#125

just pushed a small update that renames the input and engine level params to sc input level and sc engine level. also fixed the softcut filter code.

3 Likes
#126

update v1.3

  • adds sample and hold lfo shape! (Many thanks to @crim for coding it!)
13 Likes
#127

Hi @Justmat, I hadn’t a clue what exactly norns/fates can do when buying it. But this patch is exactly what I what.

For my understanding, if there is nothing in the buffer and I hit rec (which was off) play something and hit rec again this will not set the loop length (loop end), right? Or is the loop end just not updating?

Thanks for all the work on this and other patches.

2 Likes
#128

right, loop end and rec are separate in otis. The way rec works is that, any time rec is on new sound is being added to the buffer/loop and older sounds are fading away according to the feedback settings.

turning rec off holds the buffer, stopping both new material from being recorded, and old things from fading away.

3 Likes
#129

Okay, now I understand, thanks.

This forces me to work differently with that, which is great. I’m used to a normal looper. But I like speed control very much. I will play with it more in the next days for sure.

1 Like
#130

Yeah, in use It works much more like two tape loops than like a traditional looper. If you like the traditional style, be sure to check out reels! it’s a really cool looper script :slight_smile:

2 Likes
#131

A quick little sketch built upon a looping bed done with Otis.

6 Likes
#132

I just downloaded the newest Norns update and Otis isn’t working. I keep getting the error: int message back on the main menu page. I’m very new to Norns and have never had Otis working, so it’s not like it just broke for me. I’ve installed a bunch of new apps using Maiden and they all work, save for Otis.

Anyone else having this problem? As per tehn’s instructions I, I’ve forced a new update despite Norn’s saying it’s already up to date. I’ve also uninstalled and reinstalled a few times.

#133

Hey there! Yep, can reproduce here. Looks like it’s throwing an error with some core norns stuff.

Maiden Readout

script load: /home/we/dust/code/otis/otis.lua

cleanup

script clear

including /home/we/dust/code/otis/lib/tlps.lua

including /home/we/dust/code/otis/lib/hnds.lua

pset >> write: /home/we/dust/data/system.pset

script run

loading engine: Decimator

Engine.register_commands; count: 2

___ engine commands ___

sdepth f

srate i

___ polls ___

amp_in_l

amp_in_r

amp_out_l

amp_out_r

cpu_avg

cpu_peak

pitch_in_l

pitch_in_r

script init

SCRIPT ERROR: init

/home/we/dust/code/otis/lib/tlps.lua:97: attempt to call a nil value (field ‘post_filter_fc_mod’)

stack traceback:

/home/we/norns/lua/core/norns.lua:126: in field ‘post_filter_fc_mod’

/home/we/dust/code/otis/lib/tlps.lua:97: in field ‘init’

/home/we/dust/code/otis/otis.lua:239: in global ‘init’

/home/we/norns/lua/core/script.lua:93: in function ‘core/script.init’

[C]: in function ‘xpcall’

/home/we/norns/lua/core/norns.lua:127: in field ‘try’

/home/we/norns/lua/core/engine.lua:91: in function </home/we/norns/lua/core/engine.lua:89>

reading PMAP /home/we/dust/data/otis/otis.pmap

#134

I will check into this today! Sorry for the troubles. Does this occur with other Softcut scripts, or is it just otis?

#135

this is in fact working (i think?)

what you need to do is re-run the 200129 update by holding K1 while executing SYSTEM > UPDATE

#136

Still broken for me. I made a more detailed response in the help thread

#137

totally trivial fix but i did open a PR. if anyone needs the change immediately!

1 Like
#138

PR merged. Update Otis for the fix! Thanks @zebra :partying_face:

4 Likes
#139

Hi! Just starting along with Norns and so far Otis is the most immediately useable and lovely script I have found. Thank you x1000 to the developers!

I have a few questions:
1 - Am I correct in assuming that SC Input and SC Engine don’t do anything?
2 - Is it possible to have Otis running at the same time as other scripts?
3 - what does write buffers to tape do? Saves the buffer to the internal storage?
4 - what do speed and pan slew do?
5 - on the main menu to the far left (??) what does “enq” do? And is “cut” just the master filter? And “tp”. does this stand for tape? And if so, what does this do?

That’s more than a few questions. I’ve tried to look for answers in the thread, so please forgive me if I my questions seem obvious.

Thanks in advance for your help!

3 Likes
#140

Question 1: not sure which page you’re seeing this so I can’t really help.
Q
2: Combos
Otis can be combined with some other scripts! @Justmat has done so already here, take a look at the script in maiden to see how.
3: yes!
4: these will slew/smooth the rate at which these parameters change.
5: these are the norns mixer page, “eng” is engine level, “cut” is softcut (a multi head delay that can be implemented in many ways depending on the script), “tp” is tape. Tape playback allows you to record audio files and play them back simultaneously to using scripts.

1 Like
#141

Thanks for your reply!
Q1 was referring the main menu page farthest to the right. It has all the available parameters of Otis in a list~
Q2 Wonderful! Gotta get a Grid at some point then - and learn how to read scripts~~~
Q3,4,5 Excellent! That’s all very clear.

I appreciate you taking the time to reply!

#142

In otis the sc input level and sc engine level parameters are to set the volume of input to softcut. I will try to write up a more detailed description of all the parameters and add it to the top post here. tbh, most of my script docs could likely use some love :sweat_smile:

1 Like
#143

Thank you for clarifying that! I really appreciate it~~
And despite the above questions, I really love the script. It has made my first few weeks with Norns a true pleasure. Thank you!!

2 Likes
#144

otis :dog2: gloops :poop:

really love the decimator ugen + softcut combo

6 Likes