Of course! I love when people share patch notes.
The basic voice is: Batumi > Frames as described above > Tallin set to asymmetric drive > Sisters All input.
Miasma (which is essentially Befaco’s Rampage module with some extra features) has both sides looping at different rates. The various outs are opening the VCA on the voice, creating the melody, sweeping two channels of Batumi through division rates, sweeping through Frames to fade in and out channels of Batumi, and clocking a couple sequential switches.
The melody is another output of Miasma running through a sample and hold, then a quantizer (set to C, D#, F, G# but I don’t know the root pitch of what’s running into it so those might not be the actual notes you’re hearing). The S&H is actually clocked from the lowest pitched channel of Batumi. Its square out gets divided by 7 and then again by 64, so the melody does actually end up looping, but over a very long time, with shorter phrase loops developing in between.
The delay is a Reflex Liveloop with a Steiner-Parker filter in the feedback loop. Then I’m also sending one of the channels of Batumi that is having its divisions modulated into an FM Aid and into the bandpass of the S-P filter, so it gets introduced into the soundstream after one delay cycle. The other modulated channel of Batumi is sent to a comparator to create a really thin pulse wave and is going into the highpass of the S-P. Since those two channels bypass the VCA and are getting shifted around, they create nice variations on the main melody.
The output of the S-P is multed, and the big jump in volume that happens towards the end where the feedback goes wild is when I plugged that into the highpass of Sisters.
The All output of Sisters is going to the center channel of a Nearness mixer, while high output is running through a switch and getting sent around to Nearness’ other inputs so it jumps around the stereo field. The stereo outs run into the delay.
The other sequential switch is just sending one of Batumi’s channels to various spots around the patch to add subtle modulation.
On the performance side of things, I was mostly just attenuating the modulation on frames to make the sound brighter or darker, raising the gain on the BP and HP inputs of the S-P filter, changing the frequency and span of Sisters, and the frequency of the other filter.
