#48

yes you are right. o_O
Sorry.

I will have a go with it and share what I have found in the next days

:smile:

#49

@bassik,
I haven’t noticed anything strange using the m4l version I edited. I am not completely clear on what it is you are having a problem with either though.

Are you changing the BPM and then having the issue? Or is it just when you bounce around tracks no matter what?

Please keep posting on your progress!

#50

@jasper_ryder this row does tempo division, it is always on a certain division when you use the patch.
With autofocus on, try to change tempo division and then go to another track that haev auftofocus on.
I have for example flin from monome terms on the adjacent track.

When I switch to terms, renome returns to the tempo division the patch was in when initialised.

maybe you do not notice it because you have never changed tempo division?

peace

#51

Ok now I understand what you’re getting at! I will try it out and see.

#52

@bassik,
Yes sir, you are correct. This is happening.

#53

@chapelierfou @jasper_ryder

I think I have managed to correct it!!!
Have a try please and let me know :smile:

It was in the satellite patching, there was an “r init” that was always banging a number 4 from the list of the tempo division.

Now we still have two bugs in my view:

  1. the note range do not refresh when moving out of the track
  2. when using monome terms flin with renome, the columns that are used in flin are dimmed down

Now it is too late to look at them but I am happy I have (maybe) resolved the tempo issue.

RenéMonomeSat 0.12.amxd (787.0 KB)

#54

@bassik @chapelierfou,
Something is not good on my machine I think. When I load your new edited version bassik I get this:….no rene dials and no notes.

I can only use the original version from chapelierfou. As you can see it loads fine and works, but as soon as I try to edit it, the dials disappear, and I have to delete and reload the original. I am frustrated. I think something gut mucked up between max and ableton. :worried:

Edit: tried deleting everything and reloading: getting this still from @bassiks

Screen Shot 2016-01-06 at 9.13.19 PM.png962×756 104 KB

#55

Same mistake as i did first : @bassik, you need to freeze the device before uploading.

#56

@chapelierfou
Just checked my laptop and it has the same problem as @jasper_ryder.
I reckon that as soon as I unfreeze the device and modify it and then freeze it again and save (did it everytime I was modifying) it lose the bpatcher related to Renedial.

My idea is that Max do not find renedial.maxpat on my laptop and is unable to include in teh freezed device.

It would be great if you can send all the maxpat connected to the bpatcher in the patch (i reckon it is only renedial) so we can add this to a folder in our project path.

Thank you very much in advance.
:blush:

#57

Hello,

I reckon I found the solution.
Attached monome sat and rene’dial.
Copy rene’ dial in your packages folder of max and you shall be ok.

RenéMonomeSat 0.13.amxd (824.7 KB)
RenéDial.maxpat (11.5 KB)

Still to be sorted:

  1. the note range do not refresh when moving out of the track
  2. when using monome terms flin with renome, the columns that are used in flin are dimmed down

I will look at them as soon as I have time (maybe sunday…)

Let me know if it works.

#58

Hello,

Please see version 0.14 that also fix the range not showing issue (hopefully).
It will load up the patch with the full range enabled and then will retain the range when you switch track.
Please use the rene’dial.maxpat in my previous message if it will give you error.

Please let me know if it works, I am not an expert patcher, I just love this patch and I am trying to solve some minor issues that I have to say enhance the experience.

RenéMonomeSat 0.14.amxd (633.5 KB)

Hope it works.
I have played with it for an hour or so and I had no issues.
Peace

1 Like
#59

I’ll try it out tomorrow for sure and let you know.

#60

Yes it is working very nicely for me. Thanks @bassik.

#61

Good news !
Thanks guys for your work !

#62

Great!!!

I am happy I have not screwed it up.
It is an amazing app and very inspiring to play…thanks @chapelierfou !!!

the last issue that remains is the question related to the dim light when you use flin!!!

Also I have found the same strange behavoiur when using re:mix by @elquinto

The flin issue is appearing also in monome sum and I have posted in the relative discussion.

Now time to play with renome and maybe think about some additional feature!!! :)grin:

#63

Hello all again,
As you can imagine I am enjoying this app so much, it is now part of my setup like it is an hardware sequencer.
Yesterday night I decided to move the use of the app from the modular to an hardware synth (precisely MI Anushri) and surprisingly I have found what looks like another bug.
Before going to dig deep into the code I would like to ask if anyone has had the same strange behaviour or it is just a problem I had myself with teh particular combination of devices.

Basically, when I change the notes on teh rotary encoders, the software passes midi messages that also modify the sound of the synth.
This seems independent of turning off the remote switch in midi preferences in Ableton.

very weird!!!
It seems like it is using a different midi channel transmission, like a direct transmission through M4L.

Can anyone confirm that?
Or maybe it was a bit late at night…

#64

Oh yeah what happens is that the CCs you’re sending to move the knob are going through the patch.
What controller do you use ? I’d say you could simply remove it from TRACK INPUT in the MIDI prefs of live.
The patch is supposed to let every MIDI message through.
If really you can’t set it up properly it’s easy to block CC messages within the patch.

#65

Maybe there’s a way to block Midi control from the Anushri ? I’ve got one as well and wanted to play around with it !
Be aware as well that it’s best suitable for the use with AD enveloppes since it’s trigger based.
Nice to see that you’re enjoying it and using it, probably much more than me ! I designed it for one single gig, that’s a shame.
Nice to see that you’re rocking an Anushri as well.

#66

Thank you @chapelierfou
I will have a play with it as soon as I have the opportunity.
I have an old Doepfer Pocket control.
I reckon I shall block CC messages through the patch but I will have a check as it seems that the issue is within the controller set-up (if I change the set-up it changes the parameters controlled on the anushri).

Right now I have used it with a MI Rings…oh my god…
This is an example using MI Rings with Befaco Rampage and ES Disting mkIII and Rebel Stoicheia…+ Anushri + tanzbar…

Sequences are a mix between Rene for monome through BEAP and Tanzbar sequencer…

Hope you enjoy and thanks for listening

1 Like
#67

Thank you very much!!