#74

Does the ex follow the same order of the Txb?
Ex goes GND - SCL -SDA
Txb goes GND (Tip of stereo jack) - ? ?

#75

check this thread (scroll down to “what is TXb” section): A user's guide to i2c

1 Like
#76

Got it, yes its the same order, thanks @scanner_darkly !

#77

oh and for the ex itself it does use the same order as teletype.

1 Like
#78

Time to RTFM :slight_smile:

image
image4032×3024 3.2 MB

8 Likes
#79

thread for teletype / disting ex integration with the beta firmwares: Teletype Disting EX integration

4 Likes
#80

i’ve posted the complete i2c specification here if any of the crow developers want to add disting ex support!

2 Likes
#81

What’s a Gener-8? 20 characters.

1 Like
#82

I’m really glad to note that the Disting EX illuminated jack sockets (at least on my particular unit) are pleasantly firm (unlike, sadly, those on any of my other Expert Sleepers modules).

#83

i replaced my four mk4 Distings with two EX modules and immediately noticed the bad digital noise floor of my modular disappeared!

now to sell these four extra modules!

1 Like
#84

Its a module i made based on the most simple circuit by doepfer;
I use it to send reset signals to clocks, trigger teletype scenes…
Ill post it on my github assap, its based on this schematic:

image
image2732×631 202 KB

4 Likes
#85

It’s quite fun to see what new creature the EX morphs into as the algorithms come. This new single mode algorithm looks like a pretty full featured, configurable, and compact euro looper (actually 4 independent loopers). Quantized or unquantized recording, route the 4 ins and the 4 outs independently to set up a stereo mix, overdub, reverse, crossfade, etc. Seems a bit fiddly compared to a dedicated looper if using the onboard controls. But considering that everything can be mapped with MIDI opens things up - breaking the controls out across a small MIDI controller would be great in terms of interaction.

7 Likes
#86

I’ve had my superdisting for a few weeks know and I’m enjoying it immensely. I’ve been gifted a midi to select bus breakout add on, has anyone here tried it out? I’ve already got a midi to cv converter in my case so would there be any advantage in adding it to my set up if I don’t already have modules that use the select bus cv and gate protocol?

#87

new 1.3 version has been posted which includes the teletype integration: https://www.expert-sleepers.co.uk/distingEXfirmwareupdates.html

8 Likes
#88

Multi-Sample SD algorithm works great now with the 1.3 firmware. Controlling the EX with a Nerdseq midi track is so fun. Really liking this module.

4 Likes
#89

I was also having trouble with it. Was trying to play with Polyearthsea with 1.0 and most of the notes were missing. Did the update today and it works as expected!

1 Like
#90

planning to add the ability to control it directly from polyES soon.

1 Like
#91

Seems like a definite nice to have! :slight_smile:

#92

it’ll give you 8 voices, among other things (and velocity as a mod destination)

1 Like
#93

Still waiting for mine to arrive.