#1402

You’ll want to ping @bpcmusic but his licenses do allow commercial use. Cc-by-sa 4.0 on the hardware.

1 Like
#1405

Doesn’t look like a can message @bpcmusic directly at the moment being such a noob :slight_smile: Maybe he’ll reply here?

1 Like
#1408

staff notice/reminder: forum rules prohibit attempting to buy, sell, solicit buying/services/etc outside of the Trade category. please keep this thread clean; limit any buying/selling to Trade or PMs.

  • don’t attempt to buy, sell, trade, offer or solicit paid jobs & services, etc in other categories outside of Trade.
#1409

No worries at all. I used to run a thing called GMSN! which I closed down for exactly the same reason :slight_smile:

Thought I would check what the rules were first :slight_smile:

#1410

Behavior is still the same after this, TO.ENV.TRIG 1 works but TO.ENV 1 1 doesn’t open the envelope. I also tried a TO.CV.RESET 1 in case maybe the software was confused about the current CV value when calculating the envelope samples or something? No effect. I’m left wondering if this is possibly a hardware issue or something, though all the CV outputs seem to work fine otherwise, and measure fine on a multimeter, very odd. Has anyone encountered something like this? This is actually a TXo+ so it’s using a Teensy 3.6.

#1411

@csboling - weird. should work. i’m on the road this week; i’ll post a full example script when i get back to LA. doubt it is hardware…

1 Like
#1413

Are there any plans for more production of these units? Thanks!

#1414

I don’t know about the Telexb, but there are plans for TXi and TXo units to be available on pusherman’s website in the coming weeks.

It also appears as if there are telexb kits available currently on Pusherman as well:

https://pushermanproductions.com/product/telexb-2hp-powered-i2c-bus/

2 Likes
#1415

I will have to keep an eye on that. Specifically looking for a TXb that is already assembled.

Are there instructions on assembling TXb? I couldn’t find anything on github, but i could’ve been looking at the wrong thing.

#1416

Check out the BOM and instructions

I believe this is a different layout, but parts and materials would be the same. I’m actually guessing that if you don’t want to build it, there might be folks around here that would be willing to help.

1 Like
#1417

That is a good point… anyone want to make a TXb for me?? Name your price! :grinning:

1 Like
#1418

To be honest, if my current circumstances allowed, I would do it for you! But I actually wonder if it’s worth creating a new thread, probably in the teaser section for people to buy DIY services from each other. Could be a nice way for the community to continue to support each other. Who would we comment to to get that going?

2 Likes
#1419

This is what the Trade category is for.

#1420

Yeah, I’m sure I’m not the only one looking for one.

I will make a post in the trade section when I get a moment. Thanks for the help here.

#1421

I figured that would be the case, but I wasn’t talking a new category, just an actual thread for any request of DIY assistance to be consolidated.

#1422

Fwiw, the correct repo is this one:

2 Likes
#1423

Cool cool! You could start a thread :slight_smile:

#1424

I would like to get my hands on a telexO for microtonal coding. But they seem hard to find.
Are these scale ops also implementable on just the teletype itself?

TO.CV.SCALE
• TO.CV.SCALE x y

#1425

The TO.* family of ops is only for the Telex output.

You can do microtonal scales on the Teletype itself. It’s a little more complicated as you have to use lookup tables (i.e. data in the patterns) and the DACs in the Teletype aren’t quite as precise as the Telex’s. But it will work fine.

#1426

Thanks jnoble , would you like to help me with it with an example? :slight_smile: