#307

are you on the latest version of mangl?

alt + enc 1 should be filter cutoff
alt + enc 2 should be delay sends

here’s the code…

Screen Shot 2020-11-10 at 7.40.06 AM
Screen Shot 2020-11-10 at 7.40.06 AM812×334 26.6 KB

i can confirm that this is working as intended for me. note that alt + 2 doesn’t show anything on screen, but if you look at the tracks delay send param, it’s working.

i’ll take some time this morning to put the delay send value on screen when adjusting alt + e2.

edit: i’ve pushed a change that adds delay sends to the screen. hold alt and cutoff will be top left, sends top right.

mangl_pic-m

3 Likes
#309

Alt + enc1 and Alt + enc2 will change cutoff and delay send. I don’t think alt+enc3 is supposed to do anything. Is this the issue your video is showing?

2 Likes
#310

AHHH!! :man_facepalming:t4: can’t believe I was stuck thinking enc1 was 2 and enc2 was 3 smh

1 Like
#311

glad you got it sorted! with no labels, these things can happen lol

1 Like
#312

I finally got to connecting a MIDI controller (good ol’ nanoKontrol2) to Mangl. However I’m not able to map anything to gain, speed, jitter, size, density, pitch, spread and fade for each voice. They do show up in the parameter map for the individual voices, but I can’t get into the mapping menu with key3. Is it because these parameters are reserved for an Arc? Is there currently a way to enable those parameters to be MIDI mapped? I’m running 2.2 on 201029.

1 Like
#313

So, gain/speed/jitter/size/density/spread/fade are all taper type parameters, and at this point taper type parameters can’t be midi-mapped.

3 Likes
#314

I asked a question regarding this yesterday in the questions category. Found this out via Oooooo. Has this worked earlier? Another user seems to have had this working. Is it a firmware issue?

1 Like
#315

I did search this forum for Mangl midi mapping but did not see any mentions of the key parameters not being mappable. It would definitely be nice if there was a way to map the most important parameters to midi, Mangl certainly deserves this!

So it seems this is not Mangl-exclusive regarding taper type parameters right, @Justmat? More applications could benefit from a change in the firmware in that case, especially if they used to work before. If so this discussion should probably shift to a different topic, otherwise a Mangl-MIDI version or parameter type toggle could be a workaround?

#317

midi learn/map should work for parameters of types control, taper, number, and option. (and also now binary.)

…looking now, it seems like the logic is there for the learn function but missing for the map function… and/or taper params aren’t “mappable” by default but the other params are. i dunno. https://github.com/monome/norns/issues/1241
@tehn it seems like an easy fix.

i would attempt it myself but am in the middle of a large house move this weekend

@Justmat it may be enough to declare the params with allow_pmap=true in the constructor.

5 Likes
#318

thanks for the extra eyes and info! i’ll allow_pmap explicitly in the constructors.

2 Likes
#319

made a little max patch to control mangl over osc and called it mango :mango::blush: here’s a vid of me using it:

going to look into getting osc data back from norns to update the max patch when parameters are changed on the norns

hopefully can get started in learning lua soon, want to look into adding the ability to move the loop you can set with alt+k2 with the position parameter

4 Likes
#320

Wow! I just got an Arc and Mangl was my first experience. I initially had issues but after a reinstall it was running beautifully. I was instantly in a sonic wonderland :sparkles:
Thanks @Justmat
Wishing there was a way to record straight in but from memory its an engine limitation?

3 Likes
#321

oooh that’s a nice idea!

1 Like
#322

yeah, recording isn’t supported as of now. i’ve been meaning to make another granular script that focuses on live input, just haven’t got around to it yet :sweat_smile:

10 Likes
#323

Oh I would LOVE a granular script that focuses on live input! Maybe after your new looper app you could start :pray:
Mangl is still so awesome. I did a little recording I’ll upload to the gram soon.

4 Likes
#324

is mangl set up to output osc? or is that something that gets added to scripts specifically? i’m working in max and wondering how I could use the udprecieve object to receive osc data about changes in parameters happening on the norns

#325

mangle is not setup to send osc, that type of thing needs to be implemented per script. looking at the norns osc docs makes it seem pretty simple. there’s a callback function for receiving osc, and a method for sending osc.

1 Like
#326

stereo option here wld be dope !

#327

quick one. is the clipping/distortion issue fixed on mangl? im using a fairly recent version, but am going to try and reinstall w/latest update today - thanks for the great script.
wanted to use mangl instead of glut last night below —> but ended up last minute using glut bc of the clipping issues in mangl : /

1 Like
#328

clipping is fixed in the current version :slight_smile: update away!

2 Likes