#21

Were the hardware issues fixed? I’m quite tempted by the DIY kit.

#22

any news on this front?

#23

have you tried contacting sssr labs?

#24

Anyone know if this is fixed? I was interested in buying one when someone on the facebook quadraphonic discussion group pointed me over here to this thread. TIA.

#25

since this is now getting linked from other places… could you post in that thread and suggest people should check with sssr labs, as only they can provide the answer?

#26

Will do. Being newish, I follow blithely.

#27

thanks! i posted my findings here back when i had the module, i don’t have the module anymore and i don’t have any new info. just want to make sure this thread is not used as the authoritative source of information.

#29

Hello
If possible can someone please guide me as to how to connect sssr sm010 with teletype and get it up and running
Thanks

Telex: Teletype expanders
A user's guide to i2c
#30
1 Like
#31

Yes I’ve read the thread before
Do you remember how to set the address on the sm010 side of things
I believe I have everything set except for that
And I cannot find anything in the sm010 manual
Thank you

#32

found old notes - to select one of the 3 addresses go to setup, row 15 is where you select it (A/B/C). on teletype side you select it with MA.SELECT x where x is 1, 2 or 3. this is not stored in flash, you’ll need to put it in the init script if you’re not using the default address 1.

#33

Thank you i still got nothing tho
Does anyone remember if it Is still only 3 wires for I2c ?

#34

twenty characters of yes

1 Like
#35

Hello so sorry to bug again
Does anyone know how to hook this up with teletype?
I’m having an extra difficult time
I believe I have I2c connected properly
( 3 wires I swapped the sda and scl on sm010)
I went to line 15 on sm010 setup selected unit 1
I type in ma.select 1 on teletype
Next I try
Ma.step 1, the teletype responds with 1
What am I missing?
Thanks in advance if anyone can help

SSSR Labs SM010 and Teletype
#36

you don’t need a parameter with MA.STEP, it always advances by one step. have you tried other ops? double check i2c lines - GND to GND, SDA to SDA, SCL to SCL. do you have any other devices connected to i2c? do they work? finally, update sm firmware to the latest - 1.1 version doesn’t include teletype support.

#37 
     !!!!!Victory!!!!!

Thank you again and again

#38

FWIW I just got a Matrixarchate direct from SSSR Labs (ordered before I saw this thread) and I can reproduce the row 13 issue. It is extremely easy to mitigate though, a dummy plug in 13 fixes it.

I don’t have it in the same case as Teletype right now but I look forward to trying out the TT integration in the future!

#39

can you post what the problem was? might be helpful for others.

they really ought to add this to the module description…

2 Likes
#40

After much pain and agony I’ve come to realize
(For now)
I can not have my txb connected to I2c for it to work
All modules are jumped in order like everyone told me in a previous thread.
My sm010 is now at the end of line
In order my I2c is teletype, txi , txo, jf, w/, sm010
I now would like to connect my txb somewhere along the path and have not found a placement in the chain that works.
The Problem for me appears to be the txb at the moment
Any help would be great
Thanks

#41

Do not power your TXb.
Connect it as near to Teletype as possible.