#107

I seem to be having trouble recording to the buffer in M4L. I can still get the previous version of grainfields to work just fine in M4L.

I’m pretty sure I’ve ruled out user error at this point. I set up the tracks in Ableton according to the instructions (and as I’ve done with the 1.0 version). The i/o for each voice is set up just as I have it in the previous version as well. Everything lights up, and all other functions work. When I press the record into buffer buttons (far right column), it lights up for the set recording duration, the light goes off after said duration, but nothing has appeared in the buffer.

Any advice?

#108

Hi Travis,

Thanks for the heads up. I did a lot of optimization in the device, and suddenly I have the same issue here. I’ll fix it and put up an update asap.

#109

Awesome. Thank you, Kasper!

#110

No rush on this stuff, but did you happen to upload an update and I’m not seeing it? If not, all good! Just curious.

1 Like
#111

Just committed a fix for the audio input recorder. Should work now. You can grab the update on Github. :slight_smile:

Let me know if you experience any issues.

2 Likes
#112

Just posted an update. :point_up_2:

1 Like
#113

Hey! You rule! I’ll give it a shot hopefully tomorrow!

#114

Awesome! Thanks a ton! I’m looking forward to getting it up and running this weekend.

#115

Not sure when this started happing, but is anyone else having trouble with Voice 2? Whether I drop a sample into it or record the live input, I’m getting some hardcore crackling. This isn’t happening with any other voice.

MAJOR CLARIFYING EDIT:
I’m talking about the 1.1 M4L version.

#116

Did anyone ever add midi mapping to the standalone version? @kasperskov @rdfm @disquiet

#117

Not me. Maybe someone else?

1 Like
#118

Has anyone made a touch osc mapping m4l version? @kasperskov

#119

Just found the issue with voice 2. The default preset was setting the grain duration to the minimum which will create some crackling. I committed a fix for this (still version 1.1 on Github).

1 Like
#120

Right on! Thanks a ton.

#121

a v. cool granulator that @kin.sventa just hipped me to as i was so into the glut script for norns … …
will someone mind telling me the pitch interval for 7th harmonics +/- ?
*would b imho more intuitive if the pitch intervals were in semitones : )
gratitude ! ! !

2 Likes
#122

9.6882590646913 semitones plus 2 octaves

1 Like
#123

oh snap ~ ezra the king to the decible point … … :sweat_smile:

1 Like
#124

sorry should have included the formula:

  • start with freq ratio = 7
  • divide by 2 until within one octave = 7/4
  • semitones = log2(ratio) * 12 = log2(7/4) * 12 = 9.688…

(or equivalently, log2(7) * 12 - 24)

1 Like
#125

Hi, this is my first time using the grid and this is the first patch I’m working with on MAX. This is a stupid question but audio out? Grid is plugged into iMac and I my interface is Apollo Twin X. I can’t get any audio and have looked at preferences, sound, etc. Any ideas? Again novice so don’t beat me up too bad.

#126

hey hey!

are you able to get sound using the default iMac output? here’s my audio settings on a MacBook Air:

Screen Shot 2020-04-10 at 10.17.27 AM
Screen Shot 2020-04-10 at 10.17.27 AM2336×1480 652 KB

and then the far left key in a row needs to be toggled on to enable the grain voice – so, try toggling that on and selecting a grain in the middle of the first row. do you get output?