#939

They do what it says on the box😏

I use them with my twin BSP setup. Considered getting modular brains instead (same thing, only in the rack) for convenience. Great little boxes no doubt!

1 Like
#940

Good luck! I’m playing my first electronic gig in a few weeks as well. You’ll do great!

4 Likes
#941

Screenshot_1
Screenshot_1.png810×666 705 KB

Here’s one of my cases. I still need to do some changes on this. I’ll replace the Serge Resonant EQ with a Random Source version and add a CG Products delay in there, if I can find any of these two modules second hand any time soon. Also plan to grab some upcoming stuff to put on the sides. MN said I’m voiding my warranty if I mod their side panels, but who cares.

This setup is a physical modeling haven for me. I’m pairing it with a Zoom R8 for recording/playback and I’m good to go!

8 Likes
#942

I’ve been in the process of building a custom 11U 84hp case for about a month now, it’s been a slow process with a CNC learning curve for me. I’ve organized my two control skiffs real well though! By the end of this month I’ll be able to post the full case.

image
A7BB7765-5AF2-4316-A0F3-04A491DD9050.jpeg4032×3024 3.7 MB

11 Likes
#943

I finally jumped into modular last week. This is just a start, with lots of room for expansion once I figure out where I want to go with it. Mainly playing with East Coast patches for the moment.

1st_modular_20190402_163509
1st_modular_20190402_163509.jpg1600×1200 627 KB

16 Likes
#944

image
FBA312E8-090C-43E9-A955-E7DA4B6BCB1A.jpeg3176×1536 1.06 MB

unpatched after a couple shows. received a case (on the left) and module (282e in the right case) from Keen Association. the 282e does preset management in addition to allowing you to draw some pretty interesting envelopes on an X/Y grid. i moved it to the case on the right so it’s preset manager wouldn’t conflict with the one in the 206e. you can disable the preset manager on the 282e but i found the 206e PM wasn’t saving the settings of the 282e, which is kind of important. very interested to see how it plays with the MArF!

10 Likes
#945

image
93CD8EE7-0BFC-4409-A0D4-93CBDC14C0EC.jpeg3024×4032 3.75 MB

currently.

it’s changed a million times, but right now I’m trying to do all my drums/sequencing with 2 ansibles, earthsea, and teletype. it’s been a lot fun figuring out ways to do it, since I’m normally just Rene + Varigate 8. anyways, maybe it’ll change again. been wanting to go down to 4u or 7u often lately.

10 Likes
#946

So after amassing nearly 800hp of modules, I realized I was definitely losing my way and creativity was taking a back seat to “oooh fun stuff”. Listed all my extra gear for sale, and stuck with these three cases. Quite happy, and looking forward to the rewards of deep exploration.

AED7D550-A8FE-46ED-BA6D-4359C86A1F28
AED7D550-A8FE-46ED-BA6D-4359C86A1F28.jpeg2153×2153 1.15 MB
IMG_1384
IMG_1384.jpeg3024×3024 2.85 MB
272D728E-B9CA-429C-A5A4-537DAFAF443E
272D728E-B9CA-429C-A5A4-537DAFAF443E.jpeg3024×3024 1.69 MB

35 Likes
#947

I really dig the concept for the Morphagene case. It’s eloquent for sure.

1 Like
#948

Where did you find the 2hp Poti?

#949

Custom panel from BKM, same guy that did the Pamela’s panel in the lunchbox.

#950

image
198ABFC5-3BEF-4C2F-B263-1F8FD7A1D2DF.jpeg4032×3024 1.88 MB
image
21E2DE6B-4587-4FCA-A7A6-C5980251F72F.jpeg4032×3024 2.37 MB

I made some custom cases. Here’s a dry fit before they head off to the powder coater. This is v2 using aluminum instead of steel for the enclosure.
I have two more in 84hp as well as 104hp that Will be looking for new homes very soon.
They are juuust deep enough to fit an ansible so 39/40mm is the max module depth.

These cases are (intelligence) 4u+. They are offered with an integrated row power in the 4hp horizontal row at the top as well as a rigid bus board. They will come stock with a satin black powder coated finish but are available in any color for a little upcharge.

If you’re interested, please send me a dm for pricing / lead time. This little run is just to test the waters but if it’s successful I’d really like to make more!

-Smith

29 Likes
#951

I’ll be there :slight_smile:

1 Like
#952

Got any contact info for him?

#953
#954

I worked with the system cartesian almost exclusively for nearly a year before switching to a shared system (though I kept majority of the cartesian too) and have to say, it’s a super underrated system. I still feel like I’ve got better results out of it than the shared system, it really felt like an instrument I could handle and seemed to balance limitations and features perfectly!

(as long as you have some pedals for effects)

4 Likes
#955

Yeah I’m absolutely loving the limitation of it, and what’s possible. I’ve got BIM/BAM/BOUM to use with it and I haven’t patched anything up that wasn’t super fun. Telharmonic has to be one of the most underrated modules out there.

2 Likes
#957

It’s the only module I sold from the cartesian (apart from Rene n Woggle which were replaced in the shared system). I constantly regret it.
I’ve currently got a BAM n BOUM is high on the list of next potential buys, BIM eventually if only just to complete the set!

#958

Updated firmware on BIM gets you “thru” mode. Nice for putting in front for anything you sample.

2 Likes
#959

image
21AAAC8D-99C3-4B33-8595-18220EB726E4.jpeg3024×4032 4.49 MB

This is what I’ve been working with for a little while… I can pretty much do what I’m trying to do with this setup (rhythm + several voices or general sound design), still tweaking it around the edges.

7 Likes