#1

Picked up the Monome Switch super excited to use it and my WW only problem is it didn’t come with the power supply. I see the all this.
+9v to +24v DC output
Tip-positive
1.2A (or greater)
2.1mm Barrel connector

But I am having trouble finding the right one im also afraid of buying the wrong one (I have blown stuff up in the past) Any one know online where I could find the right power adapter? Wanted to ask y’all before I bug Monome to sell me one :slight_smile:

#2

why didn’t your switch come with a supply? did you get it second hand?

http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?search_type=jamecoall&catalogId=10001&freeText=252779&langId=-1&productId=252779&storeId=10001&ddkey=http:StoreCatalogDrillDownView

#3

Thanks so much. Yeah I got it off the trade list. Hope to get a earthsea form you direct soon. Also still want to get you out to philly sorry that thing at the Hacktory never panned out they seemed a little stretched thin when we last talked. Hopefully down the road we can get something going!

#4

ah, hello jerry! and oh no worries-- it’s been an insanely busy year for us as well. would love to make it down in the future.

#5

I’m rummaging through my bag of UK power adapters to find one suitable for switch, and have a pretty basic question about power supplies.

The switch power supply spec asks for “+9v to +24v DC output”.

My understanding of this is that it’s talking about an acceptable range, and my adapter with +12v DC output will be fine (it meets the other requirements).

This seems obvious enough for me to feel a little silly asking, but I’d love to get some confirmation before I do anything stupid.

#6

Confirmed. +12V will work. It’ll need to deliver at least 1A.

Be sure the plug is center-positive. The Switch is protected against barrel-positive so there’s no issue if it’s wrong.

1 Like
#7

Excellent, thank you. monome modules here we go!

#8

Hey,
I have a Monome switch that came with the US power supply. It works in Europe, too. But I need an adapter for our local plugs in order to use it.

And since I have yet to buy one, I was thinking about buying an European power supply instead. Do any of you guys have such a PSU and could post a link?

Thanks

#9

9v or 12v is fine. around 1A. center positive. 2.1mm barrel

#10

Thank you. If my math is correct, this one should work then. (It’s from Ableton Push 2).

IMG_8879
IMG_8879.JPG1321×1321 409 KB

#11

Just to answer myself: The Push psu didn’t work.

#12

weird, perhaps the barrel size is wrong.

#13

I found the error. It was not the psu but a loose solder spot: The little three-pin thing that is mounted behind the psu plug was not fully attached. But I was able to fix it with my very limited diy skills.

Now everything is running smoothly.