Tempest midi out goes to an Intellijel uMidi module.
Clock and Reset show up there and gets distributed around the system (including to Ansible, of course).
In addition, I have pad B2 on the Tempest set to send it’s midi sequence data to the midi out as well. That note info shows up on the Pitch and Gate jacks of the uMidi, and is routed to a ‘voice’ in the eurorack. (If you try this, make sure the volume for that pad is more than 0. Even though though pad isn’t generating any sound within the Tempest, if the volume is zero, it will MUTE the pad.)
BTW, the new Cued pattern change of Kria was a godsend for this setup, to keep patterns starting at the same time. Really clever implementation by @tehn !
Good luck!