#81

But those are all powered, this one is passive. I could be mistaken, but I didn’t think it was possible to DC couple passive?

Edit: I happily stand corrected.

1 Like
#82

Good point.

Ctrl-Fing the manual for DC doesn’t bring anything up, and it only calls out the following:

“Any audio signal patched into here will be
gated by the voltage arriving at the CV IN [3]
jack, and sent to the LPG OUT [2] jack.”

1 Like
#83

Yes, it is DC coupled. The manual and web page will be updated to clarify.

8 Likes
#84

Any other Morgasmatron owners out there? I’d be interested in hearing about some of your favorite ways to use it. I feel like this is one of those modules that I haven’t tapped it’s full potential yet.

1 Like
#85

If you’re looking for a little more intellijel history and insight. :slight_smile:

11 Likes
#86

Question on the intellijel 1U stereo in and out modules. My plan is to get both the stereo in and out modules, but I have two use cases in mind. One is the standard, use the outs as stereo out and the ins as a way to get mono or stereo signals in. My question is around the second, though. I want to use those two modules basically as a send/return for my zoia. Is it possible use one output to send a mono signal to a pedal, and one or both inputs to return the processed signal? I can control the dry/wet elsewhere, and then use the remaining output to output a mono signal? Is there bleed between the two stereo outputs/inputs, or can I use two distinct signals? Would there be any reason I’d need the specific pedal send (besides the dry wet control)?

#87

You can definitely use them that way. The pedal send is for people who don’t need or want the dedicated in/out functionality. Also it can be used on the input jacks of a 7U case. So then if you are using the stereo out module for the L and R out jacks you can add a pedal IO and use the L and R in as the send and return. Many people told us they have no need for dedicated inputs and so this provides an alternative use for those jacks.

2 Likes
#88

Awesome! Yup, I’m using them with the ins and outs on the 7U case (which I love btw :D). I was thinking that the stereo in and stereo out module would give me the most flexibility. I guess another alternative use would be to have the stereo out and the pedal io, and I can use the pedal io as just a mono in if I turn the knob all the way wet, right?

#89

if you don’t need dedicated level controls, it looks like they just came out with a tiny passive 2x 1/8" module to access those jacks, which would leave you the maximum flexibility for minimum 1U space.

1 Like
#90

Anyone know if it would be possible to power a CV.OCD via the USB Power 1U and a Ripcord USB to 9V DC power cable (which is advertised as a compatible PSU for the CV.OCD on Reverb)?

#91

yep definitely possible, I use the 1U usb / ripcord to power pedals all the time

1 Like
#92

Awesome! Thanks for the reply!

#93

Can definitely do this, I do it all the time.

1 Like