#19

Worked for me. Looks great! Stoked for the Tape revisions! Thanks, keep up the great work.

#20

sounds like the wifi isn’t working generally. can you connect via maiden? does the catalog update work?

#21

Strange! I put it into hotspot mode to get into maiden and checked around for any errors or loose code, things looked ok, rebooted and then tried connecting to WIFI again and finally completed the connection, attempted to update again and voila: it updated flawlessly.

Not sure what happened this go around but I appreciate the help.

1 Like
#22

Curious for script compatibility…

What happens with the new params features (groups, separators, etc) if someone is on an older version of norns? Ignored? Errors?

I’m already updated and can’t immediately test

1 Like
#23

Was there any audio level changes? I’m noticing a change in loudness, but unsure where to start searching :slight_smile:

#24

@kveye I’ve found that the Output level seems to get reset at odd times to full after this update. Haven’t spent enough time with it to know for sure but seems to have happened with Reels and Mangl - so if you are finding that things are louder that may be it.

Will try to pin this behavior down since “it seems to do this sometimes” is a terrible way to describe a problem.

#25

Not sure this can be any help, but the update failed two times for me over WIFI. Then I disconnected everything but the power cable and tried again and it worked.

Could be some dodgy cable on my side. I often have the problem that the audio is super-low when the thing boots with all cables attached.

2 Likes
#26

@kveye + @kingmetal, this is likely related:

2 Likes
#27

For backing up any rpi based project, I use ApplePi-baker to make bit-wise backups of the sd cards. I know there was discussion of another program somewhere in the fates thread for a windows option.

#28

You can generate an image file from an SD card with Disk Utility on MacOS as well.

#29

docs updated!

params: https://monome.org/docs/norns/play/#parameters
tape: https://monome.org/docs/norns/play/#tape
soft reset: https://monome.org/docs/norns/play/#sleep

lmk if anything’s missing from these usability docs – i’ll be starting a new thread/call-for-help to do study rewrites super soon!

16 Likes
#30

Is it just me, or are the sub headers a bit small? :sweat_smile:

Screen Shot 2020-03-25 at 10.01.15 AM
Screen Shot 2020-03-25 at 10.01.15 AM1348×736 37.2 KB

Great job on the docs btw! :grin:

1 Like
#31

that sweet, sweet fourth header size

not a very compelling formatting choice, for sure. lemme mock up some alt approaches, great call out!

2 Likes
#32

now that i see it— the only time H1 (single #) is used is in the page title.

so we should probably just upgrade all the headers to one level up. (i can do this in an automated fashion)

otherwise, if we’re hitting H4 that might mean we should have sub-pages? :slight_smile:

what do you think?

2 Likes
#33

I can’t speak to the code or the coders, but as a user I really appreciate the immediacy of navigation. One-level down of pages makes lots of sense (scripts that have lots of samples and settings take forever to scroll) but I think digging a rabbit hole could be exactly that.

2 Likes
#34

Oopsie: “K3 on a separator jumps to next section”

1 Like
#35

is there a way to save a global parameter as a temporary fix for now? i have to re-set my monitor and tape levels every time i open a script

#36

since updating my mixer settings get reset upon opening any script to make both monitor and tape levels = 0

#37

Haven’t really got the chance to play around with my Norns Shield since the update, but I really like that Tape now loops the audio file!

1 Like
Compass
#38

6 posts were merged into an existing topic: DIY monome compatible grid w/ Adafruit NeoTrellis