#23

well thank you very much, really appreciate the kind words and i am glad you liked it and found it useful :slight_smile: this whole ecosystem is amazing. there is a bit of a learning curve for sure but well worth it in my opinion. one way to dive in headfirst, which is what i did. i made a small system with NO other voltage sources. this way you have to do everything on tt and before long you can do stuff super fast!

3 Likes
#24

That’s really nice. BTW, the comment at 1:15 has the wrong param for the third voice :wink:

So not only did I learn something new about Teletype JF coding, but I also see that I’ve missed some interesting updates to Kria.

1 Like
#25

thanks! glad you got something out of it! and yes the typos. . . sorry about that. i will add the correction in the description :slight_smile:

#26

Just popping in to say; This video has really really inspired me. I am so excited to try some of what you’ve built here and I honestly GREATLY appreciate the work you put in to this. It is so simple, elegant and informative.

Only thing I would ask is that you consider potentially making more!!! :smiley:

Oh wait! I’ve found more of them! Awesome! You rule!!!

1 Like
#27

thanks, this is really nice to hear! glad you enjoyed it and got something useful out of it as well. i do plan on doing more too :slight_smile:

2 Likes
#28

Just finishing building my Teletype, looking forward to watching this again with the ability to try follow along. Hope my lack of TXo isn’t too problematic.

1 Like
#29

David,

What does your little system you mentioned, consist of?

#30

It was this system.

IMG_0281
IMG_02811500×2000 602 KB

4 Likes
#31

I just got my Just Friends today, so I thought i’d give following this along a shot as I’ve seen it before and thought it was so awesome.

All is well until I try to get the tuplets going, in this case, I don’t have a TX0 so I was using TR.P1 / TR.P2 / TR.P 3 / TR.P 4 in the M script to send these triggers to scripts 1-3, when I try to trigger script 8 (using Trigger 4), it contains the following code

X RND 11
TR.P 3 MUL 3 X

but nothing is happening, TR.P 3 continues to trigger as usual. I’m new to teletype so i’m sure this is something really simple/obvious, or something i’m doing wrong because i’m not using a TX0 but if anyone has any ideas that would be great as i’d love to get this going in the same way and then experiment with it further :slight_smile:

3 Likes
#32

Well I am glad you liked the video!!! But to the best of my knowledge the only way to do the tuplet part is with the TX0 as that has individual metronomes which is how you can achieve the tuplets. Teletype on its own has only the single one. Again, tt is vast and likely there is a way to do this sans TX0 I am just not sure how you could do it :slight_smile:

And congrats on Just Friends! Such a great module.

#33

Thanks David! I will continue to explore and see what I can discover :slight_smile:

1 Like
#34

Are you trying to ping trigger 3 between 0 and 33 times? Or are you trying to ping it at a different rate than your metro?

In either case, DEL.R X TIME:... would probably help. Triplets for example:

DEL.R 3 / M 3: TR.P 3 (fire three pings on trigger 3, spaced by 1/3 of M rate)

4 Likes
#35

Thanks! I actually just played around with the del.r command and managed to get similar results. Tetetype is a lot of fun!

#36

I’ve tried to follow the tutorial but I couldn’t because the signals of TXo doesn’t trigger anything. I mean, after

TO.M.BPM 1 70
TO.M.ACT 1 1

I see the trigger lights from TXo blinking. However, when I connect these outputs to Teletype’s trigger inputs, Teletype doesn’t trigger any script.
I’ve also tried to connect TXo trigger outputs to the gate of my envelope generator but the envelope generator isn’t activated by these signals neither.
Is because they are weak? If so, how could I make them stronger?

#37

Did you try to set your Txo gate with this ?

TO.TR.WIDTH x y (x for the output and y the pourcentage)

1 Like
#38

I didn’t use the command you mention.

But I used

TO.TR.M x y

and I saw how leds were more/less time turned on (without any effect on triggering Teletype’s trigger inputs).

Anyway, right now I’m not in front of my eurorack case, but this afternoon I’m going to check if

TO.TR.WIDTH x y

helps.

Thanks!

EDIT:

TO.TR.WIDTH x y

has no effect. I mean, it works, lights blink more or less time depending on y value. But it has no effect on triggering other modules trigger inputs. Does anybody know why?

#39

Hmmm. Few ideas. Can you take the signal and trigger something else that is not teletype? Like an envelope or something? The other thing that has happened to me a few times is that the 2nd circuit board can come loose on the TX0 causing weird behavior. Perhaps you can open your case and re-seat that board (I ended up using a zip tie to keep it on there).

1 Like
#40

Yes, I tried to trigger unsuccessfully something else, an envelope generator.
Tomorrow I will open my case and re-seat the 2nd circuit board. Thanks for the tip!

1 Like
#41

@SMesquida Ok it’s strange…
Have you got an oscilloscope for checking if something go out from your Txo ?
Do you try to pass your gate out from your Txo thru an offset for adding voltage and then to an EG ? Does it trig with more voltages ?

#42

I re-seated the second circuit board and nothing has changed :frowning:
Unfortunately, I don’t have an oscilloscope for checking if something go out from my TXo. And I don’t have an offset module for adding voltage…
I don’t know what could I do. Anyway,thanks for the help.