#46

Listened to this at work today and I must say, you crafted a beautiful narrative here.
Very enthralled with the animalistic sounds that emerged on Klingt.
Will pick up on the next Bandcamp day :slight_smile:

#47

hey all, after years of trying to get ppooll to work on windows with no luck, it was great to have it work on my iMac

I have ppooll running on Mojave 10.14.6, max 8.1.3, but I’m not sure which version of ppooll is happening. Any one know how to check that?

edit: so after messing around a bit, some acts seemed to not be working, so I updated to the newest version of ppooll and max and everything seems to be working now, gotta say though, the routing is not the most intuitive, but I’m getting there

#48

I got this message when installing after doing a plugin scan.

An apparent security function in recent OS that flags downloads from the internet automatically.

Try scanning for Plugins and see if you get the pop up. After I clicked OK, it seems to work fine. Although I haven’t gone too deep into actually using it.

Screen Shot 2020-11-28 at 2.09.58 PM

#49

You are killing it with these posts! I remember messing around in lloopp a couple years back and loving it. Got distracted with mods and hacks in hardware and no input mixer stuff for a bit but now looking to get back. Many thanks!

#50

Got lloopp running on OSX 10.3 now. Runs a bit better than on OS9. Which means it crashes, but at least it doesn’t freeze the entire laptop. I would like the get a version of ppooll that features the spectral objects. It did in Max 6.

#51

Had this same problem with Max 8.1.2 on Windows 10 and I think I’ve managed to solve this by downloading the external separately from https://web.archive.org/web/20190913190815/http://ppooll.klingt.org/index.php/max_externals (had to use wayback machine, the page is empty since the last update apparently) and replacing the previous one - ll_number.mxe64 - on Max 8\Packages\ppooll\externals\filip. Hope it helps.

2 Likes
#52

made myself a lines account just to thank you. you’re a legend!

#53

YES! thank you! this fixed it!

#54

sorry for the delay, got sick the past month but saw it through! I can confirm Max 8 and the ppooll host successfully running now that I moved it to Packages! excited to start playing around with it more, so far gg.rainer is just as fun as I expected. want to dive more into delayloops as that one is proving a bit tricky.

#55

Using ppooll quiet a lot! Especially the beast feedback act and the kk.rainer.
Here a example where I used beast for a project I do with Maotik.
Erratic Weather

2 Likes
#56

anyone using ppooll ver 8.2 and know how to route audio in from an audio interface? the tutorials i’ve been watching have used an act called INa, which i am not seeing in 8.2. there’s an INmulti but doesn’t seem to have the same function.

#57

try using buffub - you can pass audio through without needing to record.

#58

If I install the Max Runtime 6 will Ppooll work on my older MacBook Pro?

#59

perfect, that worked

1 Like
#60

Hi all,

I’m new to ppooll and I’ve wanted to get into it mainly for its granular capabilities. Upon messing with gg.rainer, I can’t seem to select any file to play. The are where you usually select a file is greyed out, I’ve attatched photos of how it looks. I’m on the newest version of both max and ppooll on a Macbook pro with Big Sur 11.1. I’ve seen other threads with similar issues with the two plugins that were solved with the 8.2 update… unfortunatley the one I’m using. I could be a total idiot… let me know. Thanks in advance.

Screen Shot 2021-01-18 at 5.51.38 PM
Screen Shot 2021-01-18 at 5.51.38 PM638×546 39.7 KB

#61

its definitely confusing. use the buffer_host act to load samples that will show up in that window of gg.rainer. click on the bottom left of buffer_host > samplebuffers to create an empty buffer and use the buffub act to record live audio into gg.rainer

2 Likes
#62

Hi All (this is my first post searching for help on PPOOLL). I’m so excited about getting into PPOOLL, and i’m super grateful for the availability of it . I’ve used Max a bit, but i’m still just getting my head around it really.
Anyway, i’m not getting acts to work in PPOOLL at all. For example, if i set up an instance of Hardplay or gg.rainer it sends out to ho_st fine. However, if i try to route it to freeverb (for example) and route freeverb to ho_st I get nothing. Also, I don’t seem to have MixL and MixR available - not sure whats going on? (screenshot attached)
Really, really appreciate anyone’s help on this - please :slight_smile:

Screen Shot 2021-01-20 at 11.04.10
Screen Shot 2021-01-20 at 11.04.101228×436 185 KB

#63

hi!
i’m not an expert, but know some basics :slight_smile:
in your example in hardplay you have to choose input of freeverb, at screenshot there’s ‘-no-’ input.

1 Like
#64

Thanks so much for taking the time! I really appreciate that, and seems so simple now.

#65

Hey, thanks so much for the reply - really appreciate it