#335

Here is the markdown documentation for strides!

9 Likes
#336

Thanks for that, I was confused about what f, k and l functions, but now I’m not :slight_smile:

1 Like
#337

Probably a stupid question but I tried searching to no avail.

I’ve just got a Norns and I’m playing with Awake to start. I’m using a 1/4" set of headphones in the far left jack, but I only hear sequence one. I’ve programmed steps into both but I only hear the audio from the top sequence.

1 Like
#338

that is expected :slight_smile:
the bottom sequence just modifies the first, i.e. raises or lowers the note value of the top sequence.

edit: btw, welcome to Norns!

1 Like
#339

See? I knew it was a silly question. Many thanks, excited to get started.

2 Likes
#340

It’ll blow your mind. In fact this week I’m getting a second one :rainbow:

2 Likes
#341

While I’m at it, next question. On alphacactus’s glorb_wurm_brid, I’m occasionally getting some distorted glitches that sound like clipping, not the synth itself. Anyone else run into this?

#342

If you are running through a mixer, don’t make the mistake I made. Check to make sure your channel trim/gain levels are not too high. I set mine back to the defaults and norns is producing nothing but happy sounds now.

1 Like
#343

Thanks, right now I’m just running direct out to headphones from the headphone out on Norns

1 Like
#344

Test with/without reverb. Reverb adds a lot of drain on things. Could be a cause.

1 Like
#345

Thanks, just powered cycled Norns and that seems to make it happy. Yeah, reverb adds a lot of noise, I probably won’t use it much once I’m using Norns with the rest of my gear but its a nice-to-have when playing it standalone.

3 Likes
#346

With the next firmware you’ll be able to use 15sec reverb with no impact on the processor. I love it :slight_smile:

9 Likes
#347

Hey
has someone tried to connect a arturia beatstep pro to norns?
I was using the hello_gong script and wanted to control some parameters via Midi cc. Since there some settings for midi cc, I thought this could work.
But i did not manage to get it right. I set the timre cc for example to 10. when i look on my devices control center cc #10 would be the knob number 1.
So … it did not work…
does someone have a tip for me?

#348

Have you tried using midi learn?
From the parameters page press button 1 to access the load/save/assign cc page, put cc assign to on, then scroll to the parameter you want to assign and press button 3 and move the knob on the controller, and it gets assigned automatically.

3 Likes
#349

Thanks for the answer.
it did not work over the USB out of the Beatstep.
Finally I used the Midi Out with an adapter to USB and this worked.

thanks for the help

2 Likes
#350

possible known issue when device has multiple ports

would be helpful to confirm beatstep pro port complement

#351

@Justmat is it possible to increase the sample time in strides?

#352

Not directly from the strides code. Strides uses the Ack sampling engine, coded by @jah, and I am pretty sure those types of changes would need to be made there. What are you hoping to accomplish? There are a few other sample based engines that might better suited your needs :slight_smile:

#353

Has anyone got a version of Glut updated for 2.0? I’m getting a metro related error when trying to run the version from master

#354

Was attempting this yesterday, I think the issue lies with ‘gridbuf.lua’. Maybe @artfwo could help out.