#161

Fantastic work. Just wanted to say thanks for what looks like a great addition to TT!

#162

Truely amazed. Thank you

#163

Stunning. I can only assume what it means to commit oneself to such a project.
Congratulations on the release!

1 Like
#164

A huge thanks to you and all of the developers who have volunteered their time to make these already amazing devices more amazing still! Much gratitude to everyone who has contributed!

2 Likes
#165

Yay!! This is such a huge release. Thanks for all the hard work :star_struck::star_struck::star_struck::star_struck:

#166

thanks for the kind words! and big thanks to everybody who contributed through ideas, coding, documentation, testing and helping others with teletype questions.

question - has anybody tried w/ ops yet? i made some changes to i2c addresses and want to make sure everything is working properly. also, forgot to mention - these changes included a change to the addresses used by er-301.

here is what you have to do: on er-301 switch to admin, go to system settings, scroll all the way down to teletype settings and select:

  • 0xB1 or 0x31 address - this will correspond to SC.CV 1…100
  • 0xB2 or 0x32 address - this will correspond to SC.CV 101…200

depending on your version of er-301 you might not see some of the addresses, but you’ll have at least one of the above. you do have to change it as the default address right now is 0xB0.

5 Likes
#167

I just finished my very first session using the w/ ops (fantastic!) and everything seemed to work well; I don’t think I tested the cue op, though.

This is indeed an amazing effort - many thanks!

1 Like
#168

great, thanks! just needed to know if any ops work, this indicates the addresses are set up correctly.

2 Likes
#169

wow, thanks so much!! i was just wishing for a PN.RND while sitting with my system the other day. also, can’t wait to explore w/ support!

#170

Thanks for your work! Awesome additions, undo and moving with ctrl+arrows are super useful!

#171

Just found a bug: RRAND outputs values out of specified range

image
88901993-FF79-43F4-829C-D6DBA0B60897.jpeg3024×1047 327 KB
image
ADE52904-13D1-45E2-B74C-D392F64F1F05.jpeg3024×1187 285 KB

1 Like
#172

thanks for the report, will take a look! also just realized there is R op which also needs to be modified

1 Like
#173

I’m just getting a grip on teletype and all these new additions mean I’ve got a lot to learn! I’m really lookin forward to exploring all these new features and thank you very much for the hard work.

#174

RRAND has been fixed. i also found a couple of other issues - RAND used with negative values wouldn’t cover full range, RAND -1 would always return 0, and R didn’t have any of the latest fixes at all. this is all fixed now, i think i’ll post a new version in a couple of days in case any other bugs are discovered.

6 Likes
#175

Sorry if this is not the right place for this - I’ve read some other threads and did not quite get to what I wanted. I want to use the Grid Ops in v.2.3.

Is there some kind of solution where I can click the “buy now” button and just have something that works without having to cut and tape it together or stick adapters on all ends? I’d like something clean and fussless, if possible, and would be willing to pay a little more for the convenience and neatness of it.

Does the Arturia solution isolate data and power without end user mods? If so, does anyone know what kind of adapterless cables I need to go with it? I think the Arturia is micro usb-b. So micro usb-b male to usb-a male for TT connection? What is the grid connector type?

#176

the Arturia device is three micro-USB, one male two female. on the Beatstep Pro it requires you to hold “shift” during startup, so I do not know (and cannot test) if it will work with grids.

#177

before getting an offworld, I used the arturia solution. It works, but you need a micro/mini converter to connect to grid.

#178

Thanks. I don’t want to build an offworld though, and it seems likely that monome won’t be restocking anytime soon?

Edit: looks like to be adapterless, I would need to a micro-usb female to mini-usb male cable. Does that sound right?

#179

i use the arturia thing that came w my BSP. haven’t had any problems.

#180

if somebody could post a description on how exactly to use the arturia adapter and what other cables are required i’ll create a page where we can document all the different possible solutions (or if you’re using some other solution and can document it that’d be awesome!)

3 Likes