#59

I also have this IKEA Eneby and I am satisfied.
Good battery and nice sound overall.
https://www.ikea.com/gb/en/p/eneby-bluetooth-speaker-black-90357632/

2 Likes
#60

I’m sure you know but just in case. You can run the Minirig 3 in high gain and low gain mode, bright LED and dimmer LED. In high gain the maximum volume is louder but the sound quality is worse.

I love the sound quality of them but the iOS app is absolutely abysmal and 9 times out of 10 doesn’t work the way it’s intended. Pairing two of the speakers for stereo sounds wonderful when they connect but again that is hit and miss.

2 Likes
#61

Not a recommendation as I haven’t tried them, but I don’t see cheap dual wireless speakers popping up very often.

https://www.8bitdo.com/twincube-speakers/

60 USD. They have 3.5mm aux input.

2 Likes
#62

There was just a MiniRig update that promises to improve pairing issues. So far I’ve had better luck pairing stereo with this update.

1 Like
#63

Are you using iOS? I haven’t been able to use the MINIRIG app or Updater app since iOS13 was released.

Pretty poor form from MINIRIG developers seeing as the iOS13 beta has been available since June. I love how the speakers sound but I don’t think I’ve ever used software as frustrating and buggy as the MINIRIG apps.

1 Like
#64

Here’s the thing. I am using iOS. But it won’t work from my iPhone only from my iPad. And I hear you on the app support. These speakers sound so great and the battery lasts so long - but so many hassles with apps and pairing.

#65

If you’ve been wanting a minirig sub the new 40W subs just came back in stock on their site.

#66

As another data point, I’ve had no problems on ios13 and the minirig app and update.

1 Like
#67

After much perseverance, I finally managed to get the speakers to show up in the app and was able to update them. Right now I’m wishing I hadn’t though, as I’ve now got a new issue with stereo. The left speaker intermittently drops out causing a kind of pan effect and volume drop before it kicks back in. Is this happening with you guys too?

They also released an iOS update for the app today, which has completely broken the settings page :man_facepalming:t2:

#68

I will sometimes get the drop out on one side that you describe not long after pairing, but generally they’ve been pretty solid once I get them going. By left do you mean the primary speaker (i.e. the one that’s paired with your music source)? The one I get drop outs on is not the one paired with my music source.

#69

Le bump…

I’m considering a cheap and lightweight speaker to use with norns when traveling. So - it should have an AUX input. Size/weight is probably a bit more important than quality overall.

There’s a few $20-40 units on amazon which seem like cheap enough to try:
Anker Soundcore
Amazon Basics Portable Wireless Speaker
Sony XB-10 or XB-12

any opinions on these el cheapo options?

#70

I’ve been using the Anker Soundcore for quite awhile. Sound is good for the size and the battery life is quite unbelievable.

2 Likes
#71

my mk4.5 just shipped! i plan to start a synth jam in the park Meetup with it :hugs:

1 Like
#72

I don’t know about the ones mentioned. I bought a JBL Go 2. It’s cheap, small, very portable, “weather proof”, aux-in and sounds reasonably good for what it is. Perfect for me to hook up my Op-1, or phone when travelling etc. I didn’t really make any research before the purchase. Bonus: I plan to use it as a “grotbox” mono monitor when mixing.

#73

Thinking of getting the improved Minirig Mini2 for a bedroom or office set up. Low level listening only. Would you agree im ok with Mini2 or is the Minirig 3 a better option?

1 Like
#74

Another option to consider is the Ikea Frekvens with the optional Braunit battery pack. (It seems opinions on this are a bit more negative than I thought)

1 Like
#75

I recommend the normal size jambox by jawbone, 2nd hand for cheap. it has a boombox style sound, good frequency range. not very even, the mids distort but pleasantly it has character. distortion is going to happen with volume on the speakers of this size, this one sounds good slightly distorted.

2 Likes
#76

Anybody here owns a DemerBox? https://demerbox.com/ Curious about the sound quality. I love that you can use it as a case for your Norns too.

1 Like
#77

I have just bought a Marshall Stockwell II Bluetooth speaker, and I’m really liking it. One question I can’t find the answer to though, is when I connect it to my iPad what volume should I set the iPad to. I’m assuming that as it is streaming over Bluetooth 5.0 the signal is being sent digitally, so I should set the iPad’s volume to 100%, and set the speakers volume to taste. Is this right? If I was connecting via the 3.5mm aux input, it’s analog, so I’d set the iPad’s volume to about 70%, but I’m unsure how the Bluetooth 5.0 spec deals with source volume.

#78

What did you end up with? Currently considering options and would like to hear your experiences.