#143

The new 1.6 update is ready to download!

9 Likes
#144

A fix for multisample algorithm (cracking sound) is a lot awaited and will be welcome. I hope it will fixed soon :blush:

1 Like
#145

trying the new poly wavetable algo with teletype - you can use the existing disting note ops with it (haven’t tried ansible but it should also work using the existing disting modes). neat to have 8 wavetable voices.

2nd disting is running augustus loop delay, the teletype knob is controlling decay on disting #1 and feedback on disting #2 via i2c.

https://www.instagram.com/p/CI4rtilBHAq/

6 Likes
#146

It sounds great!
Which Teletype sequencer is this?

#147

Wins award for most elegant understatement of the day :slight_smile:

Seriously, thank you for helping make this possible! Teletype and Disting Ex are such a beautiful combo, it’s like they were designed for each other.

3 Likes
#148

it’s a modified version of rain scene, you can find it here.

definitely, with the amount of available parameters for each algorithm you want something like teletype to control them efficiently. i’ve been thinking about creating a dedicated multipass firmware but too many projects!

2 Likes
#149

I don’t know if this has been talked about before, but I’d been struggling with nasty pitch shifting glitches and crackles when using CV/Gate triggers from ansible and teletype to the multisample mode in disting (e.g. when playing the soft piano). I believe these disappear when doing it by i2c, but sometimes it’s nice to just be able to patch a cable :slight_smile:

The solution is to increase the gate offset parameter in the multisample mode (parameter number 49). It defaults to 0, but you can increase it. This delays the sampling of the CV after it receives a gate, so that the CV has fully settled on its new value. I’m not exactly sure what the units are for this, but I’ve found that somewhere around 200 worked for me for teletype.

Hope this helps someone out there!

3 Likes
#150

I read on Muffwiggler that you can solve similar problems by using a faster SD card.

#151

I thought that too and, while using a faster card is not going to hurt anything, my crackles have persisted.

#152

The Gate Offset should always be applied when controlling it via CV/gate.

It’s in units of sample frames, by the way.

4 Likes
#153

Oh, that’s a relief… was thinking “it can’t possibly be milliseconds can it?!” :slight_smile: The gate offset solved all my crackling problems completely for sure.

#154

Just purchased one of these strictly for the multisampling capabilities.

The piano demos sold me and it reminds me of my asr-10 which crapped out on me :confused:

I’m wondering how the string samples sound?

I heard of someone imported mellotron samples should it be pretty easy to import other sort of romper samples?

I love a lot of the old stock sounds from some of the older rack synths, the ensoniq and emu stuff.

#155

About the sample algorithms audio issues: after quite some struggle with different SD cards, gate offset parameters, fw updates etc., I still haven’t found a situation where SD 6 Triggers and Multisample properly play samples without any issue for a long period of time. Sometimes I would think I’m getting somewhere stable and sure enough, after 30/45 mn, something happens, whether it’s a temporary dropout or something that completely freezes the module. The best I could get is to mitigate the issue with a Sandisk Ultra card, by strictly sticking to 16bit mono 44.1 Khz and stay within a 1 octave pitch range for sample playback. The module is amazing, but with the many issues, it has a bit of a Cyberpunk 2077 effect on me: I can see that it looks great, but I still haven’t been able to really experience it as it’s meant to be experienced. After a lot of reading, I’m starting to wonder if some people have managed to use these algos without any problem at all? I still can’t figure out if it’s just my unit or if it’s just the way the Disting EX is. I ordered a couple of different SD cards but I’ve tried 3 already and I’m starting to lose hope a little… Any positive experience or specific advice from those who managed to solve the issue long term?

#156

I have no specific advice I’m afraid, but can confirm that with a Samsung evo SD card my Disting EX works reliably on multisample mode. I have also put together a custom sample set. This took me a while and I had frequent drop out and crackle issues when the sample set was too big (too many velocity sets, etc). I managed to get it working by reducing the sample set size.

Do you have issues with different sample sets? Are some more reliable than others?

#157

Interesting. Yes, some samples seem more prone to issue than others, even if everything is mono 44.1 Khz 16 bit, I’m not too sure why. I still can’t really find a pattern (other than more than 44.1 Khz is a big no no on all my cards (as in big dropouts fest)). The issue is relatively rare on stock sample banks, but they aren’t any different than my own in terms of format or length, so I’m not too sure what’s going on. I will try this card, maybe it will improve things. Thanks!

#158

are the cards that you are trying formatted FAT32 and partitioned ‘Master Boot Record’? Also the cards that work best support High Speed Mode.

I’m using the stock Samsung Evo card and the multisample algorithm works great, no dropouts or crackles. I had another Samsug EVO Plus card laying around, not the same as the stock card, so I formatted that and transferred samples to it and tested it out and got all kinds of dropouts. So using right card seems to be key.

#159

They’re all formatted this way indeed. I’m definitely going to try this Samsung card, thanks for the tip!

#160

On page 10 and 11 of the user manual there are hints and tests for the SD cards. Have you done the Disting EX - SD card speed test? You can find it in the “misc” menu.

1 Like
#161

The Kingston Canvas Select Plus card has also been recommended. https://www.amazon.com/Kingston-32GB-microSDHC-Class10-SDCS2/dp/B07YGZ7FY7

#162

I just got the Kingston Canvas Select Plus that I linked to earlier, formatted it put the samples back on it then tested it and I get crackles. So far the only card that works for me without any problems is the Samsung card that came with the distingEX.