#2119

19 posts were merged into an existing topic: Critter&Guitari video synth Eyesy for Fates

Critter&Guitari video synth Eyesy for Fates (updated)
#2125

so my assembled Fates arrived in the mail today. Im lazy and horrible at soldering so i had a friend put it together for me. Where can i find resources for getting a case printed? I have access to a printer - just need files/plans for the case.

#2126

Search in this thread/topic for “3D print”

1 Like
#2127

i guess i could have just done that. ug. sorry/thanks

#2138

image
image3264×2448 1.46 MB

Best I got so far , but I can’t control anything
When running on fates screen , this is all I’m getting

image
image3264×2448 1.4 MB
image
image3264×2448 1.54 MB

1 Like
#2142

does anyone know why my “Select” menu would look like this all of a sudden?

1
12048×1536 127 KB
2
22048×1536 293 KB

#2144

Its the favorite function. Scroll with encoder 3 to favorite things. The things that are your favorites will be on the top of the list

2 Likes
#2145

oooh whoops. haven’t been keeping up like i should. thank you both

#2147

I’ve woken up this morning to a supercollider fail a and I have no idea why?

I updated some scripts yesterday via maiden…but it seemed to work ok…

So a little further testing and I can play op1 into fates fine, I can play back some recordings I made yesterday but nothing is showing in the meters at all…and obviously no scripts will load…weird

Tried all the normal things like resets ect - no dice

#2148

if you updated from maiden and did not restart, it’s possible one of those updates contains an engine or something that is causing the error.

Check maiden - use restart; from the REPL to see if you get any errors about duplicate engines, etc.

Otherwise - what scripts did you update?

What software version are you running?

completely unknown to me.

#2149

Thank you - I went into maiden and tried a restart and it says (under sc) library has not been compiled successfully

Latest version and I did a group update so I can’t remember :slight_smile:

#2150

Thought about that with a pi board. Buts it’s pretty tricky. So it’s best to stick with a hat unless it’s something you really want to invest a lot of hours into

#2151

There’s composite video out built into the pi on the 3.5mm jack. It’s a TRRS jack and instead of the 2nd ring being a mono mic in it’s a composite video out. I have no idea what you’d need to do in terms of overlays/if you’re trying to get Fates’ display on another screen but there is a composite out built in. You could try this but I don’t think the config.txt is still running the show on Fates/Norns.

3 Likes
#2152

for assistance, share the rest of that error message.

1 Like
#2153

I would but that was all it said

#2154
  1. open maiden

sc-1
sc-1975×967 42.3 KB

  1. go to SC tab and enter ;restart (do not forget the semicolon)

sc-2
sc-2969×955 40 KB

  1. copy entire output
    sc-3
    sc-31048×969 106 KB

“library not compiled successfully” is the error message when sclang tries to evaluate something but there is an error in the classes.

sc-4
sc-41039×952 107 KB

it is verylikely there is a duplicate engine, but this could also mean a missing file from someone’s project or many ther things. so we need to see the full error message from sclang’s class compilation step, which is shown immediately after ;restart. (but will probably not be shown on initial connection of maiden, since sclang’s startup process has already ended in failure.)

1 Like
#2155

I was just sending a screen shot

image
image2448×3264 1.64 MB

#2156

you are missing the intiial semicolon in ;restart.

therefore maiden is not recognizing the command and is passing the string “restart” as code input to sclang, which is in a failure state.

#2157

and thats much “better”
compiling class library…
Found 716 primitives.
Compiling directory ‘/usr/share/SuperCollider/SCClassLibrary’
Compiling directory ‘/usr/share/SuperCollider/Extensions’
Compiling directory ‘/home/we/.local/share/SuperCollider/Extensions’
Compiling directory ‘/home/we/norns/sc/core’
Compiling directory ‘/home/we/norns/sc/engines’
Compiling directory ‘/home/we/norns/sc/ugens’
Compiling directory ‘/home/we/dust’
Open ended comment started on line 142 of file ‘/home/we/dust/code/lissadron/lib/Engine_Lissadron.sc’
ERROR: Variable ‘root’ not defined.
in file ‘/home/we/dust/code/grd/engine_grd.sc’
line 11 char 12:
root = 50;

	group  = ParGroup.tail(context.xg);

ERROR: Variable ‘root’ not defined.
in file ‘/home/we/dust/code/grd/engine_grd.sc’
line 42 char 18:
([0,12,24]+root).do { |base,i|

			key = d2k.((m[i*8+1]*8).asInt, mode);

ERROR: Variable ‘root’ not defined.
in file ‘/home/we/dust/code/grd/engine_grd.sc’
line 59 char 3:
});

}
Grd v2.0 more parameters + extended param ranges
#2158

take it up with the author of grd. other user reports same error:

in the meantime, try uninstalling that script to continue using norns.

1 Like