Thanks for that…
This has been a great night for me, I decided to really sit down with a determined spirit to try and learn a bit on my own rather than just rely on your wonderful patience…
I have managed to get my single lp mini mk2 working with Awake… I had to use the code above with “mg_128” in it rather than the default midigrid line that was in the pdf guide I was following… I also came across an error of nothing loading when I first tried this… But I remembered from another thread someone correcting a line that had “directional” curly quote marks… I thought " I wonder"… So I corrected that myself, and lo and behold, it worked!!
Inspires by that I took on cheat codes 2 and made the same changes (before trying it)… And this time although it worked, it was clunky again… Kind of a similar “broken but not fully broken” as I had for Awake initially… So… I then realised there are options within the edit settings menu for setting grid type etc… So… Back to maiden… Reload the original unaltered script… Back to loading cheat codes 2 on norns… Making my settings in cheat codes 2’s own settings… And… There we go…Two apps working great with the grid…
So… My next attempt was MLR… Hmmm
So, I found the line at about line 42
g = grid. Connect()
So I do as I learnt in the Awake guide and added a new line above and typed
local grid = include(“midigrid/lib/mg_128”)
But this time No dice… MLR now fails upon startup
Can anyone shed some light? I don’t want to be a burden and I am trying to learn to apply what I am being told, but I’m a bit stumped
I’m really enjoying the soothing sounds from Loom and using midigrid it accepts input for notes and triggers. Problem is there is no LED output at all on my Launchpad Mk2. MIDI out gives some LED action so possibly there is a conflict with MIDI and grid devices? I’ve tried adding the relevant line of midigrid code at various places, commenting out other possibly relevant grid and MIDI stuff and changing the default devices but I am not an experienced coder. If anyone has got Loom to work fully with midigrid, could they give me some pointers? Cheers in advance and thanks very much for midigrid.
Hey just got my Norns shield assembled and looking to get my Livid Ohm RGB working with it. Searching this thread, I think I saw support for the Livid Block in post Norns: alternative grids - #299 by DoS
Trying to get a grid device to pair with my norns, but due to NeoTrellis 16x8 not being manufactured anymore and Monome Grid still out of stock was wondering if there are any other alternatives to a 16x8 grid?
I haven’t recorded anything.
The most versatile script in Norns for TouchOSC is Cheat Codes (probably). I recommend you to take a look to the page and the documentation, It’s as deep as powerful instrument.
Good luck with your investigation and let me know if you need some help
Somewhat OT, but I have been e-mailing back and forth with the author of ODDSound MTS-ESP Microtuning System (https://www.oddsound.com/), which permits microtunings to be applied easily across many different instruments within a DAW. There is Novation Launchpad support for the program, but only MK1 and MK3 - not MK2 (or Mini MK1 or Mini MK2). The developer says that this is because the MK2 does not have a programmer mode. However, I explained that the good folks here got the MK2 working alongside the MK1 and MK3 Launchpads pretty quickly, and in much the same manner, and thus the MK2 must be “programmable” in some way. Not being a programmer myself, and with very little experience programming, what information would I need to provide to this developer to allow him to get the MK2 up and running in his software without access to a similar “programmer mode”?
The Deluge has already been mentioned in this thread but wouldn´t it be possible to use the touchOSC as a “translator” between the Deluge and the norns? There is already a way to control the norns with touchOSC. I´m a noob, but if it would be possible to send midi from the Deluge to touchOSC, would it be possible?