Telex: Teletype expanders

disquiet · 2019-01-28T22:08:48.486Z

TXb achieved. Thanks!

yoyosandshoes · 2019-01-28T22:09:19.420Z

Got what I was after thansk @bpcmusic!

whitmo · 2019-01-28T22:09:47.647Z

I was too slow on the draw to pick up any i2c cables… what would yall recommend wrt to buying or making one’s own?

davehoec · 2019-01-28T22:10:26.996Z

Got em! Thanks @bpcmusic!

okyeron · 2019-01-28T22:10:32.592Z

I have some available and could make more in the next few days:

https://denki-oto.weebly.com/#/

(EDIT - and I can make some reversed cables for the older ER-301 as well)

adrianf · 2019-01-28T22:10:34.149Z

DIY i2c cables Tech

there are numerous ways to connect your i2c modules together. quite simply you need to make a connection between the SDA, SCL, and GND pins. make sure they match. originally we were using 2x3 headers on 6 conductor ribbon cable: you can of course put multiple headers (as many as you want) on the same cable. this is not difficult. cut the ribbon. use some pliers. there’s a satisfying click when the headers lock. recently links for these popped up, and they will work well. particularly i…

Also posted above by @alanza

Also some OD forum cross posting:

O|D Discussion – 27 Jan 19

16N Faderbank is Happening

FYI. These swapped cables are only necessary for ER-301 with the older revision 7 hardware. http://wiki.orthogonaldevices.com/index.php/ER-301/Revisions

Hovercraft · 2019-01-28T22:10:39.136Z

Somehow I managed to underestimate the world’s rapacious thirst for reversed I2C cables–the planetary supply was depleted in 1 minute. At least I snagged my TXb–haha.

IOSISdrone · 2019-01-28T22:10:48.506Z

I just ordered a TXb (thanks @bpcmusic!); does anybody know where I can get a proper i2c cable to be used with an ER-301?

edbkt · 2019-01-28T22:15:05.703Z

The adrenaline is real. Thanks, @bpcmusic!

Duksos · 2019-01-28T22:15:39.068Z

Thank you much !!!

Hovercraft · 2019-01-28T22:17:24.669Z

That would be great–could use a reversed cable. Thanks!

jflee · 2019-01-28T22:18:06.350Z

Set my alarm to get my order in… glad I did! Thank you @bpcmusic !!!

Inkwell · 2019-01-28T22:21:42.898Z

Got everything on my list (minus cables ha, looks like I’ll be hitting up @okyeron), thanks so much @bpcmusic!

Duckett · 2019-01-28T22:25:54.255Z

Glad I got mine in time! Thanks so much @bpcmusic!

clark.gable · 2019-01-28T23:04:06.396Z

Stoked to grab the TXo+, TXi, and TXn! Should’ve jumped on i2c cables first though – they were gone in seconds! Just ordered some female-to-female breadboard jumpers on amazon instead. From the DIY i2c cables thread it looks like they should work.

dansimco · 2019-01-28T23:08:50.629Z

Email notification system worked a treat!

XiXora · 2019-01-28T23:08:59.213Z

Panicked as I looked at the time an hour late… all good now.
Now, to find some space in my case.

rklem · 2019-01-28T23:10:11.055Z

I could use a reversed cable too. Thanks!

(The reversed i2c cable dematerialized in my bpc shopping cart, but at least I could grab a TXb – thanks @bpcmusic!)

Prnts · 2019-01-28T23:46:41.436Z

Missed the i2c bus 20 characters of fml

Ravel · 2019-01-28T23:49:22.441Z

Was just clicking on PayPal when the 2x Txb I had in my cart disappeared. So gutted Please make some more @bpcmusic