#9

code folder looks fine

#10

So I just hooked up my grid and it’s working great with Poly.Perc. From the select screen by pushing button 3 I get “no script information” then I press button 3 again and it goes to this screen:

image
9C511D43-9F42-4006-878B-1DAD68B3D818.jpeg3024×3024 2.41 MB

This is what shows on Maiden while on the screen from the photo above. My grid does not light up at all when I select KR…

image
4B701BA6-6040-4EB9-BC5D-2E11490FED65.jpeg3024×3024 5.13 MB

#11

Right. I’m going to have to pass this one up the food chain. Sorry, I don’t have a clue.

@tehn any idea why on this?

#12

we’re missing the top of the stack trace so can’t see why banging the parameter set is failing - probably while calling a param update func.

@samule.edmoon it would be good if you could post more of the matron output, preferably as text instead of a screen photo.

one possible (likely) reason is that you don’t have PolyPerc installed. (it’s installed by awake now.) the stack trace would be consistent:

### SCRIPT ERROR: init
/home/we/dust/code/strum/strum_pp.lua:632: attempt to call a nil value (field 'pw')
stack traceback:
	/home/we/norns/lua/core/norns.lua:185: in field 'pw'
	/home/we/dust/code/strum/strum_pp.lua:632: in field 'action'
	/home/we/norns/lua/core/params/control.lua:76: in function 'core/params/control.bang'
	/home/we/norns/lua/core/paramset.lua:272: in function 'core/paramset.bang'
	/home/we/dust/code/strum/strum_pp.lua:646: in function 'init'
	/home/we/norns/lua/core/script.lua:71: in function 'core/script.init'
	[C]: in function 'xpcall'
	/home/we/norns/lua/core/norns.lua:186: in field 'try'
	/home/we/norns/lua/core/engine.lua:83: in function </home/we/norns/lua/core/engine.lua:82>
>> reading PMAP /home/we/dust/data/strum/strum_pp/strum_pp.pmap
#13

The PolyPerc version of Strum works for him. It’s the KarplusRings version that throws the error.

#14

ah right, sorry. in that case maybe KarplusRings is missing (it lives in we/lib, since its author has not claimed it) - the stack trace would be similar. both versions work fine for me with the engines installed.

2 Likes
#15

Both versions are working fine for me.

This happens for me as well, but pressing key3 loads the script…

#16

oh right: ‘no script information’ is due to the leading whitespace (typo) in the first comment line of the scripts.

2 Likes
#17

Ok. Will fix this in repo.

Edit: updated.

#18

I think I may have deleted the we/lib by accident. Is there any way to reinstall it?

Norns: help
#19

Not sure. Ask in the help thread.

#20

@carvingcode, strum is super fun! can’t believe I waited so long to play with it :slight_smile:

Edit: realized that this was solved in another thread :slight_smile:

2 Likes
#21

Glad to hear it. Sometimes, simple things work.

2 Likes
#22

On the params page for both strum scripts the amp value doesn’t raise or lower the volume of the engine for me. Anyone else? Also if I set midi out and set the channel to any value it always sends out on channel one

#23

I really don’t know why that is. I’m using the same code for setting up parameters as Awake. The AMP param works in Awake, but not in the PolyPerc version of Strum. Same with the KarplusRings version.

Mysteries of norns…

#24

Enjoying strum kr… I love the way it runs extremely fast and has great staccato sounds.

Can I ask how one accesses the reverb - or turns it off? though it is very nice i want to go much dryer into my DAW. I am confused about this over a few of the dust apps. is it just a question of whether the coder has brought these controls through to the parameters page?

#25

Try the SYSTEM > AUDIO menu

#26

THANKS! I hadnt twigged there was another menu there…a whole other world of controls. Half suspected i was missing something obvious.

1 Like
#27

neato script!

running it with both MIDI and Audio.
MIDI into the Deluge and also clocking a Little Deformer 3.

1 Like
#28

Sequencing the endorphin.es shuttle system with strum this morning. Really love the simplicity of this sequencer, thanks @carvingcode

3 Likes