norns: update 230405 (hotfix 230614)

radioedit · 2023-07-31T04:56:49.155Z

Does the Maiden console show any error?

Lizards_Case · 2023-08-09T21:36:47.870Z

Really sorry for childish questions ( But - norns and MBP are on the same network, I can install scripts from a command prompt. But when going to SYSTEM>UPDATE on Norns it show “checking for update” forever. What have I missed ?

radioedit · 2023-08-10T05:56:55.483Z

Not a childish question at all! What version of Norns are you currently running?

Lizards_Case · 2023-08-11T21:17:52.779Z

Hmmm. I was on 220306. After multiple identical tries it could load and install the update. Will check if things are working.

Thanks !

LC

Interzonez · 2023-10-16T12:55:35.089Z

When I choose system update on my Shield, it just hangs on ‘checking for updates’.

Is there a way for me to upgrade from 22036 to 230526 without going this route?

Thanks!

Jensu · 2023-10-16T13:35:46.268Z

If your norns version is too old, it is not updatable through the systems menu, but see the instructions referenced here for a relatively easy fix: WiFi / update / files | monome/docs

Interzonez · 2023-10-17T05:06:09.058Z

Thanks for your reply, I have 220306 firmware installed, on a Norns Shield. From what i have read, the only way to update this particular version is through the system update on the device. I was wondering if there is another way, because system update doesn’t work, just hangs.

Jensu · 2023-10-17T06:55:01.087Z

I think that you should go for the same backup and reflash procedure as described in the link. Then you can be sure that you have the very newest version installed.

Interzonez · 2023-10-19T11:52:02.193Z

That’s my issue - I have 220306 and I’m using Norns Shield - I cannot flash the 230526 as it’s for regular Norns. And my Norns won’t update from System > Update - maybe network issues.

What I’d like then is to SSH into my Norns and maybe update from command line - or is there another way? Norns shield downloadable firmware latest is 220306 - if System Update is working would my Norns install a later version than the one at Github March 7 2022 ?

Ultimately I want to update to use the Concrete script which isn’t loading. Getting init errors.

Thanks!

zbs · 2023-10-19T12:11:12.048Z

have you tried on multiple wifi/wired networks, and have you done a full reboot?

Justmat · 2023-10-19T12:32:02.759Z

have you tried reaching out to monome for support? lines isn’t really a place to get direct help/product support, more just community discussion and advice. for direct support, reach out to: help@monome.org

Interzonez · 2023-10-19T14:05:43.887Z

Thanks. Monome don’t support the Shield. But thanks for the idea. I will look around and see what I can discover.

dani_derks · 2023-10-19T14:24:13.805Z

hihi, hope all’s well otherwise!

Interzonez:

Monome don’t support the Shield

just for clarification, we do fully support any shield we sold directly, and (to the best of our abilities) we try to be helpful whenever we’re contacted about other builds. that caveat is in place because, most often, folks run into trouble due to assembly issues which we simply can’t diagnose because we weren’t involved. but if there’s something we can help with, we always do

graymazes · 2023-10-19T21:46:34.822Z

Interzonez:

my Norns won’t update from System > Update - maybe network issues.

What I’d like then is to SSH into my Norns and maybe update from command line

you can run the update commands manually. of course it needs a working network connection!

here is the lua module running the update commands:

github.com

monome/norns/blob/main/lua/core/menu/update.lua

local m = {
  alt = false,
  install = "stable"
}

releases = {}
local VER = { "stable", "beta" }

local function checked() print("what??") end
local function get_update_2() end

local function check_newest()
  print("checking for update")
  if m.alt then print("stable and beta") end
  norns.system_cmd( [[curl -s \
      https://raw.githubusercontent.com/monome/norns/main/releases.txt \
      ]],
      checked)
end

This file has been truncated. show original

in the abstract, the steps consist of:

run wget to fetch the release archive and checksum (listed at https://raw.githubusercontent.com/monome/norns/main/releases.txt)
verify and unpack to /home/we/norns/update/
run /home/we/norns/update/update.sh

same steps, but at least you will be able to see errors. there could be something unforseen with that particular version jump.

tehn · 2023-10-19T22:21:14.027Z

open maiden, paste the errors you see when it hangs

Interzonez · 2023-10-20T04:26:46.156Z

Thanks for these instructions. So I could download the update on a PC, then SMB or SCP the files and folders over to the Shield and then run the update.sh from there?

Trouble I have with Wifi is a network where username and password are required… Norns only asks for password for regular Wifi connection… So… if i can just use another machine and download that would be easier.

tehn · 2023-10-20T11:27:43.915Z

Interzonez:

Trouble I have with Wifi is a network where username and password are required… Norns only asks for password for regular Wifi connection

this is the most relevant information provided so far, from which we can infer that you’re not actually connected to a network.

network connectivity is essential to get anything out of this system, so that should be addressed first. your options are:

change your network so it doesn’t require a login, or use a different network
use an ethernet cable to connect to your network

alternatively, you could go visit a more standard network, do the update, get a few scripts, and then connect to your computer via hotspot mode for manual file transfers.

Interzonez · 2023-10-20T12:07:32.960Z

It’s even more complicated than that.

I’m in China. GitHub is blocked. At work I use company VPN but the network requires user plus password. At home I can connect Norns to broadband router but it’s not got a VPN on it - the VPN is on iPhone and MacBook. When trying iPhone as hotspot it doesn’t work - probably not very strong connection.

So… I think by the looks of the Lua file I could download the compressed files first locally - to the Norns. Change the paths. And have it run the entire update process locally and not call out to GitHub. Would that work?

tehn · 2023-10-20T16:24:45.138Z

oh wow, yes, ok!

manual steps then (slightly adapted from above):

acquire, somehow, this file: https://github.com/monome/norns/releases/download/v2.7.7/norns230614.tgz
connect to your norns, somehow, either via hotspot or ethernet. copy this file above to /home/we/update/ (you may need to make this folder)
log in via SSH (instruction in docs) then

cd ~/update/
tar xzvf norns230614.tgz
cd 2303614
./update.sh

restart the device

you’ll be updated!

Interzonez · 2023-10-21T05:06:26.793Z

Thanks, that’s what I did and it worked! I even went through the update.sh line by line lol.

Then my challenge - as it seems is going to be regular - is that a lot of .lua scripts call on github repositories. I installed Tapedeck and Amenbreaks - discovered issues of this type, solved by doing the same thing, copying down from Github files or .tgz and altering the .lua file to find them locally. Not exactly plug and play, but it works.

Anyway, got those scripts working. Sadly, I am still unable to get Concrete working. Different issue I know… will sleuth and see if I can get to the bottom of it:

# script clear
# script load: /home/we/dust/code/concrete/concrete.lua
# script run
>> reading PMAP /home/we/dust/data/concrete/concrete.pmap
m.read: /home/we/dust/data/concrete/concrete.pmap not read.
Engine.register_commands; count: 0
___ engine commands ___
___ polls ___
amp_in_l
amp_in_r
amp_out_l
amp_out_r
cpu_avg
cpu_peak
pitch_in_l
pitch_in_r
# script init
### SCRIPT ERROR: init
/home/we/norns/lua/core/paramset.lua:187: attempt to perform arithmetic on a string value (field 'group')
stack traceback:
	/home/we/norns/lua/core/norns.lua:146: in metamethod '__sub'
	/home/we/norns/lua/core/paramset.lua:187: in function 'core/paramset.add'
	/home/we/norns/lua/core/paramset.lua:213: in function 'core/paramset.add_option'
	/home/we/dust/code/concrete/concrete.lua:1364: in global 'init'
	/home/we/norns/lua/core/script.lua:126: in function 'core/script.init'
	[C]: in function 'xpcall'
	/home/we/norns/lua/core/norns.lua:147: in field 'try'
	/home/we/norns/lua/core/engine.lua:91: in function </home/we/norns/lua/core/engine.lua:89>