function in tabutil (i forget the name exactly) to explore via the repl.

1 Like
#130

tab.print(new_note) should do it!

2 Likes
#131

Thanks @Galapagoose and @dan_derks. It doesn’t help when the debug statements add to the confusion. :wink:

If I remove the print statement and have just the line below, I still get the same compile error.

crow.input[2].mode("scale", {0,2,4,5,7,9,11}, 12, 1.0)

#132

Appears to work if I call in druid however.

#133

This sounds like your norns software is not up to date. Which version of norns are you using? If it is the most recent, I’ll have to see if there’s an issue with the norns integration script.

1 Like
#134

Just updated my norns. That did the trick. Thanks!

1 Like
#135

My crow is behaving a bit inconsistently when it comes to connecting to my norns (fates), with a script that makes use of all it’s inputs and outputs.

Usually when I hot plug it to norns I need to restart my norns script for it to behave properly, but for some reason that doesn’t always work. Sometimes I need to unplug crow, plug it again to norns, and restart the script again.

This norns script I’m writing does not include any code regarding hot plugging/connecting to crow, is there any command I can include to make sure crow connects correctly when hot plugging, or alternatively in the init block to ensure the connection happens when restarting the script? Thanks in advance!

#136

Was wondering if somebody could help…!

I have crows and Norns both running the latest version. I never had this problem with previous versions of Norns/Crow.

My crow output is behaving strangely when running awake (norns), clocked by pamelas new workout.

The crow clock on Norns shows the bpm of the Pam, that’s fine. The output 1 is v/oct and output 2 is the gate which triggers a e Envelope generator.

The problem is that sometimes it skips a beat -and makes these random ratchet rhythms. You can see that on the grid the steps are jumped randomly.

Thank you so much in advance​:pray:t2::pray:t2:

#137

Hello,

Would it be possible to write a Norns script that would tell Crow to run the druid script last installed on Crow?

1 Like
#138

Provided you haven’t cleared the script with ^^c or run ^^f, you can simply tell crow init() which will cause crow to re-run the init function of the script currently in memory.

From norns (including maiden REPL) that looks like:

crow.send "init()"

This is untested, but I glanced at the norns code for connection and it should be enough. If for some reason this isn’t working let me know the behaviour and I’ll see what I can do.

1 Like
#139

Thanks @Galapagoose,

Can I send this from Norns without maiden (without my computer)? Sorry for the ignorance.

#140

yes

pretty much any command that could be sent from druid to crow can also be sent from norns w/o computer*

*if your lua script says so…i don’t think there’s a “livecode crow” script yet that mimics druid or some the m4l devices

#141

Great @glia. Thanks. Would it be the:

crow.send “init()”

saved like a little script in the menu basically? The Crow studies covers this idea probably?

1 Like
#142

Will not lie…I need to go thru em again myself! Usually wrangle crow from my computer not norns so I can’t recall off head

Others could probably chime in with details
cc @dan_derks??

1 Like
#143

Gotcha. This evening I will see if I can save:

crow.send “init()”

as a lua script and put it in the code folder and then run it from Norns menu. If that works that would be perfect for what I had in mind.

#144

you’ll need to wrap it in the norns script init, but this should work:

function init()
  crow.send("init()")  
end

let us know how it goes! :slight_smile:

3 Likes