#7

might want to download the latest firmware for your keystep, as this has been an issue in the past: https://github.com/monome/norns/issues/609

4 Likes
#8

20 characters worth of amazing thank you!

3 Likes
#9

Updated to v1.2.1

Features

  • Configure MIDI device/channel in params
  • K2 + K3 = all notes off
  • JF god mode param

Fixes

  • Better v/oct pitch tracking

Misc

  • UI/param cleanup
8 Likes
#10

First off – this looks awesome! Can’t wait to try it out

Couple of ideas: Gate into 1 for sustain input and trigger into 2 for “all notes off”/panic ?

1 Like
#11

I like it. I could definitely see using an input to gate/retrigger the current/most recent voices.

I tried input 1 streaming to crow.ii.jf.transpose(volts) this morning and that worked really well for adding a bit of lo-fi pitch modulation.

2 Likes
#12

What about adding support for the upcoming W/ synth functionality? :thinking::pray:

5 Likes
#13

Absolutely! I plan to add some basic support as soon as I get my W/s updated to the new firmware.

8 Likes
#14

Here’s an experimental branch that adds support for wsyn: download zip

Almost all of the wsyn parameters can be changed from the params menu. I’ll probably hold off on adding anything into the master branch until things have stabilized.

Enjoy!

Edit: updated with a fix for releasing notes in ASR mode. Now you can toggle between AR and ASR envelopes!

8 Likes
Mannequins W/ (with)
W/2 norns apps
#15

Wonderful work! Not tried but reading it.
Would it be a lot of hassle to add Grid (also 64) support?

1 Like
#16

It shouldn’t be too difficult to get something basic working. Maybe a guitar-style layout with rows of semitones separated by 4ths?

4 Likes
#17

Wich pretty much resembles earthsea (ash) (i think) without polly and would offer poly pattern rec at the same time. Still the best for free handed gridding

#18

voltage range in the Params referes to per voice voltage so this is the setting to limit the volume of single voices and could help in reducing clipping the Mix Out?

#20

I think the Param you’re referencing controls the range of the crow CV outputs. I’ve been thinking I need to add something to scale the voice levels to prevent clipping, if desired.

#21

If that isnt the same, its over my head, i am still in planing mode, no crows yet and trying to understand whats covered.

#22

Just pushed a small update that adds grid support and allows scaling the level of each voice.

6 Likes
#23

wow, thank you for this!
Have you any picture of Grid pattern description? Would be soooper helpful for me :slight_smile:

#24

The grid pattern is 8 rows of semitones with a 4th between each row:

just-play-grid-2x
just-play-grid-2x1428×1084 24 KB

3 Likes
#25

That’s it! Thank you again

1 Like
#26

just figured things out with the new grid control, so cool. I thought it wasn’t working, but then I realized that the velocity was actually a little low to register led changes on from my jf (looks like it was sending out 1.67 v)…I changed the velocity scale from .33 to 1.0 v in the param menu which outputs 5v for the notes and lights fine.

1 Like
#27

Ah, I set the velocity scale so that it wouldn’t clip when I played via MIDI. I probably should’ve set the default grid velocity higher.