norns: update 230405 (hotfix 230614)

LLK · 2023-07-10T11:38:24.245Z

If you haven’t updated in a while, I just wanted to make sure you’ve made the critical update norns: new image 220306 which is necessary and requires an actual disk wipe, which is a quite cumbersome but nevertheless simple enough process, but after that you’re all good.

If you already have carry on and don’t mind my remark !

tobyclbain · 2023-07-10T11:48:00.557Z

Oh yeah that will almost certainly be my problem! Thanks for the help.

gnome666 · 2023-07-31T03:46:39.156Z

Been having an issue with old scripts ever since I updated to 230614. It only happens with certain scripts like lessconcepts, animator, mouse. When I load the scripts I get the initial splash screen but then the scripts seem to unload itself and i end up at the main page with it showing no script loaded, or script load error fail message. it only seems to be doing this with old scripts. newer scripts like dreamsequence seem to be fine. Awake seems to work fine too. Any thoughts on what the issue might be?

EDIT: Figured it out. I was working from a fresh disk image of norns so didnt have any of the old scripts loaded. All my scripts that didnt work required certain other scripts to work like molly the polly, passerbye, and the bangs. mystery solved

radioedit · 2023-07-31T04:56:49.155Z

Does the Maiden console show any error?

Lizards_Case · 2023-08-09T21:36:47.870Z

Really sorry for childish questions ( But - norns and MBP are on the same network, I can install scripts from a command prompt. But when going to SYSTEM>UPDATE on Norns it show “checking for update” forever. What have I missed ?

radioedit · 2023-08-10T05:56:55.483Z

Not a childish question at all! What version of Norns are you currently running?

Lizards_Case · 2023-08-11T21:17:52.779Z

Hmmm. I was on 220306. After multiple identical tries it could load and install the update. Will check if things are working.

Thanks !

LC

Interzonez · 2023-10-16T12:55:35.089Z

When I choose system update on my Shield, it just hangs on ‘checking for updates’.

Is there a way for me to upgrade from 22036 to 230526 without going this route?

Thanks!

Jensu · 2023-10-16T13:35:46.268Z

If your norns version is too old, it is not updatable through the systems menu, but see the instructions referenced here for a relatively easy fix: WiFi / update / files | monome/docs

Interzonez · 2023-10-17T05:06:09.058Z

Thanks for your reply, I have 220306 firmware installed, on a Norns Shield. From what i have read, the only way to update this particular version is through the system update on the device. I was wondering if there is another way, because system update doesn’t work, just hangs.

Jensu · 2023-10-17T06:55:01.087Z

I think that you should go for the same backup and reflash procedure as described in the link. Then you can be sure that you have the very newest version installed.

Interzonez · 2023-10-19T11:52:02.193Z

That’s my issue - I have 220306 and I’m using Norns Shield - I cannot flash the 230526 as it’s for regular Norns. And my Norns won’t update from System > Update - maybe network issues.

What I’d like then is to SSH into my Norns and maybe update from command line - or is there another way? Norns shield downloadable firmware latest is 220306 - if System Update is working would my Norns install a later version than the one at Github March 7 2022 ?

Ultimately I want to update to use the Concrete script which isn’t loading. Getting init errors.

Thanks!

zbs · 2023-10-19T12:11:12.048Z

have you tried on multiple wifi/wired networks, and have you done a full reboot?

Justmat · 2023-10-19T12:32:02.759Z

have you tried reaching out to monome for support? lines isn’t really a place to get direct help/product support, more just community discussion and advice. for direct support, reach out to: help@monome.org

Interzonez · 2023-10-19T14:05:43.887Z

Thanks. Monome don’t support the Shield. But thanks for the idea. I will look around and see what I can discover.

dani_derks · 2023-10-19T14:24:13.805Z

hihi, hope all’s well otherwise!

Interzonez:

Monome don’t support the Shield

just for clarification, we do fully support any shield we sold directly, and (to the best of our abilities) we try to be helpful whenever we’re contacted about other builds. that caveat is in place because, most often, folks run into trouble due to assembly issues which we simply can’t diagnose because we weren’t involved. but if there’s something we can help with, we always do

graymazes · 2023-10-19T21:46:34.822Z

Interzonez:

my Norns won’t update from System > Update - maybe network issues.

What I’d like then is to SSH into my Norns and maybe update from command line

you can run the update commands manually. of course it needs a working network connection!

here is the lua module running the update commands:

github.com

monome/norns/blob/main/lua/core/menu/update.lua

local m = {
  alt = false,
  install = "stable"
}

releases = {}
local VER = { "stable", "beta" }

local function checked() print("what??") end
local function get_update_2() end

local function check_newest()
  print("checking for update")
  if m.alt then print("stable and beta") end
  norns.system_cmd( [[curl -s \
      https://raw.githubusercontent.com/monome/norns/main/releases.txt \
      ]],
      checked)
end

This file has been truncated. show original

in the abstract, the steps consist of:

run wget to fetch the release archive and checksum (listed at https://raw.githubusercontent.com/monome/norns/main/releases.txt)
verify and unpack to /home/we/norns/update/
run /home/we/norns/update/update.sh

same steps, but at least you will be able to see errors. there could be something unforseen with that particular version jump.

tehn · 2023-10-19T22:21:14.027Z

open maiden, paste the errors you see when it hangs

Interzonez · 2023-10-20T04:26:46.156Z

Thanks for these instructions. So I could download the update on a PC, then SMB or SCP the files and folders over to the Shield and then run the update.sh from there?

Trouble I have with Wifi is a network where username and password are required… Norns only asks for password for regular Wifi connection… So… if i can just use another machine and download that would be easier.

tehn · 2023-10-20T11:27:43.915Z

Interzonez:

Trouble I have with Wifi is a network where username and password are required… Norns only asks for password for regular Wifi connection

this is the most relevant information provided so far, from which we can infer that you’re not actually connected to a network.

network connectivity is essential to get anything out of this system, so that should be addressed first. your options are:

change your network so it doesn’t require a login, or use a different network
use an ethernet cable to connect to your network

alternatively, you could go visit a more standard network, do the update, get a few scripts, and then connect to your computer via hotspot mode for manual file transfers.