#1

Hi there guys, i just installed Mark Eats as it seemed great to use with my Airbase, but it recognizes my grid as 64… i was scared so i opened Polygome again, all fine so far with poly. Did anyone got something similar, is there anything i’m missing?

#2

hey, i’ve heard rumour of this problem before but never been able to reproduce it :expressionless:

can i ask what kind of grid you have, what serialosc version you’re running and if Sequencer always detects it as a 64 or only sometimes?

#3

Hey Mark! thanks for replying that fast. I’m using the new grid, i build one of the kits.
I didn’t install serialosc, i installed the monome sum package as i read that includes all drivers… i’m very new with this so i might be missing something. So far everything works fine with Parc and Polygome

#4

OK cool that should be all you need.

I’d love to know what you see in the console (open the Console app) when you connect to the monome with Sequencer and this happens. There should be some lines that start with ‘Sequencer’. And yeah if it always happens or if it’s intermittent.

#5

I’ll check that now, no it’s not intermittent… will report back in a while :smile:

#6

Alright, this is a long one, if you want the full sequence tell me, otherwise i think this is enough, it appears clrearly, but not sure why this happens

#7

15/08/15 18:51:01,437 MIDIServer[7802]: Bluetooth MIDI driver is starting …
15/08/15 18:51:01,439 MIDIServer[7802]: Bluetooth MIDI driver finished starting.
15/08/15 18:51:02,378 Sequencer[7800]: MIDI source: To Mark Eats Sequencer
15/08/15 18:51:02,379 Sequencer[7800]: MIDI destination: From Mark Eats Sequencer
15/08/15 18:51:02,379 Sequencer[7800]: OSC in port: 12234
15/08/15 18:51:02,380 Sequencer[7800]: OSC out port: 12234
15/08/15 18:51:02,380 Sequencer[7800]: OSC prefix: markeatsseq
15/08/15 18:51:02,628 Sequencer[7800]: Auto-connecting…
15/08/15 18:51:02,628 Sequencer[7800]: Connecting to grid controller…
15/08/15 18:51:02,722 Sequencer[7800]: WARNING: Monome returned size: 0x0 using 8x8 instead
15/08/15 18:51:02,723 Sequencer[7800]: Connected to grid controller: m0001714 / Size: 8x8 / Type: 1 / Varibright: 1
15/08/15 18:51:05,000 kernel[0]: disk0s2: I/O error.
15/08/15 18:51:05,285 systemstatsd[7812]: assertion failed: 14E46: systemstatsd + 3258 [7ABA0061-5219-3DC9-ACDC-A98BA722D473]: 0xa
15/08/15 18:51:05,000 kernel[0]: disk0s2: I/O error.
15/08/15 18:51:05,972 systemstatsd[7812]: assertion failed: 14E46: systemstatsd + 3297 [7ABA0061-5219-3DC9-ACDC-A98BA722D473]: 0xa
15/08/15 18:51:05,000 kernel[0]: disk0s2: I/O error.
15/08/15 18:51:05,973 systemstatsd[7812]: assertion failed: 14E46: systemstatsd + 5082 [7ABA0061-5219-3DC9-ACDC-A98BA722D473]: 0xa
15/08/15 18:51:05,974 com.apple.xpc.launchd[1]: (com.apple.systemstatsd[7812]) Service exited with abnormal code: 1
15/08/15 18:51:05,974 com.apple.xpc.launchd[1]: (com.apple.systemstatsd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
15/08/15 18:51:07,723 Sequencer[7800]: Calibration of tilt sensor timed out
15/08/15 18:51:07,723 Sequencer[7800]: No tilt calibration data received, assuming default values
15/08/15 18:51:07,723 Sequencer[7800]: Calibrated tilt sensor to XCenter: 126 / YCenter: 126 / Range: 35 / DeadZone: 2
15/08/15 18:51:15,000 kernel[0]: disk0s2: I/O error.
15/08/15 18:51:15,993 systemstatsd[7847]: assertion failed: 14E46: systemstatsd + 3258 [7ABA0061-5219-3DC9-ACDC-A98BA722D473]: 0xa
15/08/15 18:51:16,000 kernel[0]: disk0s2: I/O error.

#8

then it goes over and over with that failure

#9

Thanks! Hmm OK well that tells me something but not everything.

If you’re up for helping me track this down I’d love to see the results of the following:

#10

Hey Mark!
Just arrive from some days off… Will get into that right now and report back!

#11

Mark, sorry for taking this long. here the console log with your DEBUG version. Not too long, still having half of the grid operative

07/09/15 18:04:37,000 kernel[0]: AppleUSBFTDI: fInBufPool,kMaxInBufPool 8,64
07/09/15 18:04:37,000 kernel[0]: AppleUSBFTDI: Version number - 1.0.1b16, Input buffers 8, Output buffers 16
07/09/15 18:04:42,447 SystemUIServer[223]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
07/09/15 18:04:51,792 MIDIServer[391]: Bluetooth MIDI driver is starting …
07/09/15 18:04:51,794 MIDIServer[391]: Bluetooth MIDI driver finished starting.
07/09/15 18:04:52,990 Sequencer[389]: MIDI source: To Mark Eats Sequencer
07/09/15 18:04:52,990 Sequencer[389]: MIDI destination: From Mark Eats Sequencer
07/09/15 18:04:52,992 Sequencer[389]: OSC in port: 12234
07/09/15 18:04:52,992 Sequencer[389]: OSC out port: 12234
07/09/15 18:04:52,992 Sequencer[389]: OSC prefix: markeatsseq
07/09/15 18:04:52,993 Sequencer[389]: !sendOsc: <OSCMessage ‘/serialosc/list’-’(
“”,
“<OSCVal i 12234>”
)’>
07/09/15 18:04:52,994 Sequencer[389]: !sendOsc: <OSCMessage ‘/serialosc/notify’-’(
“”,
“<OSCVal i 12234>”
)’>
07/09/15 18:04:53,275 Sequencer[389]: OSC received /serialosc/device m0001714 monome 12814
07/09/15 18:04:53,276 Sequencer[389]: valueArray: (
“”,
“”,
“<OSCVal i 12814>”
)
07/09/15 18:04:53,276 Sequencer[389]: Auto-connecting…
07/09/15 18:04:53,276 Sequencer[389]: Connecting to grid controller…
07/09/15 18:04:53,276 Sequencer[389]: !sendOsc: <OSCMessage ‘/sys/host’, ‘’>
07/09/15 18:04:53,277 Sequencer[389]: !sendOsc: <OSCMessage ‘/sys/port’, ‘<OSCVal i 12234>’>
07/09/15 18:04:53,277 Sequencer[389]: !sendOsc: <OSCMessage ‘/sys/prefix’, ‘’>
07/09/15 18:04:53,277 Sequencer[389]: !sendOsc: <OSCMessage ‘/sys/info’, ‘<OSCVal i 12234>’>
07/09/15 18:04:53,277 Sequencer[389]: !sendOsc: <OSCMessage ‘/markeatsseq/tilt/set’-’(
“<OSCVal i 0>”,
“<OSCVal i 1>”
)’>
07/09/15 18:04:53,286 Sequencer[389]: OSC received /sys/host localhost
07/09/15 18:04:53,287 Sequencer[389]: value:
07/09/15 18:04:53,287 Sequencer[389]: OSC received /sys/host localhost
07/09/15 18:04:53,287 Sequencer[389]: value:
07/09/15 18:04:53,287 Sequencer[389]: OSC received /sys/port 12234
07/09/15 18:04:53,287 Sequencer[389]: value: <OSCVal i 12234>
07/09/15 18:04:53,287 Sequencer[389]: OSC received /sys/port 12234
07/09/15 18:04:53,288 Sequencer[389]: value: <OSCVal i 12234>
07/09/15 18:04:53,288 Sequencer[389]: OSC received /sys/prefix /markeatsseq
07/09/15 18:04:53,288 Sequencer[389]: value: <OSCVal s /markeatsseq>
07/09/15 18:04:53,288 Sequencer[389]: OSC received /sys/id m0001714
07/09/15 18:04:53,288 Sequencer[389]: value:
07/09/15 18:04:53,288 Sequencer[389]: OSC received /sys/size 0 0
07/09/15 18:04:53,288 Sequencer[389]: valueArray: (
“<OSCVal i 0>”,
“<OSCVal i 0>”
)
07/09/15 18:04:53,289 Sequencer[389]: WARNING: Monome returned size: 0x0 using 8x8 instead
07/09/15 18:04:53,289 Sequencer[389]: Connected to grid controller: m0001714 / Size: 8x8 / Type: 1 / Varibright: 1
07/09/15 18:04:53,291 Sequencer[389]: OSC received /sys/host localhost
07/09/15 18:04:53,292 Sequencer[389]: value:
07/09/15 18:04:53,292 Sequencer[389]: OSC received /sys/port 12234
07/09/15 18:04:53,292 Sequencer[389]: value: <OSCVal i 12234>
07/09/15 18:04:53,292 Sequencer[389]: OSC received /sys/prefix /markeatsseq
07/09/15 18:04:53,292 Sequencer[389]: value: <OSCVal s /markeatsseq>
07/09/15 18:04:53,292 Sequencer[389]: OSC received /sys/rotation 0
07/09/15 18:04:53,292 Sequencer[389]: value: <OSCVal i 0>
07/09/15 18:04:58,289 Sequencer[389]: Calibration of tilt sensor timed out
07/09/15 18:04:58,289 Sequencer[389]: No tilt calibration data received, assuming default values
07/09/15 18:04:58,289 Sequencer[389]: Calibrated tilt sensor to XCenter: 126 / YCenter: 126 / Range: 35 / DeadZone: 2
07/09/15 18:04:59,638 Sequencer[389]: OSC received /markeatsseq/grid/key 2 3 1
07/09/15 18:04:59,638 Sequencer[389]: valueArray: (
“<OSCVal i 2>”,
“<OSCVal i 3>”,
“<OSCVal i 1>”
)
07/09/15 18:04:59,712 Sequencer[389]: OSC received /markeatsseq/grid/key 2 3 0
07/09/15 18:04:59,712 Sequencer[389]: valueArray: (
“<OSCVal i 2>”,
“<OSCVal i 3>”,
“<OSCVal i 0>”
)

#12

Hi just wanted to say thanks for trying that and I will definitely dive into it soon, just a little busy atm :slight_smile:

At first glance I think I may have to quiz you a little more to track this done but I want to try a few things my side first.

#13

No problem :slight_smile: at your disposal

#14

OK so I know this is several months later but if you do still have time I’d still be interested in tracking this one down!

I put together a simple test app:
http://www.markeats.com/sequencer/old-versions/monome-connection-test-001.zip

Can you try:

  • Plug in the grid
  • Open the test app
  • Choose the monome from the dropdown
  • Hold a key on the monome for a second and you should see a test pattern across the whole grid (or not)
  • Let me know what you see, and copy and paste the log it produces in it’s window back here.

Thanks!

#15

Of course! will report back tomorrow :slight_smile:

#16

I’ve had the same problem as OP but didn’t chime in – happy to help testing!

[2016-12-30 19:05:20] Raw OSC: <OSCMessage ‘/serialosc/device’-’(
“”,
“<OSCVal s monome 128>”,
“<OSCVal i 18294>”
)’>
[2016-12-30 19:05:29] Selected OSC out address 127.0.0.1
[2016-12-30 19:05:29] Selected OSC out port 18294
[2016-12-30 19:05:29] Trying to connect…
[2016-12-30 19:05:29] Raw OSC: <OSCMessage ‘/sys/port’, ‘<OSCVal i 12234>’>
[2016-12-30 19:05:29] Raw OSC: <OSCMessage ‘/sys/prefix’, ‘<OSCVal s /markeatsseq>’>
[2016-12-30 19:05:29] Raw OSC: <OSCMessage ‘/sys/id’, ‘’>
[2016-12-30 19:05:29] Raw OSC: <OSCMessage ‘/sys/size’-’(
“<OSCVal i 16>”,
“<OSCVal i 8>”
)’>
[2016-12-30 19:05:29] Grid size set to 16x8
[2016-12-30 19:05:29] Connected OK to monome!
[2016-12-30 19:05:29] Raw OSC: <OSCMessage ‘/sys/host’, ‘’>
[2016-12-30 19:05:29] Raw OSC: <OSCMessage ‘/sys/port’, ‘<OSCVal i 12234>’>
[2016-12-30 19:05:29] Raw OSC: <OSCMessage ‘/sys/prefix’, ‘<OSCVal s /markeatsseq>’>
[2016-12-30 19:05:29] Raw OSC: <OSCMessage ‘/sys/size’-’(
“<OSCVal i 16>”,
“<OSCVal i 8>”
)’>
[2016-12-30 19:05:29] Grid size set to 16x8
[2016-12-30 19:05:29] Connected OK to monome!
[2016-12-30 19:05:29] Raw OSC: <OSCMessage ‘/sys/rotation’, ‘<OSCVal i 0>’>
[2016-12-30 19:05:34] Raw OSC: <OSCMessage ‘/markeatsseq/grid/key’-’(
“<OSCVal i 0>”,
“<OSCVal i 3>”,
“<OSCVal i 1>”
)’>
[2016-12-30 19:05:37] Raw OSC: <OSCMessage ‘/markeatsseq/grid/key’-’(
“<OSCVal i 0>”,
“<OSCVal i 3>”,
“<OSCVal i 0>”
)’>

#17

(I saw the pattern across the whole 128).

#18

Ah it looks like the stuff in quotes is getting removed by the forum software… could you try formatting it as code like this:

[2015-12-31 13:37:07] Raw OSC: <OSCMessage '/serialosc/device'-'(
    "<OSCVal s m0000871>",
    "<OSCVal s monome 256>",
    "<OSCVal i 13792>"
)'>

Although if it’s detecting the size OK then it’s probably not needed :slight_smile:

#19

Hi @damianschwartz just wondered if you’d had a chance to try this?

#20

Hello Mark
Sorry for taking so long, i was in Argentina for a month visiting my family, came back last week but it’s taking me a lot to put up with everything, will try that tonight and will post results here :slight_smile: