Reaktor thread

trickyflemming · 2022-01-13T15:01:47.139Z

Yep, good eye! I wrote the Rungler Block that it’s based on. The hardware Rungler only uses the three most significant bits, unlike the similar Turing Machine that uses all eight.

hermbot · 2022-01-13T15:54:09.002Z

Thanks for the tip, I will check it out tonight and see where I bungled the rungle.

Ithacus · 2022-01-19T11:33:18.167Z

I just got a Dreadbox Nymphes (sounds great… fantastic value for the money really).

Unfortunately I am finding the interface a little finicky (and this is no slight on Dreadbox; I understand compromises had to be made to meet the low price).

Not having the amp envelope on the same page as the other main parameters is the big gripe that I have.

So… I started working on a Nymphes Reaktor Midi Editor (not proficient enough with M4L to come up with anything quickly).

I’ve tried to make it appealing to use with the GUI as a lot of h/w synth midi editor plugins I’ve used in the past looked a bit

Additions (that will hopefully all pan out ok… still patching and testing at the moment):

Amp Envelope+Filter envelope link (so the amp envelope controls in Reaktor also send CC’s for the filter envelope). I find single envelope synths much easier to work with when first creating a patch.
HPF link button. So the LPF control in Reaktor also sends CC for HPF to Nymphes (for easy pseudo band-pass type tones).

If anyone has interest in this, and has any ideas for some other simple additions let me know and I’ll see what I can do.

Should be available soon in the Reaktor UL

image1081×324 49.3 KB

seqsual · 2022-01-22T20:02:37.663Z

Interesting, I hope the reason behind this “limitation” was Mr Hordijk’s laziness rather than some rational theory.

mattkuebrich · 2022-01-24T16:14:10.943Z

From what I’ve read, the propagation delay caused by using only the last 3 bits of an 8-bit shift register helps introduce more chaos into the rungler.

Ithacus · 2022-07-05T10:06:27.822Z

Started creating a series of ‘uRack’ effects devices for the Reaktor UL as a bit of evening entertainment.

The first devices are a mix of the factory library ‘studio effects’ devices, with some changes and modifications:

I’ve just uploaded another new device, using Michael Hetrick’s ‘Tape Style Delay’ Block as the basis for a Variable Sample Rate delay… Primetime style octave/fifth shifts and freeze effects.

Thought you guys might find them fun and could find use for them in your own .ens

I’m enjoying working on these little devices so will probably add more when I get time.

Find them here:
Digilogix uRack FX (80’s Series) v1.1 | Entry | Reaktor User Library (native-instruments.com)

Quru · 2022-07-05T10:57:56.925Z

Very cool and feels positively very early 00’s to me. Reminds me of the times I got into music software, although it perhaps sounds a lot better than what I was using at the time but well memories grow sweeter with time.

Prof_lofi · 2022-07-05T22:11:05.832Z

Really curious about these but away from my computer - did you patch them in core or primary? I’ve been wanting to get into core (again, seems like an 18 month regular itch I get).

They look great btw!

Ithacus · 2022-07-06T12:21:01.058Z

Quru:

Very cool and feels positively very early 00’s to me. Reminds me of the times I got into music software, although it perhaps sounds a lot better than what I was using at the time but well memories grow sweeter with time.

Yeah I have to say I kind of wish it was possible to run a copy of ol’ Reason 2.5… that was my first ‘real’ piece of music software (saved up for ages to buy it). I loved the fun aspect of it… and I guess the simplicity (not too mention skeuomorphism for someone who had no chance at the time of owning a real studio setup ).

I tried Reason again recently and it’s all a bit of a mess really… multiple windows and stuff all over the place.

My long-term goal was to try and develop a bunch of devices (synth, drum machine, sequencer) in Reaktor to make a fun little Reason type rack/groovebox for jamming on the sofa etc… these devices were taken from a drum machine I’ve been working on for that.

Prof_lofi:

Really curious about these but away from my computer - did you patch them in core or primary? I’ve been wanting to get into core (again, seems like an 18 month regular itch I get).

They look great btw!

Cheers Pal. In general the audio side is handled in Core and the control side (mapping, scaling, switching etc.) is handled in primary. I’ve not got my head around certain things in Core that I find a doddle in primary (mainly control scaling and switching etc.).

Next device is nearly done… I’ve had the delay built for ages now (use it quite a lot with my guitar)… it’s a ‘Frippertronics’ type delay. Very long delay times with gradual decay and degradation.

This kind of thing is possible to setup on other plugins… but I find it nice to have a simple device (especially the ‘Rec’ switch to enable recording to the delay buffer). The Wear parameter is controlling multiple parameters (filtering, saturation, modulation etc.). Will probably go up on the UL next week.

hermbot · 2022-07-06T13:51:01.479Z

I have not had a chance to try those out yet, but you’re doing a bang up job on the UI design!

Ithacus · 2022-07-11T14:25:07.888Z

See attached Nymphes Reaktor editor for anyone that might be interested (I had to update my patch for the new v2 firmware).

It is working ok for me. If anyone fancies trying it out feel free to download and have a go.

Although there are other editors out there now I thought this might still be of interest to some (I tried to keep this neat and in keeping with the Nymphes aesthetic).

Notes:

Main controls are Pink. Mod controls are white.
Mod source (LFO2, M-Wheel etc.) is selected from the bottom of the panel and edited using the white sliders to the right of the main panel controls.
Env 2=1 button links Envelope 1 to Envelope 2 controls… this means the VCA and VCF envelope controls can be adjusted easily from the front panel hardware controls (without having to use shift)… very handy IMO.
The bottom displays show M-Wheel, PB, AT and Velocity values (and can also be edited from the panel).

*The Nymphes logo has been used with kind permission from Dreadbox (I emailed them and asked).

image1079×307 50.9 KB

NymphesEditor_v2.ens (6.9 MB)

Prof_lofi · 2023-01-17T20:36:51.972Z

I don’t suppose any Reaktor-heads could help me out with this - no response from the Reaktor forum as yet:

I’m trying to make a double TG-8H ensemble for an upcoming performance (it’s so awesome - thanks everyone for your contributions to this thing).

I’m running into two issues - one the Random and Random TG makes a pop. I guess that’s par for the course but this happens to the other version of TG-8H in the ensemble even though I’ve changed the names of all the ICSends.

It even happens when the specific instance of TG-8H has its volume down.

Is this because the Randoms push the audio engine and essentially restart it briefly or something else? It seems to happen even when one TG8 isn’t connected to the output.

I really would like to be able to randomize one without it effecting the other, and/or for there to be no ‘pop’ if that’s possible.

I suspect it’s the engine being pinged and something to do with the switches changing the specific TGs being selected.

Thanks for any help!

Bill

n9n9n9 · 2023-01-17T20:45:30.616Z

I might turn the sample rate way down to 11k and see if it still happens while watching a CPU profiler to see if the pop is functional vs performance related. You might also wire up a simple fader after the ensembles and see if the pop makes it to output through that.

Prof_lofi · 2023-01-18T00:23:37.726Z

Thanks…seems it’s a global reset event. Don’t think it can be helped.

Yay reaktor

LazyCircuits · 2023-01-18T08:35:49.477Z

Does anyone know if you can sell on Reaktor licenses? I don’t ever remember seeing any in the old trade forum.

barrford · 2023-01-18T08:46:01.402Z

I sold one on, but it was about 15 years ago!
I’ve since bought it again.

Prof_lofi · 2023-01-18T09:46:09.474Z

Hi everyone -

So in researching GREs I found this excellent ADSR post about them which should be informative to anyone else encountering (probably old news to most here but thought I’d post nonetheless):

https://www.adsrsounds.com/reaktor-tutorials/global-reset-events-in-reaktor/#:~:text=A%20Global%20Reset%20Event%20(GRE,to%20track%20down%20and%20eliminate.

Also regarding selling your Reaktor license, I found this while posting the above to the Reaktor forum:

NI Community Forum

Selling my Reaktor license

I see there are some discussions already on this topic, but here goes: earlier this year I bought my friend's Reaktor license as he had just bought...

TanaBarbier · 2023-01-18T09:57:09.764Z

GRE off topic

Stupid thought I’d like to share, “Global Reset Event” reminded me of that album I listened to a lot, but not in a few years, time to put it back on !!
https://www.discogs.com/release/1573999-Busta-Rhymes-Extinction-Level-Event-The-Final-World-Front

thom · 2023-01-18T13:40:20.585Z

Yes, this article has been really helpful in the past!

Indeed, being aware of the occurrence of GREs can be crucial. In any case, it is important to view GREs not only as constraints, but also as assets.

In particular, a GRE is to my knowledge the only way to clear the buffer of the “Single Delay” Module, which can be very useful if, in other respects, the features of this Module are sufficient for your needs.

n9n9n9 · 2023-01-18T15:47:51.281Z

Might you be able to make this work better by creatively using a host? Thinking of VCV Rack’s VST hosting or Bitwig.

If you could break the instances of the ensemble out into seperate instances of the VST host and then trigger the reset event on the host level with a control that would also momentarily mute the instance of the ensemble, might you not be able to isolate the reset even to a single ensemble instance and mitigate the pop?