#25

Not sure this can be any help, but the update failed two times for me over WIFI. Then I disconnected everything but the power cable and tried again and it worked.

Could be some dodgy cable on my side. I often have the problem that the audio is super-low when the thing boots with all cables attached.

2 Likes
#26

@kveye + @kingmetal, this is likely related:

2 Likes
#27

For backing up any rpi based project, I use ApplePi-baker to make bit-wise backups of the sd cards. I know there was discussion of another program somewhere in the fates thread for a windows option.

#28

You can generate an image file from an SD card with Disk Utility on MacOS as well.

#29

docs updated!

params: https://monome.org/docs/norns/play/#parameters
tape: https://monome.org/docs/norns/play/#tape
soft reset: https://monome.org/docs/norns/play/#sleep

lmk if anythingā€™s missing from these usability docs ā€“ iā€™ll be starting a new thread/call-for-help to do study rewrites super soon!

16 Likes
#30

Is it just me, or are the sub headers a bit small? :sweat_smile:

Screen Shot 2020-03-25 at 10.01.15 AM
Screen Shot 2020-03-25 at 10.01.15 AM1348Ɨ736 37.2 KB

Great job on the docs btw! :grin:

1 Like
#31

that sweet, sweet fourth header size

not a very compelling formatting choice, for sure. lemme mock up some alt approaches, great call out!

2 Likes
#32

now that i see itā€” the only time H1 (single #) is used is in the page title.

so we should probably just upgrade all the headers to one level up. (i can do this in an automated fashion)

otherwise, if weā€™re hitting H4 that might mean we should have sub-pages? :slight_smile:

what do you think?

2 Likes
#33

I canā€™t speak to the code or the coders, but as a user I really appreciate the immediacy of navigation. One-level down of pages makes lots of sense (scripts that have lots of samples and settings take forever to scroll) but I think digging a rabbit hole could be exactly that.

2 Likes
#34

Oopsie: ā€œK3 on a separator jumps to next sectionā€

1 Like
#35

is there a way to save a global parameter as a temporary fix for now? i have to re-set my monitor and tape levels every time i open a script

#36

since updating my mixer settings get reset upon opening any script to make both monitor and tape levels = 0

#37

Havenā€™t really got the chance to play around with my Norns Shield since the update, but I really like that Tape now loops the audio file!

1 Like
Compass
#38

6 posts were merged into an existing topic: DIY monome compatible grid w/ Adafruit NeoTrellis

#40

Itā€™s possibly not lots of subpages, now I read it. But I think the params/mapping stuff could happily be a single page: thereā€™s a lot going on there, and it feels significantly different conceptually from, say, configuring the WiFi. But Iā€™m not sure every subsection there needs a page.

Of course, part of the complexity of breaking into pages is how thatā€™s presented/organised; the breaking is only one part.

1 Like
#43

The mix levels are also getting reset if i open a script, for instance molly the polly?
and i dont know if this is as intended but reverb on/off is also getting reset.

1 Like
#44

Exactly what Iā€™ve been experiencing today: parameters and mix levels arenā€™t saved when changing scripts or after turning the Norns back on (after a proper ā€œsleepā€). Also, when playing a loop in Tape, it goes silent when changing scriptsā€¦

Also, is it possible to choose the Tape to either loop or play once?

And one more noob question, as Iā€™m pretty new to this platform: is it possible to route Tape through the apps/scripts? Some of them (like bounds) do this already, but others doesnā€™t. I assume this requires changing the code? Would be cool if you could choose it on a system level.

#45

i noticed after the new update that i could save presets which would ā€œstick aroundā€ to be chosen againā€¦ but only if i stayed on the same script. when changing scripts i would lose all my presets.

edited to not be an idiot: thanks for the new OS!!! its really great, iā€™ve been enjoying it a lot!

#46

@tehn I am wondering if this is addressed in the param fixesā€¦

In parameters>map, I am seeing parameter names shown in the menu as the id and not name

Can confirm seeing this in Mangl and my Torii script.

1 Like
#47

see top post

these are the osc names

2 Likes