#127

this is awesome!!!

1 Like
#128

on the peak of Mount Lawlor in the San Gabriel Mountains. The power supply is a Voltaic V88 which can be solar powered. I have left it on overnight with this set up and it was still going in the morning!

IMG_3973
IMG_39733024×4032 2.12 MB
IMG_3981
IMG_39814032×3024 2.28 MB

IMG_4009
IMG_40093024×4032 2.97 MB

27 Likes
#129

Mostly curious but could this speaker/battery prower a small modular?

JBL Boombox
https://www.jbl.com/madness-sale/JBL+BOOMBOX.html?cgid=madness-sale&dwvar_JBL%20BOOMBOX_color=Black-USA-Current#start=1

I can’t seam to find or make sense of if this could power a polysend anywhere or what the power out is. I found it mostly interesting if the speaker could be a all in one solution…given the speaker itself I would not say it’s portable to go remote but could be a option to go to the local park or backyard.

#130

Spec sheet says 20W each output on battery. That’s 4A @ 5V, plenty for the Polyend Anywhere.

2 Likes
#131

Out and about with my mobile setup as well recently. This is from yesterday afternoon.

stt-2019-10-20_3
stt-2019-10-20_32000×1333 2.51 MB

11 Likes
#132

Just got an Aimtom battery pack, testing it out on my front porch before I take it to the lake this afternoon <3

1 Like
#133

the grids + zissou laptop rules, I have one of those as well

1 Like
#134

I’m a big fan, I have the 1u nearness and the RIP in 1u to build as well so that should hopefully really beef up the capabilities.

1 Like
#135

I have an ansible coming today and a 1u panel for it on the way too :smiley:

1 Like
#136

Picked one up after seeing your post

Screen Shot 2020-05-06 at 12.56.52 PM
Screen Shot 2020-05-06 at 12.56.52 PM1118×1624 885 KB

18 Likes
#137

nice, they are great!

#138

Just made a hacky 1u adapter for ansible. Mobile setup #2 is operational

image
image1280×958 321 KB

15 Likes
#139

What is the benefit of these Voltaic batteries? Is it that you intend to use them with a remote solar panel? Curious what justifies the size to mah ratio, or is it a matter of quality? They do look nice

#140

I’m sure there are cheaper options, I just went with it because its pretty versatile and good quality

#141

I run this 19” 3+1u (Pulp Logic frame) via a Jackery with a full on 3prong plug. Sometimes with a splitter for cameras though usually remember to charge the camera batteries.

2 Likes
#142

Has anybody had luck with Ripcords?
Thinking of getting the 15v one with a big powerbank for my palette, but have actually never seen it power one of those before…

1 Like
#143

Hi,
Been using one with my 62hp palette without issue.

2 Likes
#144

I like the janky crooked Quadratt, how much hp does it take up like that?

1 Like
#145

hey,
i wondered if anybody could help me on the subject since my knowledge on power consumptions and the like is limited.

i ordered a polyend anywhere to supply power to a little case i just built
and am now looking for a suitable powerbank
(polyend states it should supply at least 2A )

ive got my eyes on the powerbank model Anker PowerCore 26800
and just wanted to ask are there obvious reasons why this shouldnt work that i cant see?

another thing i might want to do, is power 2 little cases in the future
is there anybody that could recommend a powerbank for this purpose?

all the best

#146

Mine Polyend works totally fine with PowerCore 10400. 26800 can ouput 3x 2A or 2X 3A so should be enough for two Polyends for sure.