vals
8020
20 chars of
neat & handy!
2 Likes
I’m fascinated by large modular systems that have cable runs that are permanently (and neatly) patched like this. Really curious what (if anything) you keep patched in this setup.
7 Likes
pelang
8022
it’s a 5 x 3 channel stereo matrix (addac 807) where 4 channels have a band isolator. Channel 5 is for external inputs
There are two 4ms tapo delay with each having a fixed filter bank before.
Channel 1: 4ms ENOSC / glou-glou loupe (padel)
Channel 2: 4ms ENOSC / make noise morphogene
Channel 3: 4ms Tapo / Miso cornflakes
Channel 4: 4ms Tapo / Addac 112 granular
Each channel is as well routed as mono to a 6x6 pin matrix for fx
The large knobs are for the 4 band isolators / the mia’s for modulation inputs
Modulation routing is temporarily patched
My goal is to learn a few modules very well and keep the system simple 
8 Likes
Obolus
8023
It’s filthy. Even by itself, when you sit down you can expect to spend hours just on the FM and filter stuff. I sold my Digitakt a couple of years ago, but I am considering getting one again to play with this.
I am not where I want to be when it comes to filming my set up, except for phone recordings. But I will see what I can put together.
1 Like
Here’s my modular corner. I’ve posted pics of the individual instruments before, this is how they are set up in use. The bigger of the two instruments is my personal “Best of Euro” with lots of mods and refinements to make it feel cohesive and consistent. The smaller one turned out to be an ode to some key modular makers, namely Serge, Hordijk, Haible, and P. Schreiber. The Pod next to the 0-CTRL hosts the good old Phonogene, which will soon be replaced with my first and only Mutable modules, Beads and Shades.
24 Likes
English countryside, for first time in a few years. Birds more vocal than I remember?
14 Likes
xmacex
8027
Dub organizer at the controls. Løl.
15 Likes
Would you mind talking about that top row in the euro case - is it DIY?
fyoosh
8029
I needed a tuner so went with the smallest one I could find with a mic and 3.5mm input. Turns out there’s a magnet along the top edge so it can nicely clonk onto your modular.
25 Likes
i use the same recorder. any tricks or tips? 
Watch Dave Mech’s field recording videos, and don’t eat foxgloves, but that’s about it, I’m afraid.
6 Likes
A piece of string inside a wine box. Musical exploration fun.
40 Likes
It’s a mix of commercial and DIY modules in unified panel. Here’s some info that I shared after posting about the individual instrument: Show us your modular system - #2431 by listentoaheartbeat
1 Like
timp
8034
Ether just arrived so I am comparing it with the Elektrosluch 3+
Ether feels like it has some heavy AGC?
(I usually miss out with LOMs lack of a wait-list, but lucked in when they randomly had a pair of Elektrouši in stock - “passive electromagnetic sensors. You can plug them to your Elektrosluch 2, Elektrosluch 3 or Elektrosluch 3+ for extended range of sensing or use them with portable recorders.”
I’ll do a test and compare the results recording with [Elektrouši > Elektrosluch 3+ > MixPre] and [Elektrouši > MixPre]
5 Likes
_marimo
8035
Okay, I must ask: what type of camera are you using? This photo captures the moment perfectly
Just noticed the “Montepulciano, Tuscana” on the box. Yum! Loved all the wines I had there back in 2018.
Around my desk these days…
49 Likes
renegog
8038
almost a black and white photo 
is that lens distortion or did you switch out knobs on the make noise stuff?
2 Likes
Yeah… I have this particular problem: I switch knobs for living. 
Edit: for survive…
5 Likes
