#1689

IMG_5682
IMG_5682.JPG2995×2414 989 KB

dawn of a new era for me

42 Likes
#1690

IMG_4889
IMG_4889.JPG2392×2392 1.49 MB

36 Likes
#1691

My first thought was that the piece in the front was a orgon systems enigiser… But it’s not right? Clean looking setup anyhow :slight_smile:

#1692

I guess it’s a Serge system :slight_smile:

1 Like
#1693

Correct! It’s an old setup of mine before moving abroad; Serge STPS and TTSH, built by The Human Comparator (www.thehumancomparator.net)

2 Likes
#1694

IMG_5249
IMG_5249.JPG3264×2448 1.95 MB

Sat on my desk, doing something generative.

12 Likes
#1695

Hey that’s a cool case, did you make it? I like 7U format, which leaves the center 1U for utility stuff.

#1696

I didn’t make it, but I had it made. Long story. (My previous case was homemade, and was 7U84.)

I am fond of 1U as a spice-rack in the middle - I sell 1U kits myself - and am interested in trying to do a few more things in that format than is customary. (90% of that row is made by myself - the commercial modules are at the left, and the rest is prototypes, three of which are inches from release. There’s also a 1U Plitka Trace oscilloscope in there. Functions going on in that row include clocking, an LFO, gate-to-trigger conversion, a couple of attenuverters, a headphone amp, a contact mic amp, a sample-and-hold with built-in noise source, and a slightly janky CV bus that needs work…

4 Likes
#1697

Snap! (Almost)

image
image.jpg4032×3024 2.49 MB

9 Likes
#1698

Can you tell me what case that is? And for Bonus Points, the power?

:slight_smile:

Thank you!

#1699

its a frap tools plus case. 2 rows of 168 hp. i am powering it using 2 tiptop power modules (forget the name off the top of my head) and for the battery power i am using a ravpower charger. which will power this system for about 2 hours. the case is awesome, but very thin so you have to be very aware of depth. i think it is 44mm. and also the power connectors can get pretty crowded too. this fits (snugly) into a pelican knock-off case i found on amazon.

3 Likes
#1700

Sorry, forgot to reply. Yes, only the MG into the Moisturizer, and then in the delay and Strymon reverb. The MG is real fun. I like to assign the same sound to all the keys, and assign different settings to each one. So it’s cohesive and wicked at the same time :slight_smile:

3 Likes
#1701

┬┴┬┴┤_･)├┬┴┬┴

34 1
2017-09-05 12.03.34 1.jpg2592×1728 2.21 MB

26 Likes
#1702

new home

IMG_2759
IMG_2759.JPG3988×2992 1.78 MB

62 Likes
#1703

jango&studio010
jango&studio010.jpg2000×2000 2.67 MB

A blurry bedroom jam setup from daze past…on the cusp of a new dedicated space and so wish my old room of almost 20 years goodbye. Shot on medium format film degraded due to heat sadly.

15 Likes
#1704

IMG_9157
IMG_9157.jpg3264×2448 1.39 MB

IMG_9160
IMG_9160.jpg3264×2448 1.65 MB

20 Likes
#1705

Cool, is that CV enabled guitar pedal?

#1706

Yeah, it is a “eurorack” version of one of their guitar pedals, with the added cv inputs and 1/8" connectors. they also make a module version of this.

http://www.rmlfx.com

1 Like
#1707

My friend Dave Bundy got the module version and he says it’s stunning.

2 Likes
#1708

IMG_5783
IMG_5783.JPG2917×2448 1.12 MB

feeding just type pellets into supercollider

18 Likes