//// pictures of our sound-making machines ////

[setfield]

If only they made one that covered the shortwave bands.

[setfield]

My rig. And ZuZu (ズズ).

[bmoren]

Sometimes you need an afternoon of the effortless combo of marbles into rings into clouds with perfect northern low angle sun beaming through the window

[setfield]

So cool! Unfortunately most of the bands are a shadow of what they once were. There’s still a wicked bunch of weird noises out there.

[fbusche]

What case is that???

[bmoren]

Home made, more details over in the cases thread:

Eurorack cases/racks/stands. Ask questions, share experiences

Put together my new 6U 48hp case this weekend. I was trying to lasercut 1/4" ply, but the laser cutter had other ideas. So– I ended up making a mitered 1/2" Baltic Birch ply case. 4ms bus boards + a row power moved from my other case to cap it off. I could have gotten away with one bus board, but I figured, I’ve got it, might as well make it convenient to get power going. [IMG_2639] [IMG_2640]

Eurorack cases/racks/stands. Ask questions, share experiences

The whole construction uses mitered joints. To make those mitered joints I ripped the bottom and sides at 45º on a table saw and also cut the sides sides at 45º saw before gluing. As for the rounded corners, this is just sanding with an orbital sander with 80 or 150grit to smooth over after gluing. It’s really a way to hide my slightly mis-measured miter cuts. Finish procedure is 150grit sanding, coat of wipe on poly, 220grit sanding, coat of wipe on poly, 220grit sanding, final coat of wipe …

Eurorack cases/racks/stands. Ask questions, share experiences

I ended up building a lid that is just deep enough to cover knobs and latch on for my ply case. Thought folks here might be interested in the update. so far I’m loving this form factor 6U 48hp is just a beautiful balance between restriction/focus and having enough tools to make some fairly complex things. I’ll be interested to see how things change with the ansible on the way to compliment my fresh grid! [IMG_3024] [IMG_3023] [IMG_3025] [IMG_3026] I do reccomend for anyone getting started or j…

[abalone]

building VCV Rack linux

[AlessandroBonino]

My wife is out for a few days so the motto is OCCUPY THE LIVING ROOM

[Catchthehare]

Latest addition to the collection. I’m so in love with this machine. It’s practically flawless, and sounds divine.

[philmaguire]

What’s that black module, bottom right? Something Verbos?

[AlessandroBonino]

It’s just a DIY Plaits with Rogan knobs!

[kveye]

Not that one, in the bottom row

[bloc]

Yeah i think it is. It’s the blue lantern version of plaits.
https://modularaddict.com/bluelantern-plaits-pcbpanel

[kveye]

Indeed, pretty radical difference in panels

[bloc]

Yeah it’s kind of inverted with the knobs.
I actualy hope some will eventualy make a inverted version of stages so that every slider and button are on the bottom and jacks at the top (knobs in the middle). This way the sliders are much more reachable if you have stages in a bottom row… well i always think of cable efficiency don’t mind my rambling. Stages is a great module anyway

[simonvanderveldt]

It would be so nice if modules would be available in two variations or with a 180 degree rotatable design (there are some modules that do support this) to allow one to have the jacks at the bottom or at the top.
I’d really like to have all the modules in my bottom row to have the jacks at the top, but the products are just not there unfortunately.

[robotboot]

My digital and organic sound making devices. Loving the combination.

[n-So]

welcome to the Nagra 3 club!

[Catchthehare]

Thanks pal, it’s an honour

[fbusche]

I have two organic sound making devices myself and one recently has just been moving around the house going “wcheeeeoooowcheeeeoooowcheeeoooow” and I’m thinking in my head “LFO into filter cutoff”