#48

Thanks for the report @okyeron! I’ll clarify the wording, and on this…

…agreed. Will put it on my to-do list to swap these around.

2 Likes
#49

More Dunes madness. Brevity is not my strong point I’m afraid, but if you make it past the 1/2 way point, there’s some nice Make Noise tELHARMONIC that comes in for softcut to work it’s magic on (after I eventually coax it in to tune)

4 Likes
#50

Last night I attempted for the first time to run usb midi into my doepfer dark energy, hoping to use it as a midi>cv converter. I could see the norns recognize the doepfer, but wasn’t getting any gate or v/oct information happening. Any ideas? I’m fairly midi illiterate, and as I said this was my first attempt. Probably a more global norns setting I’m missing but thought I’d ask here since I was working with Dunes. Thanks!

#51

@ideaofnorth - In the param menu, I believe the first option for Dunes is labeled Output and gives you 3 options: audio, audio + midi and midi. See if switching to either of the latter options fixes things!

#52

Yes, I tried both midi and midi+audio but no luck.

#53

Dang - sorry to hear that. Not exactly sure what the case might be. When I was testing midi out I only used a usb-din cable routed to my interface, which worked fine. Perhaps there are some other dark energy users who could clarify?

#54

ddi a quick look at the Dark Energy manual and perhaps you need to set it up using MIDI Learn to be on Channel 1 (assuming Dunes is using channel 1)?

1 Like
#55

Thanks! I did try the midi learn button without any luck. Oddly I’ve run Orca from my laptop into the DE without having to use the learn function, mysterious.

As I’m thinking about it today I’m guessing there’s a specific power-on vs usb connection sequence? I’ll try again tonight.

#56

Problem solved with a hard reset of the dark energy using the learn button on power up, sorry for dragging you into what was a simple issue. I’m super excited to have this functionality now. Messy and out of tune IG post below.

Thanks again for making Dunes! Love that it’s generative and so well documented from within the script.

1 Like
#57

Oh, fantastic! Thanks for the kind words, and for trying it out. Looking forward to hearing more :slight_smile:

#58

Any chance of crow integration for Dunes?

1 Like
#59

Hey Matt! Would you mind explaining how did you get Dunes to sequence the Minilogue? I’m trying the exact same thing but it seems I’m missing something. It works really well with my OP-1, but when I try to hook the Minilogue via USB>DIN cable nothing happens. I’d like to use Dunes for sequencing both instruments at the same time. Cheers!

#60

I’ve been so focused on Compass that I forgot about Dunes! Thanks for the reminder. I won’t likely have much free development time in the coming weeks, but I’d love to prioritize a few small crow-friendly tweaks at some point…

4 Likes
#61

Sure! I’m using an iConnect Midi USB–>DIN, and always make sure to connect both IN and OUT to the Minilogue. It’s doubly fun to then route the audio out of the ML and back into Dunes. I try to always make sure that I’ve got the midi device I want to use mapped to #1 in the SYSTEM menu. If it’s still not working, sometimes it’s helpful to modify the script by changing line 25 to read local midi = midi.connect(1).

But please take that last suggestion with a grain of salt because I am, like, way out of my league once we start diving into code.

2 Likes
#62

Awesome, problem solved! Thanks for leading me to the solution, man. I had MG mapped to # 2 in the midi device menu, so I just changed it to # 1 and it worked. I’ll definitely try routing the audio out back into Dunes! Thanks for the tip!

1 Like
#63

Am digging revisiting Dunes/Compass @Olivier. Here’s Dunes sending midi to modular (Rings/Plaits/Tempi/Ornament & Crime) with the audio coming back into Dunes for some softcut love.

5 Likes
#64

Love this script. What would it take to get the ability to save a sequence? Also, any potential to add clock out?

1 Like
#65

It would be amazing if there was a update at some point after which Dunes could work with Crow!

1 Like
#66

No promises, but I was working towards a save feature. Been sidetracked getting my launchpad mini running as an alt. grid.

I have also changed the UI quite a bit, I’m not sure it’s dunes anymore…

4 Likes
#67

Took much longer than I expected but I have sequence saving working.
Need to figure out sequence loading, but for now I need some sleep. :slight_smile:

2 Likes