Greyhole

coreyr · 2019-12-17T03:07:37.322Z

This is a great reverb port. Really enjoying the LFOs.

Is there a way to feed it from tape? I’ve been running a sort of feedback loop with tape turned up fairly high sent out the output and then back in to norns with the channels swapped (L out to R in, R to L) and riding the engine levels to keep feedback from running away on me. Is there a reason I couldn’t do this via code instead of patch cables?

zebra · 2019-12-17T03:23:35.846Z

Not possible without modifications to crone audio process. That is straightforward but kinda involved. Also there would be performance impact, without additional architecture - all mixing routes in crone are always active and we have added many in response to similar requests.

(Here is the current routing. Would imply adding tape_eng.)

Much simpler alternative method might be adding soundfile playback directly to the engine with a few li es of sulercollider. See DiskIn helpfile.

Olivier · 2019-12-17T15:33:20.885Z

Love it, even though I only had 5 mins to explore last night. Here’s a single Cocoquantus channel going through Greyhole w/ fixed params:

Prnts · 2019-12-18T05:57:36.711Z

Oddly enough when I load greyhole I just get a black screen. I am on the most up to date norns

okyeron · 2019-12-18T06:59:36.375Z

Did you restart (SYSTEM>RESET) after installing it?

SPIKE · 2019-12-18T08:06:22.948Z

running MANGL through this now…
amazing.

Prnts · 2019-12-18T08:52:39.890Z

I did system restart and the same thing happened.

**edit
Just took a look at the greyhole Lua file that downloaded and its empty. So strange. Going to try to download it again.

Justmat · 2019-12-18T12:31:36.119Z

Prnts:

Just took a look at the greyhole Lua file that downloaded and its empty

That is super strange… Did you install from Maiden?

Prnts · 2019-12-18T18:10:34.222Z

I got it from this forum post. I got it fixed. I think possibly something happened when I was copying it over on forklift. Got it working now

tehn · 2019-12-18T18:11:43.762Z

i would highly suggest not using FTP— maiden’s manager allows updates from within the interface

Prnts · 2019-12-18T18:27:52.990Z

Yeah the main reason I did it that way was because Greyhole was not showing up as an option for install through maiden for whatever reason. I have been happily using maiden for Norns management

Justmat · 2019-12-18T19:29:05.236Z

It’s showing up for me, did you refresh the list?

ngwese · 2019-12-19T03:27:36.109Z

Prnts:

Greyhole was not showing up as an option for install through maiden for whatever reason.

Currently one has to manually refresh to see changes. It has caught a few folks by surprise. I’m tempted to at least add code to refresh the catalog each time norns is booted.

UPDATE: I’ve created a ticket:

github.com/monome/maiden

maiden should update catalog on boot

opened 06:54AM - 19 Dec 19 UTC

closed 06:38PM - 08 Mar 20 UTC

ngwese

several people have resorted to manual script/project downloads because maiden p…roject catalogs are not updated automatically - additions made on github are not seen because a manual refresh is required. it seems advisable at a minimum to refresh the catalogs if/when network connectivity is established on boot. doing this would keep the catalogs reasonably up to date without manual intervention while avoiding periodic updates which could in the extreme cause glitches during recording or performance (however unlikely that would be)

Tyler · 2019-12-23T03:29:08.413Z

I’ve been having a lot of fun with Greyhole. I attempted to make the LFOs a little less distracting by formatting the floating point strings so that they would keep a consistent width.

Here’s my fork on github for anyone wanting to check it out:

github.com

tlubke/greyhole/blob/master/greyhole.lua

--     greyhole
-- but for
--     norns
--
-- ----------
--
-- key1 = alt
-- enc1 = time
-- enc2 = size
-- enc3 = damp
-- alt + enc2 = diff
-- alt + enc3 = feedback
--
-- https://llllllll.co/t/27687
-- @justmat

engine.name = "Greyhole"

local alt = false

This file has been truncated. show original

@Justmat if this is useful, I can make a pull request.

Justmat · 2019-12-23T12:38:08.952Z

Good idea! I will check it out later this morning.

edit: @Tyler, it does look better this way. I think it can be done a little simpler using string.format, I’ll push an update in a few minutes. Thanks for bringing this to mind!f

edit, the second: update pushed

Tyler · 2019-12-23T15:50:30.172Z

@Justmat Oh yeah, string.format is much simpler after all. I guess it was still a good exercise.

AlessandroBonino · 2019-12-26T16:34:24.400Z

@Justmat this is something that I was really missing from norns! Thank you! I’ve just tried it and THANKS FOR DOING THIS!

Justmat · 2019-12-26T16:36:03.788Z

i am glad you are enjoying it!

abozzelli · 2019-12-28T17:40:13.009Z

@Justmat since the last commit only ENC1 is working.

Justmat · 2019-12-28T17:45:50.474Z

Bug squashed

@abozzelli, thanks for the report! should be good to go now.