#194

search a little further back up the thread

#195

no it doesn’t presently work for me unless someone has cracked it
is the grids supported in the Mec/Orac version of things, perhaps i am not grasping it fully but i was curious. I may be unclear as to Mec’s role-- perhaps that’s only in regards to midi?
I am just hopeful of the grail of using grids/arcs seamlessly in Norns with Pd

#196

recorded samples are not saved? thanks

#197

When you press button one and it brings up a menu, how do you modify the values inside the menu?

On the lcd some times i get index parameters from 1-4 and then at the bottom of the screen i get a 12Seq: Stop but cannot change it…

Cheers!

#198

Does the recording of sequencers via aux work?

I have replicated a organelle and it cc messages and midi notes and i can change settings on the sequencer ( aux + key note) but i cannot get the sequencer to play back the notes.

I am feeding the sequencer with a midi clock…

Cheers :slight_smile:

#199

i don’t know if this is the best place for this post, or if the norns: help thread would be better but here goes:

i didn’t read about the manual update process and ran Update Mother. my fates just said Load…Update Mother and was unresponsive. i powered it off and powered it back on (didn’t know what else to do!), and started getting the “error: supercollider fail” message on boot, also no audio during the norns boot animation. i then checked this thread, did the manual update, rebooted; no luck. i tried updating sidekick, no luck. can’t connect to sc in matron, but ran sclang over ssh. just don’t know how to interpret the output!

here's what sclang spit out 
*** Welcome to SuperCollider 3.10.0. *** For help type ctrl-c ctrl-h (Emacs) or :SChelp (vim) or ctrl-U (sced/gedit).

Booting server 'localhost' on address 127.0.0.1:57110.

sc3> Found 0 LADSPA plugins

Cannot connect to server socket err = No such file or directory

Cannot connect to server request channel

jack server is not running or cannot be started

JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock

JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock

terminate called without an active exception

could not initialize audio.

any help would be greatly appreciated! i backed up my dust folder so that if i have to reflash my fates image, there’s one less step in the way :joy:

Norns: crone/supercollider
#200

NornsMother does not interfere with Norns software, it’s just a addon for Sidekick, it doesn’t overwrite system files or configuration files.
You are able to boot into Sidekick menu? Power up your Fates and press button 1 while it´s booting, Sidekick menu should appear.

#201

Hi folks
I am looking for some help with running Axiome 4 on Norns Mom
axiome-0.2

Requirements: Pure Data, Livid Block Controller, Norns
optional; MIDI expander unit

Anyone else in //// got one and interested?

Axiome-0.3-sneak-peek.zip (44.6 KB)

It’s working perfectly on pd with linux 64 and i don’t see any reason why it wouldn’t work on Norns. Superfun if you happen to have an old block

2 Likes
#202

I’ll try to get my block out and test this later. :slight_smile:

1 Like
#203

what i am hoping is that the loading of separate tracks can be menu-ized on Mother
how do you patch midi in Mother? Things will collapse fast if i cant patch it similar to qtjactctl

#204

so how do i make axiome work?

theres no main.pd so it’s not showing up in the mother menu?

#205

axiome.pd need to be renamed
i am just starting this going to do the first transfer after confirming it worked on linux
sorry that was not clear

1 Like
#206

Hey Apparently the update to mother dusted the patches folder? I must have missed this

#207

OMG you win this thread for that alone :crying_laughing:

2 Likes
#208

ha!
Axiome works perfectly on linux64. I could not get the organelle to power the Block and i assume the same would happen with the Norns.
I did not see the “bug” in the repo that apparently deletes the ~/sidekick/patches
folder and replaces it with a completely different structure that now has
/sidekick/demos/patches/pd instead so i am tapping out on Norns mom, it was a fun distraction for a while but i think sidekick is geared for orac going forward.

i don’t want to mislead anyone into thinking i am developing it for NornsMom/Organelle.

#209

It was mentioned up the thread. Sorry to hear you lost your patches.

I don’t think anybody thought so, at least not I.

1 Like
#210

Axiome is an ancient monome-ish patch that i really had hopes of trying on Norns/or Organelle but i think underlying the issue is that its just not getting enough juice through the USB to even get to the fixing it on Norns Mom.

Axiome is like Mlr with seven programmable loops and it works perfectly in linux so i had hopes of converting it for use without a Block for pd. My additions included midi controlled EQ/Reverb with the midi breakout add-on and some tidying of stuff Heikki did.

#211

This is awesome! Thank you very much for your work, I’m gonna test it on my fates tonight. I already own an organelle and I often wondered on how would it be to jam with two of them together. I’m going to test few - not already tested - patches to give my contribution :slight_smile:

1 Like
#212

Hey everybody, I tested some of the patches I have on my organelle,
some of them work flawlessly, others don’t at all, few of them make clicks/pops/noises
while fiddling with knobs. hope it helps in some way.

Euclidean rythms - not working
Xylophone - working
Tapey - working
Tape synth - not working
ACME beat machine - not working
ACME sequencer - doesn’t work properly in every function
Additive 1.0 - synth engine works, sequencer doesn’t. sound glitches here and there
Additive synth 6 poly - working (noises while turning encoders)
Arp II - not working
Arp III - not working
Cassette linndrum LM-2 - working
Granulator - not working
Continental breakfast - working
Euclidean traveller - not working
Flute - working
Koto - working
LoFi piano - working
LoFi polykess - working
M1 piano - working
MFB synth like - doesn’t work properly/glitchy
minimoog - working
morphagene4 - doesn’t work properly
pianelle
Pink mode - some strage behavior here and there but mostly working
Polybeats DRG32V - working
Polyloops - not working
Polystep - not working
Pow pow’s Polybeats - working
Rhodey - working
roganelle - working
RT Juno 104 - working
SB-minimoog - working
Simple strings - working but clicks and pops while fiddling with knobs, aux button doesn’t work
Strings - working (some click and pop while fiddling with knobs)
Supersynthengine - working

I generally found out that patches in which sequencer/looper screen is activated via aux button
don’t work as they should. the key command in combo with aux button pressed is not recognized,
so it’s not possible to trigger those secondary functions. other patches that usually display the organelle keyboard as visual feedback on notes or step triggered don’t show the same layout, I guess obviously :slight_smile:

some patch added - thanks @shreeswifty
BrokenBeats - working (super fun patch! can’t figure out if it’s possible to change the default loop with other preloaded ones or swap it with a sliced one of your own)
Bubbler plus - working
Multifx_n - working
Residency - working

13 Likes
#213

We should have a wiki (or a wiki post here on lines?) for listing all the patches that work (with version number/date of Norns Mother attached). @Oxbown, what if the first post was editable and everybody could add to this information? (I think that in the lines flavor of Discourse, the admins need to do this, unless you see a wrench icon at the bottom of your post?)

5 Likes