Electro-Smith Daisy Microcontroller Platform

slippage · 2022-04-11T21:53:04.054Z

I haven’t seen a good 1:1 comparison of the daisy.init() vs the Noise Engineering Versio. It looks like the big advantage with the Versio is going to be the existing presets created by NE that you flash with their boot loader web interface.

Strictly looking at the hardware, the form factor is identical. The panel designs have the following but I am not even sure if there are limitations to either platform for how assignable the jacks are or if they are just marked like they are for convention and can handle any kind of io (some of the sample patches would lead me to believe this is the case for at least the Init)

------------Init()--Versio
Knobs     4        7
buttons   1        1
cv in     4        7
gate in   2        1
audio in  2        2
cv out    1        0
gate out  2        0
audio out 2        2
sd card   1        0
led       1        4
---------------------------
Price     199      350

To me it looks like the Daisy wins out for anyone who would want run their own code since it’s not like the Versio patches are open source and open to modifying (unless they are and I am not seeing it). Of course for the extra $150 you are getting access to some fantastic, commercial tier audio effect written by the NE team.

OK that’s my brain dump.

sixolet · 2022-04-11T22:54:35.988Z

Nitpicking: I’m pretty sure the fsu jack on the Versio is a gate in?

Also a question: do the versio’s cv ins have enough resolution for v/8ve?

slippage · 2022-04-12T00:03:55.019Z

Ah I see it looks like the last jack maps to the button in the middle, I’ll update the table. Oh and I also had missed a knob for Versio. I can see the advantage of all the knobs making to the CV so points to Versio for that as long as you are ok with the tight space.

DMR · 2022-04-12T03:09:27.341Z

Does the Versio module have an SD card slot? I don’t have the module but don’t seem to see one on the front panel.

naiveteenidol · 2022-04-12T16:25:40.800Z

It does not. It just has a micro-USB port on the Daisy

whisper3000 · 2023-08-23T14:50:21.539Z

Things look a little quiet over here. I’m interested to know what people are doing with their Daisies these days.

toneburst · 2023-08-23T20:03:02.009Z

Just ordered a Daisy Patch Submodule. No special plans for it right now, but I’m sure I’ll think of some use for it…

Anyone using a colour screen and SD card with theirs?

sanderson · 2023-08-24T12:42:36.236Z

I just got my Patch so I have a couple of things to work on:

Editing and building via Xcode, have this working including upload but feedback to Xcode is limited and no debugging yet.
Building some patches to test, I have a quad vc attenuator as a test harness, just trying a few other things now.
Porting an Arduino based midi version of Jon Simontons Pink Tunes. Have this working on Arduino, just need to port and consider what is UI and what is midi cc controlled. For those who don’t know it’s from early PAIA times and generates notes based on predefined tables. In my case scales, four voices and gate driven. I have it running on an Entrospec IUNGO.

I’ll chuck all this up on GitHub at some point but I literally just got the module yesterday so still messing around.

Cheers
S.

Helen · 2023-08-24T12:46:39.723Z

I didn’t even know about Daisy until I came to upgrade the firmware on my Endless Processor module!

And that upgrade is all I’ve done, but it was worth doing!

hermbot · 2023-08-24T13:33:45.031Z

I’ve been kicking around some spreadsheets to plan out the I/O for a few projects using the Submodule. It would be really nice if there were some more CV inputs, at least for some of the things I have in mind (which makes me wonder if this is the correct platform to be attempting such things - it’s obviously more of an audio-targeted platform). To do some of the things I’d like to I would need to look into some kind of multiplexer and that’s already beyond my feeble mind.

Here’s what I’ve been using to plan pinouts, I just populate the left columns and strike out each pin as it’s used up.

docs.google.com

Daisy Pinouts Template

SM Parameter,Pin,Name,Type Decay,C5,CV_1,Potentiometer,A1,-12V In,C1,CV_OUT_2 A2,ADC_9,C2,CV_4 A3,ADC_10,C3,CV_3 A4,GND,C4,CV_2 A5,12V In,C5,CV_1 A6,5V Out,C6,CV_5 A7,GND,C7,CV_6 A8,USB_DM,C8,CV_7 A9,USB_DP,C9,CV_8 A10,3V3...

robint · 2023-08-24T16:39:25.821Z

I have a patch.init() module and I discovered this video because of it:

There are some great patchers out there, although it is hard to decide which parameters to map to the module controls. I’m not entirely sure that all patchers will work though.

I´m also working through this course to learn Max in parallel and so far I really like it:

kadenze.com

Max MSP Programming Course: Structuring Interactive Software for Digital Arts...

Max programming, like most interesting topics, has deep aspects and shallow aspects. This course will largely focus on the deep aspects: principles, concepts, techniques, and theory. If you understand these underlying aspects, your capacity to create...

whisper3000 · 2023-08-24T20:42:43.054Z

OK. I’m convinced. I just ordered a patch.Init()

schnickerbocker · 2023-08-24T21:07:48.651Z

I made a Mangrove style dual formant oscillator using the Daisy Seed as a starting point.

IMG_17341920×1440 454 KB

cedarcedar · 2023-11-02T18:32:47.074Z

That’s a beautiful panel! Would you be willing to share the Gerbers anything? I have one that’s blank but the crisp simplicity of yours stands out!

m9dfukc · 2023-11-02T18:42:07.042Z

Very cool. Mangrove is my favorite oscillator so this is very interesting to me. Would you mind to share more details about your project?

schnickerbocker · 2023-11-06T16:04:56.966Z

It’s basically a dual Mangrove. The buttons along the top allow for octave up/down. There’s a main pitch knob as well as a ±1 octave control for the second oscillator.

Each channel can be individually set to constant wave, constant formant or square wave. There are controls for the peak duration and angle as well as volume (with clipping) and FM.

I don’t have a Mangrove to compare with, but it was enough to address my GAS for one while learning a couple things in the process.

m9dfukc · 2023-11-06T19:58:51.033Z

Sounds interesting. Do you have any sound examples?

schnickerbocker · 2023-11-06T20:28:27.672Z

Not handy but I’ll record some and post them here shortly.

FLSR · 2023-12-19T18:47:45.636Z

wanna hear that. do u use c++ for programming daisy?

ljudvagg · 2024-01-27T20:20:50.090Z

I built a thing with Synthux simple touch and daisy. It’s some kind of arpeggiator with a basic fm synth. I’ve been putting off learning c++ for some reason but after finding Synthux academys contest I just knew that this was the perfect opportunity to push myself and learn something new.

Synthux kit is a perfect start for someone like me who enjoys hardware but rather spend time in the comfortable software world. Buying the st-link v3 probe was also a game changer as it’s more than twice as fast as flashing with the built-in usb.

I’ve shared the code with some documentation on github

GitHub

GitHub - filipforsstrom/chord-buffer: Chord arppegio with a basic FM synth...

Chord arppegio with a basic FM synth inspired by analog shift register - GitHub - filipforsstrom/chord-buffer: Chord arppegio with a basic FM synth inspired by analog shift register