#1668

i was able to update manually just a few moments ago

#1669

This is wonderful! The led animations are super helpful.
Any chance you could add the this/that cv modes that were added in the last firmware update?

#1670

yea, I stopped at modes within modes! down the line i might, but it will be a while…

2 Likes
#1671

I think I found a typo in the Live mode section:

  • ↑ add a cue (write to tape)
  • ↓ add a cue and loop

I believe this is reversed. ↑ adds a cue and loops, whereas ↓ simply adds a cue.

2 Likes
#1672

hmmmm, yes indeed!

26

really unhelpful to put the ↓ above the ↑ on the flashcard too. i remember getting mixed results with this, even now had some issues verifying it. will send an update soonish, along with some line spacing fixes. grr. p.s. nice catch, thanks!

2 Likes
#1673

So, Modes contains ports of various modules? Amazing! Can they be chained/grouped? Seriously good incentive to pick up an ipad.

#1674

umm…, only help docs for them.

#1675

Oh right, I completely misunderstood. Thanks for clearing that up.

1 Like
#1676

Heres 2 w/. I use them on the master outs with one going into the other and alternating between them

9 Likes
#1677

Hey all. I’m considering getting a w/ for use with Teletype but curious if the integration is still being improved. I’d love to be able to create cue points with Teletype and maybe change playback speeds. Does anyone know what the development roadmap might look like?

1 Like
#1678

Is anyone aware of a way to control the mix between input signal and w/ recordings?
I use two w/ as a stereo delay/looper and id love to have a wet/dry mix

1 Like
#1679

Hmmm, maybe not in w/ internally. However, you could use a couple of vcas or a mixer and turning off monitoring. Mult your dry signal to one vca/mix channel and into the w/ input, and your w/ output to a second.

To turn off monitoring, hold rec to enter global mode, short press rec again then toggle down to exit global mode. Will need to be changed again if you change tapes.

#1680

Setting up an external wet/dry mix isn’t ideal as its a stereo path and would take up a lot of modules I either don’t have or are currently using. ive just down sized to 7U.
Id really love to have a a way to set the volume of the monitor and recorded material using the up/down toggles. Maybe in a firmware update?

1 Like
#1682

My W/ arrived last night and wow, reading this thread from start to finish over the course of a few days has led to quite the brain drain - jotted down a few notes that I’m hoping made the reading worthwhile. I’m enjoying the module so far, and while I’m still nervous and want to test for rock solid live use reliability, I’m cautiously optimistic. Really glad I didn’t have the emotional ups and downs of early adopters in this thread. v1.2.1 seems to be significantly more usable. Are there any plans for new updates/expansions of functionality or does that seem unlikely at this point?

8 Likes
#1683

There was talk of W/ type being expanded quite a lot (I think 20 commands were proposed, there are currently 4) and possibly the code being made open source at some point.

2 Likes
#1684

Additions/changes to WType would be top of my list. I’d love to have better control over the tape speed, and also the ability to add cue points, clear all the cue points, jump to tape start, and clear the tape.

7 Likes
#1685

id love love love this but i’d really love it to be available via cv in [this]/[that] - i guess access via the settings “menu” in the recent firmware

2 Likes
#1686

@Galapagoose @voidstar

do you plan also a technical map for W/(with)? That would be pretty awesome.
Because even I’m getting more and more familiar with the different modes of the module, there are situations where i’ve no clue what’s actually happen :slight_smile:

15 Likes
#1687

I’ll second that. A technical map for W/ would be great.

6 Likes
#1688

Is W/ type still being developed for? Would love some more teletype ops!

5 Likes