#29

@okyeron

That would be awesome.

@outoftunewolf I created a version of the ARP script of the Neotrellis M4 to work with USB Midi clock. @jedgar removed the synth engine, so it’s Midi ARP now. If there is a Midi clock, the ARP is syncing to it. Maybe thats helpful? Works great with Orac.

1 Like
#30

Oh cool.

I just “re-paneled” my M4 last night so maybe I’ll play with it a bit more today/tomorrow. (Need some longer screws now tho)

1 Like
#31

M4 running my neo-monome code (proof of concept)

Would need to make a hex of this firmware for now. Requires a hacked tinyusb library, but im going to see if I can get changes submitted. :grin:

if someone wants to test this here’s a UF2 file. (Updated)
neotrellis_m4_monome.UF2 (1 MB)
Instruction-ish video here for flashing via our pal @jedgar

6 Likes
#32

hi @okyeron, great news. I flashed the UF2 file on one of my Trellis M4 but Fates will not see it as Midi or Grid device (under System -> Devices). I use a normal (working) USB cable. Any idea?

#33

Right - you will need to do the diy device fix for Fates to see it as a grid. (with this firmware it’s grid only - no midi) Details here

1 Like
#34

Thanks @okyeron. With this firmware update it is now working and I slowly understand how Loom works.

Very cool. Now the Fates becomes even more useful and fun to play with.

2 Likes
#35

@okyeron would your code also work with the Adafruit 8x8 NeoTrellis Frather M4 Pack?

The Neotrellis M4 is great for travelling and mobile use. But now that I know what to do with a Grid I like a bigger on of cause for my “home studio“.

#36

Yeah it should, but I don’t have a feather M4 to compile against right now to make a UF2 file.

To compile yourself you would need to change a couple core Arduino files for TinyUSB. I may also need to update the repo

Maybe I’ll get an M4 this week to test

#37

@okyeron no hurry, I have to order the Adafruit 8x8 NeoTrellis Feather M4 Kit Pack from overseas and it is not in stock at adafruit.com at the moment. I wanted to know if it is possible before ordering. It can take weeks before I have the kit. Or I have to order the different parts from different shops in Germany.

I don’t mind to compile it myself, if the modified core Arduino files for TinyUSB are available in future. Then I cloud change also the color of the LEDs, I like colorful light on black hardware :wink: .

1 Like
#38

So far the small M4 is a proof of concept, so the others should work. But if you want to be sure before ordering, give me a week and I’ll do some testing. :slight_smile:

1 Like
#39

Great. As I said, no hurry (there are other eurorack modules waiting to be purchased before. No I don’t have GAS, I can stop buying tech and modular gear any time, really).

1 Like
#40

I’ve created CircuitPython code for triggering sequences and samples on the 1010 music blackbox using the Trellis M4: https://github.com/jedgarpark/JEP_NeoTrellis_Blackbox_Triggers (also a version there for a 4x4 NeoTrellis driver + Feather M4).

4 Likes
#41

Happy to report mine works really well with Fates.

It’s SO portable!

Thanks again for all of your hard work @okyeron!
:smiley:

2 Likes
#42

Can you do a the same thing for a Norns Shield?

#43

EDIT - Please be aware this is a hack/workaround and is not officially supported.
Proceed at your own risk

See this message for details

#44

Ah cool, thank you! I tried it and it did something weird to the OS, particularly removing the “Audio>” in the “System>” so I’m just going to reflash the shield. I appreciate the quick response though!

#45

Could be something odd with the most recent norns code (?)

The steps above should put you on the “master” of the norns codebase as it is on github. In other words, this is ahead of a full release. Sometimes there are bugs.

Gonna test on my shield here shortly

EDIT - @briangriffith the AUDIO menu is removed/moved in the most recent code on github

#46

got my m4 in the mail yesterday – it’s a sweet lil thing :slight_smile:

unsure if folks have had this experience, but running into some interesting behavior with norns where about 100-150 seconds after it’s plugged in and running simple MIDI into a WIP script, all processes seem to come to a dead stop – they restore if i unplug the m4. running dmesg after, i’m seeing usb 1-1.3: urb status -32.

figured i’d put feelers out there to see if folks have run into similar weirdness :revolving_hearts:. happy to assume it’s the WIP script, but this doesn’t happen with an OP-Z or similar controller, so would be good to hear any experiences.

#47

Which code are you running? I could do some testing later to see if that happens on fates/shield.

#48

thanks steven!

able to repro with these steps:

  • load the midi_keypad code onto the M4
  • load molly_the_poly on norns
  • plug in the M4, start playing notes, all’s well for a bit
  • after 2 minutes-ish, the norns UI freezes but networking is still available
  • unplug the M4, all returns to working

stock norns on 200712, super curious if this is reproducible on anyone else’s units. thanks so much!

here's the output from dmesg 
[   62.972210] usb 1-1.1: new full-speed USB device number 4 using dwc_otg
[   63.112307] usb 1-1.1: New USB device found, idVendor=239a, idProduct=802f
[   63.112315] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   63.112320] usb 1-1.1: Product: Adafruit Trellis M4
[   63.112324] usb 1-1.1: Manufacturer: Adafruit LLC
[   63.112328] usb 1-1.1: SerialNumber: D01B51C85338533335202020FF132720
[   63.138445] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device
[   63.140656] usbcore: registered new interface driver cdc_acm
[   63.140665] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   63.165882] usbcore: registered new interface driver snd-usb-audio
[  165.415942] usb 1-1.1: urb status -32
[  165.421935] usb 1-1.1: urb status -32
[  165.424954] usb 1-1.1: urb status -32
[  165.427965] usb 1-1.1: urb status -32
[  165.430939] usb 1-1.1: urb status -32
[  165.433952] usb 1-1.1: urb status -32
[  165.439961] usb 1-1.1: urb status -32
[  165.442953] usb 1-1.1: urb status -32
[  165.445939] usb 1-1.1: urb status -32
[  165.448954] usb 1-1.1: urb status -32
[  165.451957] usb 1-1.1: urb status -32
[  165.454953] usb 1-1.1: urb status -32
[  165.457963] usb 1-1.1: urb status -32
[  165.460955] usb 1-1.1: urb status -32
[  165.463963] usb 1-1.1: urb status -32
[  165.469951] usb 1-1.1: urb status -32
[  165.472957] usb 1-1.1: urb status -32
[  165.478949] usb 1-1.1: urb status -32
[  165.481941] usb 1-1.1: urb status -32
[  165.484943] usb 1-1.1: urb status -32
[  165.487949] usb 1-1.1: urb status -32
[  165.493950] usb 1-1.1: urb status -32
[  165.496940] usb 1-1.1: urb status -32
[  165.499943] usb 1-1.1: urb status -32
[  165.502950] usb 1-1.1: urb status -32
[  165.505952] usb 1-1.1: urb status -32
[  165.508950] usb 1-1.1: urb status -32
[  165.511951] usb 1-1.1: urb status -32
[  165.514955] usb 1-1.1: urb status -32
[  165.517958] usb 1-1.1: urb status -32
[  165.520953] usb 1-1.1: urb status -32
[  165.523954] usb 1-1.1: urb status -32
[  165.526950] usb 1-1.1: urb status -32
[  165.529955] usb 1-1.1: urb status -32
[  165.532952] usb 1-1.1: urb status -32
[  165.535945] usb 1-1.1: urb status -32
[  165.538941] usb 1-1.1: urb status -32
[  165.541942] usb 1-1.1: urb status -32
[  165.547955] usb 1-1.1: urb status -32
[  165.550940] usb 1-1.1: urb status -32
[  165.553951] usb 1-1.1: urb status -32
[  165.559951] usb 1-1.1: urb status -32
[  165.562950] usb 1-1.1: urb status -32
[  165.565941] usb 1-1.1: urb status -32
[  165.571943] usb 1-1.1: urb status -32
[  165.574948] usb 1-1.1: urb status -32
[  165.577940] usb 1-1.1: urb status -32
[  165.580950] usb 1-1.1: urb status -32
[  165.583980] usb 1-1.1: urb status -32
[  165.584929] usb 1-1.1: USB disconnect, device number 4
[  175.842650] sound midiC1D0: rawmidi drain error (avail = 431, buffer_size = 4096)
1 Like